2-Ethylhexyl Acrylate

2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.

Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions

ANOX® 20 Granular

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging. Similar to ANOX® 20 Powder, but in granular form.

ANOX® 20 Granular is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 570 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

ANOX® 20 Powder

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.

ANOX® 20 Powder is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 650 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

AQ™ 1950 Polymer

Medium molecular weight branched sulfopolyester with a viscosity of 75-135,000 cP, dispersible in water up to 30% without the use of surfactants.

Eastman AQ™ copolyester 1950 is a semi-solid with a characteristic fruity odor completely dispersible is water at levels up to 30% without the use of any surfactants or additives. This grade can be used in repulpable, aqueous or hot-melt adhesive type applications. Odor: Fruity Viscosity @177°C: 75,000-135,000 cP Ring and ball softening point: 115°C Glass transition temperature (Tg): 2.5°C ± 7.5°C Hydroxyl number: 57 mg KOH/g Form: Solid Color: 4 max 100% water dispersible Adhesion to polyolefin substrates Repulpable in both neutral and alkaline conditions Hot melt adhesives

Armeen® 18D, Flake

Octadecylamine used as processing aid in wax emulsions, hydrophobing agent for silica, chemical intermediates and optimal filming amine for corrosion inhibitor

Used as an emulsifying agent, thickener, filming and boundary lubrication Equivalent weight: 269 Appearance at 25C: Solid Melting Point (C): 46 Flash Point (C): >150 Vapor Pressure (mm Hg @20C): <0.1 Specific Gravity (C): 0.791(60), 0.784(70) Chain Length: C18 HLB (Davies Scale 0-40): 8 Viscosity (SSU): 43.5(55), 42.2(65), 39.9(75) Solubility of H2O% (C): 9.3(65), 7.5(70), 4.0(80) Specific Heat (BTU/Lb/F): 0.54 pKb in Water: 3.4 Initial Boiling Point (C): 2(166), 8(196), 32(232), 349(760) Excellent in mold release applications Requires lower temperatures Reduces post mold shrinkage and weight loss and less susceptible to blistering. Facilitate filler and pigment dispersion in paints and inks

Butyl Acrylate

Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

DOWFROST™

Made with DOW PuraGuard™ Propylene Glycol USP/EP, a pharmaceutical grade of monopropylene glycol with specially formulated packages of food grade industrial inhibitors that help prevent corrosion.

Regular DOWFROST™ inhibited propylene glycol (PG) DOWFROST™ is comprised of about 96% PG and 4% corrosion inhibitors. All ingredients are food safe, that is to say they are classified as GRAS (generally regarded as safe) by FDA and are approved as direct food additives. DOWFROST™ is the product of choice for the food processing industry. It is undyed and has water white appearance. DOWFROST™ offers effective heat transfer over a slightly narrower temperature range than DOWTHERM™ fluids: from 0 F to 250 F. The higher minimum recommended temperature for PG based fluids is because PG has higher viscosity and is more difficult to pump at low temperature. DOWFROST™ inhibited PG can provide freeze protection down to -60 F. DOWFROST™ is offered is various concentrations and package sizes. Color: Clear Propylene glycol-based fluid Propylene glycol-based fluid (96%) Water white Made with DOW PuraGuard™ Propylene Glycol USP/EP Low toxicity - complies with FDA and USDA regulations Operating range: 0 to 250° F for heat transfer 60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Food processing Chilling of dairy products & beverages Beer & wine (fermentation cooling) Freezing of concentrated juices, meats, poultry & fish Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWFROST™ Geo 20

A 20% propylene glycol solution that is intended for geothermal heat pump systems.

A ready to use solution that contains specially designed corrosion inhibitors that meet ASTM D1384 corrosion protection requirements. The low glycol content provides lower viscosity and higher heat transfer efficiency. This fluid has a freezing point of 18.5°F. Recommended Use Temperature Range: -5ºC (23ºF) to 100ºC (212ºF) Typical Properties of DOWFROST GEO 20 Fluid: Composition (% by volume) Propylene Glycol – 20 Performance Additive + Water – 80 Color – Yellow to Green Specific Gravity – 1.017 - 1.027 25 / 25ºC (77 / 77 º F) pH of Solution – 9.5 - 10.5 Reserve Alkalinity (min.) – 3.5 ml Formulated for geothermal systems Intended for use in Geothermal heating and cooling systems

DOWFROST™ HD

or beverage application.

A formulation of propylene glycol and a specially designed package of industrial corrosion inhibitors. The fluid is dyed fluorescent yellow to aid in leak detection. Not approved by the USDA or FDA for food use, and is not suitable for food...

DOWFROST™ HD inhibited propylene glycol (PG) is comprised of about 94% PG and 6% corrosion inhibitors. The lower PG content in DOWROST™ HD allows for additional corrosion inhibitors including some which are not approved by FDA as direct food additives. These additional components do not compromise toxicity fluid and provide an enhanced level of corrosion protection which is unsurpassed in the industry. DOWFROST™ HD has a fluorescent yellow color and is capable of operating at higher temperatures than regular DOWFROST™: from 0 F to 325 F. DOWFROST™ HD is intended for low toxicity, non-food processing applications and provides freeze protection down to -60 F. Dowfrost™ HD is offered is various concentrations and package sizes. Color: Green / Yellow Propylene glycol-based fluid Propylene glycol-based fluid (94%) Fluorescent yellow Increased concentration of inhibitors Not USDA/FDA approved industrial / commercial version of DOWFROST Operating range: 0 to 325° F for heat transfer -60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ 4000

A formulation of ethylene glycol that features one of the highest maximum use temperature of any glycol, operating temperature ranges -60°F to 350°F. The fluid is dyed fluorescent orange to aid in leak detection.

DOWTHERM™ 4000 inhibited ethylene glycol (EG) is comprised of about 92% EG and 8% corrosion inhibitors and has a bright fluorescent orange color. The lower EG content allows for a higher concentration of corrosion inhibitors which in turn means DOWTHERM™ 4000 is capable of operating at higher temperatures than DOWTHERM™ SR1 i.e. from -20°F to 350°F. This makes DOWTHERM™ 4000 a higher end, niche type product which is also capable of providing freeze protection down to -60°F. Ethylene glycol-based fluid (92%) Fluorescent orange Increased concentration of inhibitors Efficient heat transfer Operating range: -20°F to 350°F for heat transfer 60°F for burst protection Wide-temperature range operability Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ SR-1

A formulation of ethylene glycol and a specially designed package of industrial corrosion inhibitors with operating temperature ranges of -60°F to 250°F. The fluid is dyed fluorescent pink for leak detection purposes.

DOWTHERM™ SR1 inhibited ethylene glycol (EG) is comprised of about 95% EG and 5% corrosion inhibitors. DOWTHERM™ SR1 is the most popular EG based product within the Dow portfolio. In fact, DOWTHERM™ SR1 is the most widely recognized brand name in the industry. It offers effective heat transfer over a wide temperature range: from -20°F to 250°F and provides freeze protection down to -60°F. Color: Pink Ethylene glycol-based fluid Ethylene glycol-based fluid (95%) Fluorescent pink Efficient heat transfer Operating range: -20°F to 250°F for heat transfer 60°F for burst protection Offered in various package sizes and blends. DOWTHERM™ SR-1 25% DOWTHERM™ SR-1 30% DOWTHERM™ SR-1 35% DOWTHERM™ SR-1 40% DOWTHERM™ SR-1 45% DOWTHERM™ SR-1 50% DOWTHERM™ SR-1 60% Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

Eastman THQ Toluhydroquinone

Highly effective process inhibitor used in the production of highly reactive unsaturated polyesters.

Eastman™ THQ (Toluhydroquinone) is a tan to white crystalline solid that goes through similar chemical reactions as Hydroquinone. However, due to the presence of a methyl group in the ortho position, THQ becomes a highly active inhibitor in the free radical polymerization of vinyl monomers and unsaturated polyesters. Appearance: Off-white solid Flash point: 172°C (342°F) Boiling point: 279°C (534°F) Melting point: 127°C (261°F) Specific gravity: 1.3 Molecular weight: 124.13 CAS: 95-71-6 Better solubility in styrene than Hydroquinone Highly effective cook stabilizer in unsaturated polyesters Good performing antioxidant for oleates, linseed oil, and other nonfood fats and oils Used as an inhibitor, antioxidant, and intermediate manufacturing.

Elvacite® 2016

General purpose low viscosity, low molecular weight methyl methacrylate/n-butyl methacrylate copolymer.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 59 Molecular weight: 60,000 Form: Spherical beads Particle size (Microtrac® D50): 170 - 265 microns Specific gravity: 1.13 Inherent viscosity b: 0.230-0.255 Acid number: 3.5 Moisture (% max): 0.50 Tukon hardness, knoop No. 8 Tensile strength, psi 2,300 Elongation at break (23°C, 50% RH): 2% Excellent hardness Low hazard High gloss Resistance to UV discoloration Fast dissolving Low viscosity Clear, translucent or pigmented metal coatings, heat seal lacquers, traffic marking paints, inks

Elvacite® 2028

Elvacite® 2028 has a low molecular weight therefore making it broad in solubility and compatibility.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 45°C Molecular weight: 59,000 Particle size (D50): 130-220 microns Acid number: 12 Tukon hardness, knoops no: 6 Tensile strength: 800 psi Elongation at break (23°C, 50% R.H.): 75% Inherent viscosity: 0.226-0.257 % Moisture: 0.8 (max) % Methacrylic acid 1.4 - 2.0 Improved pigment dispersion Can be used in brass coatings Soluble in some alcohols Use in no-reactive resins in reactive coatings

Elvacite® 2044

A high molecular weight n-butyl methacrylate polymer useful in adhesives, silk screens and as a plasticizer for harder resins.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Specific gravity: 1.06 @ 25°C Glass transition temp, onset: 20°C Molecular weight: 211,,000 Inherent viscosity: 0.47 - 0.56 % Moisture: 0.3 (max) Improve adhesion Improved outdoor durability

Elvacite® 4345

Anti-caking/anti-bricking version of Elvacite 2044

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Glass transition temp, onset: 20°C Molecular weight: 211,,000 % Moisture: 0.3 (max) Improved adhesion Improved outdoor durability

Epolene® C-10 Polymer

Epolene® C-10 is a low density polyethylene homopolymer with medium molecular weight and low color for use in adhesives, coatings and polymer compounding.

Epolene® C-10 is a branched LDPE polymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 35,000. Polymer Type: LDPE Molecular Weight: 35,000 Mettler Softening Point: 101°C (ASTM D6090) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 18,600 cP @ 125°C 3,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat stability Hot melt adhesives, packaging, automotive coatings, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-13 Polymer

Epolene® C-13 is a low density polyethylene with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

Epolene® C-13 is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000. Polymer Type: LDPE Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

Epolene® C-13P Polymer

Epolene® C-13P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

Epolene® C-13P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000 and is the powder form of Epolene® C-13 Polymer Type: LDPE Product Form: Powder Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

Epolene® C-15 Polymer

Epolene® C-15 is a low density polyethylene polymer with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15 is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in pellet form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-15P Polymer

Epolene® C-15P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in powder form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-16 Polymer

Epolene® C-16 is a maleic anhydride modified, low density polyethylene polymer for use in adhesives, coatings, and color concentrates.

Epolene® C-16 is a branched LDPE homopolymer with maleic anhydrire that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It is well suited for applications requiring compatibility with polyamide. The maleic anhydride modification allows for improved adhesion and improved aging properties in hot melt adhesive formulations. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-16 has a molecular weight of 26,000 and is provided in pellet form. Polymer Type: Ma-PE Molecular Weight: 26,000 Ring and Ball Softening Point: 102°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 2,850 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Improved adhesion High filler tolerance Superior aging properties Color concentrates, automotive, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-16P Polymer

Epolene® C-16P is a maleic anhydride modified, low density polyethylene powder for use in adhesives, coatings, and color concentrates.

Epolene® C-16P is a branched LDPE homopolymer with maleic anhydride that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It is well suited for applications requiring compatibility with polyamide. The maleic anhydride modification allows for improved adhesion and improved aging properties in hot melt adhesive formulations. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-16P has a molecular weight of 26,000 and is provided in powder form. Polymer Type: Ma-PE Molecular Weight: 26,000 Ring and Ball Softening Point: 102°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 2,850 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Improved adhesion High filler tolerance Superior aging properties Color concentrates, automotive, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-17 Polymer

Epolene® C-17 is a low density polyethylene wax with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17 is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17 has a molecular weight of 100,000 and is provided in pellet form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® C-17P Polymer

Epolene® C-17P is a low density polyethylene wax powder with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17P is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17P has a molecular weight of 100,000 and is provided in powder form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® C-18 Polymer

Epolene® C-18 is a low density polyethylene wax modified with maleic anhydride for use in coatings, adhesives and color concentrates.

Epolene® C-18 is a branched LDPE homopolymer modified with maleic anhydride that can be used as a base polymer in concentrate dispersions, coatings and adhesives. It is well suited for applications requiring polyamide compatibility and offers high gloss and good heat seal ability. Epolene® C-18 has a molecular weight of 15,000 and is provided in pellet form. Polymer Type: PE Molecular Weight: 15,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Maleic anhydride grafted automotive, wax coatings, color concentrates

Epolene® E-10 Polymer

Epolene® E-10 is a low-density oxidized polyethylene pellet for use in adhesives, coatings and wax blends.

Epolene® E-10 is an oxidized polyethylene wax with low density and low softening point. It produces stable emulsions by both atmospheric and pressure methods. Epolene® E-10 has a molecular weight of 6,100 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 6,100 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 800 cP @ 125°C Good slip resistance High durability Produces stable emulsions pressure sensitive adhesives

Epolene® E-14 Polymer

Epolene® E-14 is a low-density oxidized polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14 is an oxidized polyethylene wax with low density and low molecular weight. It can be used in color concentrates and as a lubricant in processing rigid and flexible PVC. It is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. Epolene® E-14 has a molecular weight of 4,000 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 4,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 375 cP @ 125°C Good slip resistance High durability Produces stable emulsions NSF listed in PVC melt processes Automotive, Automotive OEM, Pressure sensitive adhesives, wax modification, PVC melt processing

Epolene® E-14E Polymer

Epolene® E-14E is a low-density, low molecular weight oxidized polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14E is an oxidized polyethylene wax with low density and low softening point. It produces stable, low color emulsions by both atmospheric and pressure methods. Epolene® E-14E has a molecular weight of 3,600 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 3,600 Mettle Softening Point: 101°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Good slip resistance High durability & toughness Produces stable emulsions Automotive refinish, Pressure sensitive adhesives, wax modification, floor finishes

Epolene® E-14P Polymer

Epolene® E-14P is a low-density oxidized polyethylene powder for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14P is an oxidized polyethylene wax with low density and low molecular weight. It can be used in color concentrates and as a lubricant in processing rigid and flexible PVC. It is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. Epolene® E-14P has a molecular weight of 4,000 and is supplied in powder form. Polymer Type: Ox-PE Molecular Weight: 4,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 375 cP @ 125°C Good slip resistance High durability Produces stable emulsions NSF listed in PVC melt processes Automotive, Automotive OEM, Pressure sensitive adhesives, wax modification, PVC melt processing

Epolene® E-16 Polymer

Low-density oxidized polyethylene having intermediate properties between Epolene® E-14 and Epolene® E-10 with molecular weight of 5,500.

Epolene® E-16 is an oxidized polyethylene wax with low density and low molecular weight. It provides low-color emulsions for use in textiles, polishes, and coatings. Epolene® E-16 has a molecular weight of 5,500 and is supplied in pellet form. Polymer Type: LDPE Molecular Weight: 5,500 Mettler Softening Point: 100°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 700 cP @ 125°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Produces stable emulsions Automotive refinish, Automotive OEM, Pressure sensitive adhesives, wax modification, floor finishes

Epolene® E-20 Polymer

Epolene® E-20 is a medium-density low molecular weight polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-20 is an oxidized polyethylene wax with medium density and low molecular weight. It has low color, high hardness and a low softening point. Epolene® E-20 has a molecular weight of 7,500 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 7,500 Mettler Softening Point: 111°C (ASTM E 28) Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C High hardness Low color Grease resistance High durability Imparts slip High gloss Automotive, Pressure sensitive adhesives, wax modification

Epolene® E-25 Polymer

Epolene® E-25 is a maleic anhydride modified polypropylene product used in adhesives, coatings and wax blends and as a coupling agent for filled composites.

Epolene® E-25 is a maleic anhydride modified polypropylene pellet for use in adhesives blends, floor polishes and as a compatibilizer or coupling agent in PP composites. Because of its polarity and anhydride functionality it can be useful in laminating and for enhancing strength of composites that utilize fillers such as glass, talc or metals. Polymer Type: Ma-PP Molecular Weight: 12,000 Ring and Ball Softening Point: 157°C Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 300 cP @ 190°C Excellent pigment dispersion Low color High durability Imparts slip High gloss Book-binding, laminating, caulks and sealants, floor polish finishes

Epolene® E-43 Polymer

Epolene® E-43 is a maleic anhydride grafted polypropylene with a molecular weight of 9,100

Epolene® E-43 is a medium molecular weight, maleic anhydride modified polypropylene pellet for use in adhesives blends, floor polishes and as a compatibilizer or coupling agent in PP composites. Because of its polarity and anhydride functionality it can be useful in laminating and for enhancing strength of composites that utilize fillers such as glass, talc or metals. Polymer Type: Ma-PP Molecular Weight: 9,100 Ring and Ball Softening Point: 158°C Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 300 cP @ 190°C Excellent pigment dispersion Low color High durability Imparts slip High gloss Book-binding, caulks and sealants, laminating, floor polish finishes

Epolene® E-43P Polymer

Epolene® E-43P is a maleic anhydride modified polypropylene product used in adhesives, coatings and wax blends and as a coupling agent for filled composites.

Epolene® E-43P is a medium molecular weight, maleic anhydride modified polypropylene powder for use in adhesives blends, floor polishes and as a compatibilizer or coupling agent in PP composites. Because of its polarity and anhydride functionality it can be useful in laminating and for enhancing strength of composites that utilize fillers such as glass, talc or metals. Polymer Type: Ma-PP Molecular Weight: 9,100 Ring and Ball Softening Point: 158°C Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 300 cP @ 190°C Excellent pigment dispersion Low color High durability Imparts slip High gloss Book-binding, caulks and sealants, laminating, floor polish finishes

Epolene® EE-2 Polymer

Epolene® EE-2 is a low molecular weight polyethylene product used in adhesives, wax blends and asphalt modification.

Epolene® EE-2 is a medium density, low molecular weight oxidized polyethylene with excellent hardness. It mixed readily with asphalt making it an excellent modifier. It has a low softening point and low viscosity, which provide hardness, short dry time and gloss. Polymer Type: Ox-PE Molecular Weight: 7,500 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C Excellent pigment dispersion Short dry time High hardness High functionality High gloss Asphalt modification, Pressure sensitive adhesives, wax modification,

Epolene® N-10 Polymer

A polyethylene homopolymer with a viscosity of 1500

N-10 is a polyethylene polymer with a viscosity of 1500 cP that is easily blended with natural or synthetic waxes to enhance properties like tensile strength of wax blends, aid in pigment dispersion, mold release, improve gloss of paper and increase scuff and rub off resistance in printing inks. Polymer Type: Polyethylene Ring and Ball softening Point: 108C Penetration Hardness: 2dmm Viscosity, Brookfield @125C: 1,500 cP Molecular Weigght: 10,000 Increased tensile strength of wax blends Easily blend with natural or synthetic waxes Improve the gloss of paper coatings Aid in pigment dispersion and mold release Improve scuff and rub off resistance in printing inks solvent based adhesives, wax modification, inks, building and construction, packaging

Epolene® N-10P Polymer

Epolene® N-10P is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

Epolene® N-10P is a medium molecular weight low density polyethylene powder that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 10,000 and is available in powder form. Polymer Type: LDPE Molecular Weight: 10,000 Ring and Ball Softening Point: 108°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

Epolene® N-11 Polymer

Epolene® N-11 is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

Epolene® N-11 is a low density polyethylene product that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 5,000 and is available in pellet form. Polymer Type: LDPE Molecular Weight: 5,000 Ring and Ball Softening Point: 107°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 350 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Graphic arts, wax modification, inks, packaging

Epolene® N-11P Polymer

Epolene® N-11P is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

Epolene® N-11P is a low density polyethylene powder that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 5,000 and is available in powder form. Polymer Type: LDPE Molecular Weight: 5,000 Ring and Ball Softening Point: 107°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 350 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Graphic arts, wax modification, inks, packaging

Epolene® N-14 Polymer

Polyethylene polymer with a viscosity of 150 cP that is easily blended with natural or synthetic waxes to enhance properties

Epolene® N-14 aids in pigment dispersion, mold release applications and improves the gloss of paper and coatings. Polymer Type: PE Mettler Softening Point: 108C Penetration Hardness: 3 dmm Viscosity, Brookfield @125C ( 257F): 150 cP Molecular Weight: 4000 Pigment dispersion aid Easy blend with natural and synthetic waxes Low density polyethylene Increases scuff and rub resistance in inks Improved physical properties in paper coatings Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

Epolene® N-14P Polymer

Polyethylene polymer with a viscosity of 150 cP that is easily blended with natural or synthetic waxes to enhance properties.

Identical to Epolene® N-14 but in powder form Polymer Type: PE Mettler Softening Point: 108C Penetration Hardness: 3 dmm Viscosity, Brookfield @125C ( 257F): 150 cP Molecular Weight: 4000 Physical Form: Powder Pigment dispersion aid Easy blend with natural and synthetic waxes Low density polyethylene Increases scuff and rub resistance in inks Improved physical properties in paper coatings Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

Epolene® N-15 Polymer

Low viscosity polypropylene homopolymer with a high melt point and excellent hardness

Epolene® N-15 is used in color concentrates, toner compounds and pigment dispersion aid in polypropylene fiber applications. Polymer Type: PP Mettler Softening Point: 163C Penetration Hardness: <1 dmm Viscosity, Brookfield @125C (257F): Solid at this temp @190C (374F): 700cP Molecular Weight: 12,000 Improved blocking, scuff and abrasion resistance in paraffin wax blends Low molecular weight PP homopolymer Building and construction, hot melt adhesives, solvent based adhesives, wax modification, packaging

Epolene® N-15P Polymer

Low viscosity polypropylene homopolymer with a high melt point and excellent hardness

N-15P is used in color concentrates, toner compounds and pigment dispersion aid in polypropylene fiber applications. Polymer Type: PP Mettler Softening Point: 163C Penetration Hardness: <1 dmm Viscosity, Brookfield @125C (257F): Solid at this temp @190C (374F): 700cP Molecular Weight: 12,000 Physical Form: Powder Epolene® N-15P is similar in properties to N-15, but in powdered form Building and construction, hot melt adhesives, solvent based adhesives, wax modification, packaging

Epolene® N-21 Polymer

Medium density polyethylene with high melt point and hardness compared to other N-type polymers

Epolene® N-21 is a PE wax used in cable filling, printing inks and hot melt adhesive applications Polymer Type: PE Mettler Softening Point: 120C Penetration Hardness: <1 dmm Viscosity, Brookfield @125C (257F): 600 cP Molecular Weight: 6,500 Medium density polyethylene Higher melt point and hardness imparts improved resistance to solvents and oils Improved slump resistance in cable filling and flooding Viscosity modifier in hot melts Lubricity in printing inks Wax modification Wire and Cable

Epolene® N-21P Polymer

Identical to Epolene® N-21 but in powder form

Epolene® N-21 is a PE wax used in cable filling, printing inks and hot melt adhesive applications Polymer Type: PE Mettler Softening Point: 120C Penetration Hardness: <1 dmm Viscosity, Brookfield @125C (257F): 600 cP Molecular Weight: 6,500 Physical Form: Powder Medium density polyethylene Higher melt point and hardness imparts improved resistance to solvents and oils Improved slump resistance in cable filling and flooding Viscosity modifier in hot melts Lubricity in printing inks Wax modification Wire and Cable

Epolene® N-30 Polymer

Epolene® N-30 is PE homopolymer with a viscosity of 1050 cP that can be blended with natural and synthetic waxes.

N-30 can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer Type: PE Mettler Softening Point: 110C Penetration Hardness: 2 dmm Viscosity, Brookfield @125C (257F): 1050 cP Molecular Weight: 9,200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

Epolene® N-34 Polymer

Polyethylene polymer with a viscosity of 450 cP that is easily blended with natural or synthetic waxes to enhance properties.

N-34 can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 5 dmm Viscosity, Brookfield @125 (257F): 450 cP Molecular Weight: 6200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

Epolene® N-34P Polymer

Identical to Epolene® N-34 available in powder form

N-34P can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 5 dmm Viscosity, Brookfield @125 (257F): 450 cP Molecular Weight: 6200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

Epolene® N-35 Polymer

Polyethylene polymer with a viscosity of 700 cP that is easily blended with natural or synthetic waxes to enhance properties.

N-35 can be used in automotive, hot melt adhesives, packaging and wax modification applications. It also improve the gloss of paper coatings Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 3 dmm Viscosity, Brookfield @125 (257F): 700 cP Molecular Weight: 7580 Blends easily with natural or synthetic waxes to increase tensile strength Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification Mold Release

Glacial Acrylic Acid

Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.

Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form

Lithium Carbonate Technical Grade

Lithium Carbonate Technical Grade is a micronized, high-purity product guaranteed with 99.3 wt% of lithium carbonate and a 5 µm D50 particle size.

Lithium carbonate ACS and Tech grades are free-flowing, ordorless white powders with a relatively fine particle size Molecular weight 73.89 Melting point 720ºC Water solubility @ 20°C 1.3 wt% Lowers melting point of glass and enamel formulations Lowers viscosity of glass and enamel formulations Decreases the coefficient of thermal expansion of glass and ceramics Raw material for glass, ceramics, and enamel industries; catalyst for esterification; additive in aluminum electrolysis melts; additive for quick setting cements and grouts;

LOWINOX® CA22

Hindered phenolic antioxidant that is highly resistant to extraction and gives excellent color performance in polyolefins.

LOWINOX® CA22 is an extraction resistant hindered phenolic antioxidant that gives excellent color stability in polyolefins. LOWINOX® CA22 is effective at stabilizing a variety of plasticizers in flexible PVC, as well as hot melt adhesives and styrene copolymers. Appearance: Powder Molecular Weight: 545 g/mol Bulk Density: 380 kg/m³ Melting Point: >183 °C Broad food-contact approvals Excellent color stability Highly extraction resistant LDPE, HDPE, styrene copolymers

LOWINOX® TBM6

Versatile phenolic antioxidant that is especially well suited for wire and cable applications, providing heat stability during processing and end use.

LOWINOX® TBM6 is a versatile hindered thiophenol antioxidant that is especially well suited for medium, high, and extra high voltage wire and cable applications. It also synergizes well with carbon black, acts as an anti-skinning agent in hot melt adhesives, provides heat stability in lubricants, and antiscorch protection for polyurethanes during condensation of TDI on polyesters. LOWINOX® TBM6 has excellent compatibility with peroxides and is highly resistant to thermo-oxidative degradation and washout. Appearance: White crystalline powder Molecular Weight: 358 g/mol Particle Size Distribution: 180-200 microns Assay: 98% minimum Melting Point: 160-164 °C Volatiles: 0.1% max Ash Content: 0.05% max Iron Content: 5 ppm Color APHA: Guaranteed 50 max Excellent long-term heat stability Non-staining Non-discoloring Food contact approvals Synergistic with carbon black Compatible with peroxides Antiscorch protection for polyurethanes Heat stability in lubricants Anti-skinning agent in hot melt adhesives Food packaging, HDPE and LDPE tubes, water and gas pipes, connectors, high voltage cables, greenhouse films

Lucite® 6751

Most optically clear of all Lucite® high molecular weight methyl methacrylate homopolymers.

Lucite® high-quality acrylic resins are designed with exact chemical properties to meet customer's needs. The production process results in pure resin that is optically pleasing. Products are seen in thousands of applications globally. Appearance: beads Rockwell Hardness (M Scale): 81 % Liminance Transmittance (0.12, 3.2mm): 92 Tensile Strength @ 23°C, 50% RH (MPa): 54 Exceptional gloss Very high surface abrasion resistance and hardness Sparkle Crystal Clarity Outstanding Ultraviolet Light Resistance Excellent Resistance to Water, Alcohol, Dilute Acids and Alkalis, Chemical Fumes and Corrosive and Oxidizing Environments

METHOCEL™ 240

METHOCEL™ 240 is a HPMC with a low substitution. It is a high viscosity thickener yielding 40,000 cP, and resulting in a semi-firm gel texture.

METHOCEL™ is a hydroxypropyl methylcellulose (HPMC) thickener. It is a water-soluble, high-purity, non-ionic cellulose ether. METHOCEL™ 240 yields a high viscosity of 40,000 cP at low addition levels. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 30000 - 50000 cP Semi firm gel texture Able to revert back to liquid form when cooling down

METHOCEL™ 240S

METHOCEL™ 240S has the same properties as METHOCEL™ 240, except 240S is surface-treated and can be added directly to an aqueous system to dissolve.

METHOCEL™ is a hydroxypropyl methylcellulose (HPMC) thickener. It is a water-soluble, high-purity, non-ionic cellulose ether. METHOCEL™ 240S yields high viscosity of 40000 cP at low addition levels. The 240S powder is surface-treated and can be added directly to an aqueous system to dissolve. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 30000 - 50000 cP Surface treated Results in a semi-firm gel texture Highly soluble in cold water Able to revert back to liquid form when cooling down

METHOCEL™ A15LV

Methocel A15LV is a low viscosity methylcellulose. With a viscosity from 12 to 18 cP, it is one of the lowest in the Methocel product range. It functions as a rheology modifier in coatings and adhesives.

Methocel A15LV is a low viscosity water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, while various properties are simultaneously present and interact in combination. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A15LV Premium

METHOCEL™ A15LV Premium has the same performance properties as METHOCEL™ A15LV, except this premium product has less impurities. It can be used in pharmaceutical applications.

METHOCEL™ A15LV Premium is a water-soluble polymer derived from cellulose with a very low viscosity. Methocel is a high purity, non-ionic cellulose ether. Besides thickening, binding, Methocel functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, due to the fact that various properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5.0% Max Residue on ignition: 1.5% Max Ash sulphated: 1.5% Max Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Pharmaceutical grade USP/EP/JP compliant Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A4C

METHOCEL™ A4C is a low viscosity methylcellulose thickener. It yields a viscosity of 400 cP at low addition levels.

Methocel A4C is a water-soluble, high purity, non-ionic cellulose ether, and performs as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.50% Sodium Chloride: max 2.0% Viscosity, 2% in water, @20°C, calculated: 350 - 550 cP Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible

METHOCEL™ A4C Premium

METHOCEL™ A4C Premium has the same performance as METHOCEL™ A4C, except this premium product is pharmaceutical compliant.

Methocel A4C Premium is a water-soluble, high purity, non-ionic cellulose ether. It has a low viscosity range of 320 to 480 cps. Methocel is used as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5% Max Residue on ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Viscosity, 2% in water, @20degC, calculated: 320 - 480 cP Pharmaceutical grade Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible USP/EP/JP compliant

METHOCEL™ A4M

METHOCEL™ A4M is a methylcellulose and yields a viscosity of 4,000 cP. It is used as thickener, binder, film former, and water-retention agent.

METHOCEL™ A4M is a water-soluble methylcellulose. Methocel products also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 3,500 - 5,600 cP Yields optimum performance at a lower concentration Water soluble No ionic charge pH stable Thermal gelation which is reversible

METHOCEL™ A4M Premium

METHOCEL™ A4M Premium is a pharmaceutical grade methylcellulose with the same performance properties as METHOCEL™ A4M.

METHOCEL™ A4M Premium is a water-soluble methylcellulose. It yields a viscosity of 4,000 cps. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Viscosity, 2% in water @20°C: 2,663 - 4970 cP Loss on drying: 5% Max Residue on ignition: 1.5% Max Ash, sulphated: 1.5% Max Pharmaceutical grade USP/EP/JP compliant Yielding optimum performance at a lower concentration. Can be added directly to aqueous systems Non- ionic pH stable Thermal gelation which is reversible

METHOCEL™ E15 Industrial LV

METHOCEL™ E15 Industrial LV is an HPMC with a low viscosity of 15 cP. Solutions of this grade can be made at 10% to 15% concentration.

METHOCEL™ E15LV is water-soluble and non-ionic cellulose ether. It is often used as a thickener or binder. Methocel has various other functions which are often simultaneously present in the formulation resulting in economical advantages. It can perform as suspending aid, stabilizers, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 28 - 30% Viscosity, 2% in Water, @ 20degC: 12 - 18 cP Hydroxypropoxyl: 7.0 - 12.0% Forms a semi firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ F4M

METHOCEL™ F4M is a Hydroxypropyl Methylcellulose (HPMC) thickener. At addition levels of 2 to 3% it yields a viscosity of 4,000 cP. It is widely used in ceramics processing, coatings, adhesives and chemical processing.

METHOCEL™ F4M is a water-soluble polymer derived from cellulose. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation METHOCEL™ is an economical preferred choice versus other polymers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 3,500 - 5,600 cP Yielding optimum performance at a lower concentration Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ F4M Food Grade

METHOCEL™ F4M Food Grade has the same characteristics as METHOCEL™ F4M, except its compliance with Food standards.

METHOCEL™ F4M Food is a water-soluble polymer derived from cellulose. This grade complies with the most common Food standards. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 3,500 - 5,600 cP Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Yielding optimum performance at a low concentration Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ F4M Premium

METHOCEL™ F4M Premium is a pharmaceutical grade with the same properties as F4M.

METHOCEL™ F4M is a water-soluble polymer derived from cellulose. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 2,663 - 4970 Methoxyl: 27.0 - 30.0% Hydroxypropoxyl_ 4.0 - 7.5% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras Limited for use in Industrial applications

METHOCEL™ F50

METHOCEL™ F50 is a low viscosity Hydroxypropyl Methylcellulose (HPMC) thickener with a low substitution. It yields viscosity of 50 cPs and forms a semi-firm gel.

METHOCEL™ F50 is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier, further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 40 - 60 cPs Gelation Temp 62-68 °C Forms a semi-firm gel Reversible hot water gelation

METHOCEL™ F50 Food Grade

METHOCEL™ F50 Food Grade has the same characteristics as F50, this grade is compliant with the main Food standards.

METHOCEL™ F50 is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier, further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages compared with other polymers, because multiple properties are present simultaneously. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 40 - 60 cPs Moisture: 5.0% Max Residue on Ignition: 1.5% Max Sulfiting Agents, as Sulfur Dioxide: 10 ppm Max Lead: 2 ppm Max Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Gelation Temp 62-68 °C Forms a semi-firm gel Reversible hot water gelation Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Use in Industrial application where Food grade is required.

Methyl Acrylate

Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

NAUGARD® 445 Granular

Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

NAUGARD® 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

NAUGARD® 445 Powder

Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

NAUGARD® 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

NPG Platelets

Provides excellent weathering and fluidization characteristics.

Eastman NPG™ platelets is a glycol commonly used for high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It can be used as the sole glycol component or used in conjunction with other modifiers to achieve your desired properties. It can be used for food contact coatings in the United States under feral food additive regulations. Appearance: White platelets Molecular weight: 104.15 Crystallization point: 31°C (88°F) Melting point: 124-130°C (255-266°F) Boiling point: 210°C (410°F) Flash point: 132°C (270°F) Specific gravity @ 20°C/20°C: 1.06 CAS: 126-30-7 Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.

POLYOX™ WSR 1105

POLYOX™ WSR 1105 is a polyethylene oxide thickener. It is a water-soluble resin with a viscosity of 8,800 to 17,600 cP.

POLYOX™ WSR 1105 has a molecular weight of 900,000 and has the highest viscosity in the POLYOX range. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 8800- 17600 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity

POLYOX™ WSR 205

POLYOX™ WSR 205 is a water-soluble thickener with a molecular weight 600,000. The viscosity ranges from 4,500 to 8,800.

POLYOX™ WSR 205 is a polyethylene oxide with a viscosity of 4500 - 8800 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 6800 - 8800 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301

POLYOX™ WSR 301 is a water-soluble resin with a high molecular weight of 4,000,000.

POLYOX™ WSR 301 is a polyethylene oxide (PEO) with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301 Fine Powder NF

POLYOX™ WSR 301 Fine Powder NF has same characteristic as POLYOX™ WSR 301, except this grade is pharma compliant.

POLYOX™ WSR 301 is a polyethylene oxide with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% National Formulary Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 303

POLYOX™ WSR 303 has a molecular weight 7,000,000 and the viscosity ranges from 7,500 to 10,000 cP.

POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 7500 - 10000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 308

POLYOX™ WSR 308 is a polyethylene oxide thickener. It has a high molecular weight of 8,000,000 and a viscosity range of 10,000 to 15,000.

POLYOX™ is a water-soluble resin and used as binder, lubricant, thickener and water retention aid in various applications. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. POLYOX™ WSR 308 has the highest molecular weight of the POLYOX range. Viscosity: 10000 - 15000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic Available in 140 lb and 960 lb drums

POLYOX™ WSR Coagulant

POLYOX™ WSR Coagulant is a PEO thickener with a molecular weight of 5,000,000.

POLYOX™ WSR Coagulant is a water-soluble polymer with a viscosity range from 5500 to 7500 cP. POLYOX is widely used as binder, lubricant, thickener and water retention aid. Viscosity: 5500 - 7500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N10

POLYOX™ WSR N10 is a polyethylene oxide and water soluble thickener. It has a molecular weight of 100,000 and yields a viscosity of 12 to 50 at moderate addition levels.

POLYOX are water-soluble resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N10 has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. It is a recommended grade for seed coatings. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N10 100 Mesh

POLYOX™ WSR N10 100 Mesh has the same properties than POLYOX™ WSR N10 100, except this has finer particles.

POLYOX are water-soluble polyethylene oxide resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N10 mesh has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. This mesh grade has a smaller particle size. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N12K

POLYOX™ WSR N12K is a water-soluble polymer and has a molecular weight of 1,000,000. It yields a viscosity of 400 to 800 cP at 2% addition level.

POLYOX are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N12K has a relative low viscosity of 400-800 cP. Viscosity: 400 - 800 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000

POLYOX™ WSR N3000 LS is a water-soluble resin with a relative high molecular weight of 400,000. It yields a viscosity of 2,250 to 4,500 at moderate addition levels.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000 LS

POLYOX™ WSR N3000 LS has the same characteristics as POLYOX™ WSR N3000, except LS version has a low silicon dioxide level of less than 1.5WT%.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.0 - 1.5 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N60K

POLYOX™ WSR N60K is a PEO polymer with a molecular weight of 2,000,000.

POLYOX™ WSR 60K is a polyethylene oxide with a viscosity of 2000 - 4000 cP in a 2% aqueous solution. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2000 - 4000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N750

POLYOX™ WSR N750 is a water-soluble thickener with a molecular weight of 300,000. It has a viscosity range of 600 to 1,200 in a 5% solution.

POLYOX™ WSR N750 is widely used as seed coatings, wet-tack in paper adhesives, thickener in industrial cleaning products and coatings and paint removers for building and construction. In fluorescent lamp phosphors the N750 is used as binder. POLYOX™ is a polyethylene oxide thickener and water-soluble. Is functions as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Viscosity: 600 - 1,200 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N80

POLYOX™ WSR N80 is a water-soluble PEO thickener with a molecular weight of 200,000. It has a low viscosity of 65 to 115 cP.

POLYOX are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N80 is one of the lower molecular weight grades of the POLYOX range. Viscosity: 65 - 115 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

Sodium PYRION™ 40%

Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

UCARTHERM™ HTF PM 6141

A formulation of ethylene glycol and specifically designed inhibitor packages with operating temperature ranges of -60°F to 250°F.

Manufactured with 100% virgin ethylene glycol and specifically formulated with heavy-duty industrial inhibitor packages that prevent corrosion, these fluids are widely used for closed-loop, process heating and process cooling. The inhibitors are easily maintained, long lasting and replenishable, which means intervals between fluid change-outs are extended and fluid expense is minimized. Ethylene glycol-based fluid Wide temperature range operability HVAC; Oil & Gas; Immersion freezing; Process cooling; Process heating; Solar heating; Radiant Heating; Thermal Energy Storage; Geothermal; Snow Melt Systems; Fermentation Cooling

UCON™ HTF 500

Formulated for high-temperature, liquid-phase heat transfer in systems requiring bulk temperatures up to 500°F.

UCON™ HTF 500 is compatible with most common metals, including all steels, iron, aluminum, copper and copper alloys and is noncorrosive. UCON™ HTF 500 has been used in many high temperature applications and is often recommended by heating equipment manufactures. Viscosity at 100°F: 62 Specific gravity: 1.038 Pour Point: -55 Boiling Point: None- nonvolatile liquid Flashpoint (ASTM D92): 575 Fire Point (ASTM D92): 600 Viscosity Index: 200 High heat transfer efficiency Water soluble Fantastic materials compatibility Long lasting Lower maintenance costs High flash point High fire point Easy to use with conventional equipment Chemical processing Laminating and calendaring rolls Dies and molds in the rubber and plastics industry Drying rolls and ovens Die-cast zinc and aluminum alloys Intended for use in closed circulating systems.

UV9300

UV9300 is a release coating designed to be used with UV9380C or UV9390C. General purpose with low to medium release force.

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. % Solids: >99% Viscosity: 300 cstks @ 25°C Epoxy equivalent weight: 950 grams/mole oxirane Specific gravity: 0.99 Fast UV cure Low temperature cure Easy to handle and use Formulation flexibility Developed for multi-roll coating

UV9315

UV9315 is a very reactive polymer, it is often blended with UV9380C or UV9390 in a photo catalyst solution prior to use. It also provides easy to medium release from rubber and acrylic based adhesives.

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Solids: >99% Viscosity: 250 cstk @ 25°C Epoxy equivalent weight: 1150 grams/mole oxirane Specific gravity: 0.99 Fast UV cure Low temperature cure Minimal silicone transfer Non-toxic

UV9380C

Intended to be used with UV9300, UV9315, UV9400, UV9430, UV9440E, and UV9500 as a photoinitiator.

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 100 cstks @ 25°C Specific gravity: 1.06 @ 25°C Lbs/gal: 9.1 @ 25°C Antimony: 6.5 - 7.0 wt % Wavelength: 255, 385 lambda max, (nm) Fast UV cure Efficient cure at low temperatures Low toxicity Low viscosity Easy to handle

UV9390C

UV9390C is a photo catalyst designed to be used with Silforce™ UV cure release system. Used in 1 to 4 parts of UV 9390C per 100 parts of coating for optimal performance.

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 100 cstks @ 25°C Specific gravity: 1.06 @ 25°C Lbs/galons: 9.14 @ 25°C UV absorption peaks: 255 nm (major peak); 385 nm (minor peak) Compatible with non-polar cationic curing systems Shelf-stability for a year Easy to handle Low viscosity Low toxicity

UV9400

Same as UV9300 except viscosity is 225 mPa.S @ 25°C

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. % Solids: >99% Viscosity: 225 cstks @ 25°C Epoxy Equivalent Weight: 1700 grams/mole oxirane Fast UV cure Low temperature cure Low silicone transfer Flat release profile Non toxic Low viscosity

UV9430

UV9340 is a controlled release polymer. Most efficient when used with UV9315 or UV9400.

UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 500 cstk @ 25°C Specific gravity: 0.999 @ 25°C Lbs/gallon: 8.34 Epoxy equivalent weight: 1300 grams/mole oxirane Fast photo cure in ambient atmosphere Low temperature cure Solvent-free Tight release

WALOCEL™ CRT 100 GA

WALOCEL™ CRT 100 GA is a carboxymethyl cellulose (CMC) in granular form with a low viscosity of 100 cP. It provides a crystal clear solution free of fibers.

WALOCEL™ CRT 100 GA is a low viscosity CMC. This granular grade can be added directly to water, and has a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 110 - 160 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Improving stickiness in water-based adhesives. In batteries used as binder for anode components. Offers stability during ceramic forming and in the oven.

WALOCEL™ CRT 100 PA

WALOCEL™ CRT 100 PA is similar to CRT 100 GA, except this is a powder grade. It can be blended with other dry ingredients prior to addition to water.

WALOCEL™ CRT 100 PA is a low viscosity CMC. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 110 - 160 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature Provides a clear solution High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Improving stickiness in water-based adhesives. In batteries used as binder for anode components. Offers stability during ceramic forming and in the oven.

WALOCEL™ CRT 1000 GA

WALOCEL™ CRT 1000 GA is a granular CMC with a viscosity of 1,000 cP.

WALOCEL™ CRT 1000 GA is a low viscosity CMC. This granular grade has a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. It provides a clear solution. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 550 - 800 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Recommended grade in paper and ceramic applications.

WALOCEL™ CRT 1000 PA 07

WALOCEL™ CRT 1000 PA 07 has similar properties than CRT 1000 GA, except this is a powder grade.

WALOCEL™ CRT 1000 PA 07 is a low viscosity CMC with a substitution degree of 0.7. This powder grade can be blended with other ingredients before dissolving in water. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Walocel with low viscosity grades provide clear solutions. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 300- 600 cP Substitution degree: 0.65 — 0.80 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 2000 PA

WALOCEL™ CRT 2000 PA is a carboxymethyl cellulose (CMC) powder with a viscosity of 2,000 cP.

WALOCEL™ CRT 2000 PA is a CMC in powder form. This low viscosity powder grade provides a clear solution. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 1900 - 2800 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 20000 GA

WALOCEL™ CRT 20000 GA is a granular carboxymethyl cellulose (CMC) with a viscosity of 20,000 cP.

WALOCEL™ CRT 20,000 GA is a granular CMC grade with a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. It provides a clear solution. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 1,900 - 2,600 cP Substitution, degree of 0.75 — 0.85 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 30 PA

WALOCEL™ CRT 30 PA has the lowest viscosity of the WALOCEL™ product range. It yields a viscosity of 30 cP.

WALOCEL™ CRT 30 PA is a powder which can be blended with other solid ingredients prior to the addition of water. It is a thickener and binder, has excellent water-binding and film-forming properties in adhesives, batteries and ceramics. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 25 - 30 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 30000 GA

WALOCEL™ CRT 30000 GA is a granular carboxymethyl cellulose (CMC) with a high viscosity of 30,000 cps at 2% concentration.

WALOCEL™ CRT 30000 GA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 3,000 - 4,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 40000 GA

WALOCEL™ CRT 40000 GA is a high viscosity granular CMC of 40,000 in a 2% aqueous solution.

WALOCEL™ CRT 40000 GA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 4,000 - 5,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 40000 PA

WALOCEL™ CRT 40000 PA is similar to CRT 40000 GA, except this is a powder grade.

WALOCEL™ CRT 40000 PA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. This Powder grade can be blended with other dry ingredients prior to addition to water. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 4,000 - 5,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 60000 GA

WALOCEL™ CRT 60000 GA is a granular carboxymethyl cellulose (CMC). With 60,000 cP it has the highest viscosity of all WALOCEL™ products.

WALOCEL™ CRT 60000 GA is high viscosity binder and thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 0.5% aqueous solution (dry basis), 25°C: 1,100 - 2,000 cP Substitution, degree of 0.7 — 0.8 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 60000 PPA 07

WALOCEL™ CRT 60000 PPA 07 has the same properties as CRT 60000 GA, except it is a powder grade which can be blended with other ingredient prior to the addition to water.

WALOCEL™ CRT 30000 PPA 7 is a high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 0.5% aqueous solution (dry basis), 25°C: 1,100 - 2,000 cP Substitution, degree of 0.7 — 0.8 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.