There are no products found that meet this criteria.

• 

  ADCOTE™ 2140

  Solution adhesive based on Mor-Ester 49021-P polyester resin; it can be used as a primer, heat seal coating, an ink base or as an adhesive

  Adcote 2140 is a solution adhesive based on Mor-EsterTM 49021-P polyester resin. Excellent adhesion is achieved to some plastic and most metal surfaces. The performance of Adcote 2140 resin can be further enhanced with the use of recommended coreactants. Weight Solids 34-36% Viscosity, cps 300-700 Weight/Gallon 8.0-8.3 lb Solvents Toluene Recommended Diluents MEK, ethyl acetate, toluene, etc. Coreactant Coreactant F** Mix Ratio 100 pbw Adcote 2140 5 pbw Coreactant F Shelf Life 270 days (unopened containers) Hard, brittle, coatings powder coatings Adcote 2140 resin can be used a primer, heat seal coating, an ink base or as an adhesive.

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 440.92lb Drum

• 

  ADCOTE™ 313

  PEI-based waterborne primer designed for extrusion coating applications on cellulosic substrates.

  ADCOTE™ 313 is a water-based primer used to promote adhesion between paper and paperboard and polyethylene based extrudates and Surlyn. It is supplied at high solids and can be used on calendared or coated substrates. ADCOTE™ 313 will improve adhesion even with coating weights as low as 3-5 lbs/ream PE. Application Methods: Gravure coater, smooth roll transfer Chemistry: PEI Carrier: Water Density: 8.5 lbs/gallon Supplied Solids: 20% Applied Solids: 1-2% Viscosity: 17 sec., #3 Zahn Drying Web Temperature: 150-180 °F Improved adhesion at low coating weights Moisture resistance Low odor Meat and Cheese packaging, Frozen food, general industrial, snack food packaging, confectionary packaging

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 39.9lb Pail, 462.97lb Drum

• 

  ADCOTE™ 37-220

  Water-borne ionomer dispersion heat seal coating for packaging, medical, and industrial applications.

  Adcote™ 37-220 is an ionomer dispersion in water and may be used as is, diluted, thickened, or cross-linked for enhanced properties in packaging, medical and industrial applications. Solids: 31% Viscosity range: 250-1200 cps pH: 9.8 Gallon Weight: 8.2 lb Volatile Component: Water Wet Appearance: White liquid Dry Appearance: Colorless film Minimum Block Temperature: 180°F (66°C) Minimum Heat Seal Temperature: 250°F (93°C) Freeze-Thaw Stability: None; protect from freezing Shelf Life: 270 Days (Unopened Containers Stored in Cool Dry Place) Excellent adhesion to metal and papers Strong bonds and laminations Aqueous dispersion No VOC content High hot tack Fast heat seal bond set up Low activation temperature Fast heat seal cycles Easily modified Broad application use No volatile amines Stable pH in storage and use Moisture and grease resistant Ideal for packaging difficult products Heat seal coatings, compounding base, saturants, primer, protective coatings, medical packaging, adhesives, binder

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 429.9lb Drum

• 

  ADCOTE™ 37P295-BW

  Water-based dispersion that is based on high molecular weight ethylene interpolymers.

  ADCOTE™ 37P295-BW is suggested for use as a heat seal coating, pigment binder, laminating adhesive, primer, or as a fomulating base to produce other functional coatings. It is formulated to seal polyester, both treated and untreated polyethylene, polypropylene films, aluminum foil, and PVDC coated glassine paper. Binding resin, Blending or modifying resin Food and medical and industrial packaging Heat seal coating Low temp heat seal Primer

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 429.9lb Drum

• 

  ADCOTE™ 37R972

  Very low heat activating, water based dispersion based on high molecular weight ethylene interpolymers. Viscosity: 150 cPs.

  Adcote™ 37R972 is a very low heat activating, water-based dispersion that is based on high molecular weight ethylene interpolymers. It exhibits good heat seal bonds when exposed to low temperature heat sealing conditions. It also has good clarity that may be achieved at low web temperatures. Solids 45% Viscosity 150 cps @ 77°F Density 8.2 lb/gal pH 10 Shelf life 360 days (unopened containers) Freeze/thaw stability None Minimum heat activation range 150°F to 225°F Good Clarity Low Activation Temperature Low Odor Peelable Bonds Adcote 37R972 is suggested for use as a heat seal coating, pigment binder, laminating adhesive, primer, and as a formulating base to produce other functional coatings It can be applied to paper, various treated films, and aluminum foil. Adcote 37R972 is formulated to seal to polyester, polyethylene, polypropylene, aluminum foil, and PVDC-coated glassine paper.

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 39.9lb Pail, 429.9lb Drum, 429.9lb Drum

• 

  ADCOTE™ 89R3

  One-component adhesive for laminating film to glass.

  Adcote™ 89R3, a solvent based, one-component adhesive for laminating film (particularly polyester) to glass, It is a more rapidly adherent version of Adcote 89R1T. Solids: 34% Viscosity: 225 cps Weight/Gallon: 7.7 lb Solvents: Methyl Ethyl Ketone/Toluene Diluents: Methyl Ethyl Ketone, Toluene Great optical properties Non-tacky surface Freedom to reapply the film if defect appears Free from heat deformation problems Resistant to high humidity UV resistant Solar control window film

  Manufacturer: Dow | Product Line: Dow Laminating Adhesives | Package Sizes: 399.04lb Drum

• 

  Elvacite® 2044

  A high molecular weight n-butyl methacrylate polymer useful in adhesives, silk screens and as a plasticizer for harder resins.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Specific gravity: 1.06 @ 25°C Glass transition temp, onset: 20°C Molecular weight: 211,,000 Inherent viscosity: 0.47 - 0.56 % Moisture: 0.3 (max) Improve adhesion Improved outdoor durability

  Manufacturer: Dianal | Product Line: Elvacite® Specialty Acrylic Resins | Package Sizes: 44lb Bag

• 

  Lupasol® FT P

  50% aqueous solution of polyethylenimine with a molecular weight around 750,000.

  Lupasol® FT P is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 750,000 Viscosity @ 20°C: 25,000 Concentration: 50% Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 2314.85lb Tote, 264.55lb Drum

• 

  Lupasol® FT WF

  Waterfree polyethylenimine with a molecular weight around 25,000.

  Lupasol® FT WF is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 25,000 Viscosity @ 20°C: 200,000 Concentration: 99% Color: clear to slightly cloudy, colorless to yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 264.55lb Drum

• 

  Lupasol® G 20

  50% aqueous solution of polyethylenimine with a molecular weight around 1,300.

  Lupasol® G 20, a 50% aqueous solution, is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 1,300 Viscosity @ 25°C: 1,500 Concentration: 50% Color: clear to slightly cloudy, colorless to rarely yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.

  Manufacturer: BASF | Product Line: Lupasol® Polyethylenimine Adhesion Promoters | Package Sizes: 2314.8lb Tote, 264.55lb Drum

• 

  SR500

  PSA primer suitable for silicone rubber panel and gap gasket. It contains 9-13% solids and is condensation cured.

  SilGrip™ Pressure Sensitive Adhesives (PSA) adhere difficult to bond surfaces, such as silicone. Often stable in harsh environments, they are resistant to moisture, sunlight and extreme weather. Silicic acid, ethyl ester: 0.1-1% Hexane: 60-100% Tetraethyl silicate: 1-5% Toluene: 5-10%

  Manufacturer: Momentive | Product Line: Silgrip™ Pressure Sensitive Adhesives | Package Sizes: 30lb Pail

• 

  SRC18

  Amino alkoxy Silane liquid which promotes all SilGrip™ grades in condensation cure but especially recommended with PSA529 and PSA6573A. Not recommended for PSA tapes.

  SilGrip™ Pressure Sensitive Adhesives (PSA) adhere difficult to bond surfaces, such as silicone. Often stable in harsh environments, they are resistant to moisture, sunlight and extreme weather. Identification: Amino propyltriethoxysilane Formula: (CH3CH20)3SiCH2CH2NH2 Color and odor: Colorless liquid, characteristic amine-like odor Purity (VPC): 99.4% Cured at room and elevated temperatures Laminating and bonding applications Continued reaction with polymers over time

  Manufacturer: Momentive | Product Line: Silgrip™ Pressure Sensitive Adhesives

• 

  SS4191A

  SS4191A is used in conjunction with SS4191B as a gum solution and crosslinker. Also SS4192C can be used as a catalyst, and SS4259C as an accelerator.

  SS4191 is a component system to produce a coating bath. Use proper components for optimal stability when formulating a bath. Reference processing recommendations for suggested formulations as well as blending/mixing instructions. Haze: 30 max. Appearance: OK Solids: 28-30% Solvent: Toluene Base component of a solvent-borne coating Produces premium release coating for silicones Excellent release properties against toughest adhesives Defect-free low-coat-weight liners Easily applied using Mayer rod technique

  Manufacturer: Momentive | Product Line: Silforce™ Release Coatings | Package Sizes: 35lb Pail, 393lb Drum

• 

  SS4255

  Release Modifier.

  Component system to produce a coating bath. Use proper components for optimal stability when formulating a bath. Reference processing recommendations for suggested formulations as well as blending/mixing instructions. Boiling point: 138°C Vapor pressure: 5.04 mm HG @ 20°C Physical state: Liquid Odor: Aromatic Color: Colorless Specific gravity: 1.01 Density: 1.07 g/cm3 Base component of a solvent-borne coating Produces premium release coating for silicones Excellent release properties against toughest adhesives Defect-free low-coat-weight liners

  Manufacturer: Momentive | Product Line: Silforce™ Release Coatings | Package Sizes: 450lb Drum

• 

  SS4259C

  SS4259C cure accelerator for SS4191 system.

  Component system to produce a coating bath. Use proper components for optimal stability when formulating a bath. Reference processing recommendations for suggested formulations as well as blending/mixing instructions. Haze: 30 max. Appearance: OK Color gardner: 2 max Solids: 48-52% Solvent: Toluene Base component of a solvent-borne coating Produces premium release coating for silicones Excellent release properties against toughest adhesives Defect-free low-coat-weight liners Easily applied using Mayer rod technique

  Manufacturer: Momentive | Product Line: Silforce™ Release Coatings | Package Sizes: 35lb Pail