There are no products found that meet this criteria.

• 

  ADCOTE™ 1544H

  Waterborne primer designed for extrusion coating applications on cellulosic substrates.

  Adcote™ 1544H is a PEI-based waterborne primer designed to improve adhesion between paper and polyethylene extrudates. This grade can be used on smooth finished calendared or coated paper and offers good adhesion even with low coating weights of PE or changes in paper surface. Performance is optimized when the extrudate is fully oxidized. Chemistry: PEI Carrier: Water Color: Translucent Application Methods: Gravure, Smooth roll transfer Density: 8.5 lbs/gallon Supplied Solids: 10% Drying Web Temperature: 150-180°F Viscosity: 12 sec, No. 3 Zahn cup Improved adhesion with coating weights as low as 3-5 lbs/ream Strong adhesion even at lower extrudate temperatures Moisture Resistant Low Odor Snack Food Packaging, Frozen Food packaging, Meat and Cheese Packaging, General Industrial, Confectionary Packaging

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 462.97lb Drum

• 

  ADCOTE™ 313

  PEI-based waterborne primer designed for extrusion coating applications on cellulosic substrates.

  ADCOTE™ 313 is a water-based primer used to promote adhesion between paper and paperboard and polyethylene based extrudates and Surlyn. It is supplied at high solids and can be used on calendared or coated substrates. ADCOTE™ 313 will improve adhesion even with coating weights as low as 3-5 lbs/ream PE. Application Methods: Gravure coater, smooth roll transfer Chemistry: PEI Carrier: Water Density: 8.5 lbs/gallon Supplied Solids: 20% Applied Solids: 1-2% Viscosity: 17 sec., #3 Zahn Drying Web Temperature: 150-180 °F Improved adhesion at low coating weights Moisture resistance Low odor Meat and Cheese packaging, Frozen food, general industrial, snack food packaging, confectionary packaging

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 39.9lb Pail, 462.97lb Drum

• 

  Lupasol® FG

  Multi-functional cationic polyethylenimine with a branched polymer structure.

  Lupasol® FG is a clear, colorless cationic polyethylenimine with a branched polymer structure. Average molar mass: 800 Viscosity @ 20°C: 5000 Concentration: 99% Adhesives, complexing, coatings and paints, pigment manufacture, and protein immobilization.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 264.55lb Drum

• 

  Lupasol® FT P

  50% aqueous solution of polyethylenimine with a molecular weight around 750,000.

  Lupasol® FT P is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 750,000 Viscosity @ 20°C: 25,000 Concentration: 50% Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 2314.85lb Tote, 264.55lb Drum

• 

  Lupasol® FT WF

  Waterfree polyethylenimine with a molecular weight around 25,000.

  Lupasol® FT WF is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 25,000 Viscosity @ 20°C: 200,000 Concentration: 99% Color: clear to slightly cloudy, colorless to yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 264.55lb Drum

• 

  Lupasol® G 20

  50% aqueous solution of polyethylenimine with a molecular weight around 1,300.

  Lupasol® G 20, a 50% aqueous solution, is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 1,300 Viscosity @ 25°C: 1,500 Concentration: 50% Color: clear to slightly cloudy, colorless to rarely yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 2314.8lb Tote, 264.55lb Drum

• 

  Lupasol® G 20 WF

  Waterfree polyethylenimine with a molecular weight around 1,300.

  Lupasol® G 20 Waterfree, is a anhydrous multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 1,300 Viscosity: 8,000 Concentration: 98% Color: clear, colorless to yellowish liquid Anhydrous Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 264.55lb Drum

• 

  Lupasol® PR 8515

  Waterfree polyethylenimine with a molecular weight around 2,000.

  Lupasol® PR 8515, is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Avg molar mass: 2,000 Viscosity: 14,000 Concentration: 98% Color: clear, colorless to rarely slightly yellowish liquid Compatible with cationic and nonionic systems Absorbs strongly on negatively charged surfaces Crosslinking agent Anhydrous Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 264.55lb DR264.55LB