ANOX® 1315

Low viscosity liquid phenolic antioxidant with some FDA approvals.

ANOX® 1315 is a highly effective, non-discoloring, liquid antioxidant. It is ideal for a variety of polymers, engine and cutting lubricating oils, and polyols used in polyurethane foams for both storage and scorch protection. Appearance: Viscous, clear yellow liquid Melting Point: -56 °C Specificity Gravity (@ 20 °C): 0.94 g/cm³ Viscosity (@30 °C): ~200 mPa · s Flash Point: 229 °C Liquid form FDA approvals for use in specific polymers Low viscosity allows for extra easy handling High antioxidant efficiency in many different polymers including polyolefins, synthetic rubbers, PVC, polyols (PU) and lubricant oils

ANOX® 20 Granular

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging. Similar to ANOX® 20 Powder, but in granular form.

ANOX® 20 Granular is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 570 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

ANOX® 20 Powder

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.

ANOX® 20 Powder is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 650 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

AQ™ 38S Polymer

Solid-form grade that disperses directly in hot water and aids in formation of clear films at room temperature.

AQ™ 38S is a sulfopolyester polymer easily dispersed in hot water without the use of amines, co-solvents, surfactants or additives. It also aids in the dispersion of hydrophobic ingredients in water based products to form clear films at room temperature. Due to it's low Tg, AQ™ 38S forms flexible films on skin, making it especially suitable as a film former in cosmetics and personal care applications. Form: Pellets Color: Pale amber Glass transition temperature (Tg): 35-38°C dry polymer Inherent viscosity: 0.32-0.40 dL/g Melt viscosity @200°C: 9700 poise Acid number: <2 mg KOH/g Hydroxyl number: <10 mg KOH/g Bulk density: 6.5 lb/gal Aids emulsification of organic ingredients Low viscosity hairsprays Quick drying Water/humidity resistant Neutralizing amine not needed Adhesives and sealants Paints, coatings and primers Printing inks and overprints Textile sizes Sunscreen Lotions, creams and sprays

Butyl Acrylate

Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

CELLOSIZE™ EP-09

CELLOSIZE™ EP-09 is a water-soluble cellulose thickener. It has the lowest viscosity of the CELLOSIZE™ product range of 90-160 cP. EP stands for emulsion polymerization grade.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. EP-09 is surface treated to increase dispersion in water. Viscosity: 90 to 160 cP Volatiles: 6 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-100MH

CELLOSIZE™ QP-100MH has the highest molecular weight of all CELLOSIZE products. This grade provides a high thickening efficiency.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-100MH is widely used as thickener and yields a viscosity of 4,400 tp 6,000 cP. This grade provides the most pseudoplastic rheology and very effective where high thickening is desired. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 1.50 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective thickener Film former Good chemical compatibility

CELLOSIZE™ QP-15000H

CELLOSIZE™ QP-15000H is a cellulosic thickener with a medium molecular weight. As a general purpose thickener it is used in coatings, cleaners and adhesives.

CELLOSIZE™ QP-15000H EUR yields a viscosity of 1,100 to 1,500 cP. CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 1,100 to 1,500 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-300

CELLOSIZE™ QP-300 is a hydroxylethyl cellulose (HEC) polymer with a medium viscosity of 300-400 cP. It can be used as a thickener and film former.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 300 to 400 cP Volatiles: 5.0 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Thickener Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-30000H

CELLOSIZE™ QP-30000H is a general purpose thickener with a high molecular weight. It yields viscosity of 1,500-2,400 cP at low addition levels.

CELLOSIZE™ QP-30000H is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-30000H has a medium molecular weight. Viscosity: 1,500 to 2,400 cP Volatiles: 6 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-4400H EUR

CELLOSIZE™ QP-4400H is a medium viscosity water-soluble cellulosic polymer. This HEC is a general purposed thickener for various applications. It yield a viscosity of 4,800-6,000 cP at low addition levels.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 0.80 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-52000H

CELLOSIZE™ QP-52000H has a high molecular weight water-soluble thickener. It is a efficient thickener and commonly used in adhesives and cleaning products.

CELLOSIZE™ QP-52000H is due to its high molecular weight a very efficient thickener. CELLOSIZE™ hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE™ include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 2,400 - 3,000 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

DOWICIDE™ 1E

99% active ingredient, solid formulation, approved for end-use (preservation)

These versatile group of antimicrobials includes products that are broad-spectrum, ready-to-use, and soluble in water solvents and oils. Odor: Mild Phenolic Melting point/range: 56.9°C (134.4°F) Boiling point (760 mmHg): 286°C (547°F) Vapor Pressure: 0.00162 mmHg at 25 °C (77°F) Auto-ignition temperature: 530°C (986°F) Broad spectrum bactericide, fungicide, and virucide Excellent in high pH (> 8.0) systems High temperature stability (> 80°C) Non-formaldehyde releasing Fast-acting Readily biodegradable Preservation for glues and adhesives, concrete admixtures, slurries, ceramics, polishes, stains and paints.

Eastman DTBHQ Crystalline

Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).

Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.

Eastman MTBHQ Dry

Secondary inhibitor (co-inhibitor) and antioxidant for nonfood fats and oils.

Eastman™ MTBHQ (mono t-butyl hydroquinone) is commonly used as a polymerization inhibitor and antioxidant in many industrial applications. Effective in higher temperatures due to its higher solubility and potency compared to unsubstituted hydroquinone. Appearance: Light tan solid Flash point: 171°C (340°F) Boiling point: 295°C (563°F) Melting point: 125°C (257°F) Specific gravity 20°C/20°C: 1.05 Molecular weight: 166.22 CAS: 1948-33-0 Very effective polymerization inhibitor Good performing antioxidant in unstable organic liquids Excellent performance as a heat and stabilizer for pressure-sensitiveness adhesives Used as a polymerization inhibitor and industrial antioxidant in many applications.

Elvacite® 1035

Very low molecular weight methacrylate polymer. Vinyl end groups are available for further reactions with styrene, acrylates, and acrylonitrile.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Sold bead Glass transition temp, onset: 82°C Molecular weight: 6,000 Brookfield viscosity (cP) @ 50% in toluene: 350 – 640 % Non-volatile (minimum): 98.5 Very low viscosity Improved flow Excellent weatherability and chemical resistance High gloss and hardness Low pigment reactivity Resistance to discoloration Transparency

Elvacite® 2016

General purpose low viscosity, low molecular weight methyl methacrylate/n-butyl methacrylate copolymer.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 59 Molecular weight: 60,000 Form: Spherical beads Particle size (Microtrac® D50): 170 - 265 microns Specific gravity: 1.13 Inherent viscosity b: 0.230-0.255 Acid number: 3.5 Moisture (% max): 0.50 Tukon hardness, knoop No. 8 Tensile strength, psi 2,300 Elongation at break (23°C, 50% RH): 2% Excellent hardness Low hazard High gloss Resistance to UV discoloration Fast dissolving Low viscosity Clear, translucent or pigmented metal coatings, heat seal lacquers, traffic marking paints, inks

Elvacite® 2042

A high molecular weight ethyl methacrylate polymer that is alcohol tolerant and yields tough, abrasion-resistant coatings. Slight softer than Elvacite®2013.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 65°C Molecular weight: 220,000 Particle size (D50): 110-180 microns Acid number: 0 Tukon hardness, knoops no: 11 Tensile strength: 5,400 psi Elongation at break (23°C, 50% R.H.): 25% Inherent viscosity: 0.768-0.896 % Moisture: 0.5 (max) Dissolves at room temperature High molecular weight Broadly compatible for use in abrasions-resistant coatings

Elvacite® 2042A

Elvacite® 2042A is the same as 2042, however it is non-reactive specifically used in reactive systems.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 65°C Molecular weight: 220,000 Particle Size (D50): 110-180 microns Acid number: 0 Tukon hardness, knoops no: 11 Tensile strength: 5,400 psi Elongation at break (23°C, 50% R.H.): 25% Inherent viscosity: 0.768-0.896 % Moisture: 0.5 (max) Dissolves at room temperature High molecular weight Broadly compatible for use in abrasions-resistant coatings

Elvacite® 2697

Elvacite® 2697 is useful in clear, translucent or pigmented metal lacquers. It is a fast dissolving, low viscosity resin for lacquer and toner use. Elvacite® 2697 is non-reactive for use in reactive systems.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 50 Molecular weight: 60,000 Form: Spherical beads Particle size (Microtrac® D50): 170 - 265 microns Specific gravity: 1.13 Inherent viscosity b: 0.230-0.255 Acid number: 3.5 Moisture (% max): 0.50 Tukon hardness, knoop no. 8 Tensile strength, psi 2,300 Elongation at break (23°C, 50% RH): 2% Fast dissolving Non-reactive for use in reactive system Low viscosity resin Low molecular weight Clear, translucent or pigmented metal coatings, heat seal lacquers, traffic marking paints, inks, reactive systems to reduce shrinkage and control viscosity.

Elvacite® 75

Medium molecular weight methyl methacraylate copolymer. Elvacite® 75 is compatible with Elvacite® 2008, 2009, 2010, 2013, 2021, 2041, and 2051.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Specific gravity: 1.19 @ 25° C Glass transition temp, onset: 113°C Molecular weight: 100,000 Solid surface seam sealer Improved chemical and abrasion resistance Primary binder Soluble in various solvent systems

Epolene® C-17 Polymer

Epolene® C-17 is a low density polyethylene wax with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17 is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17 has a molecular weight of 100,000 and is provided in pellet form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® C-17P Polymer

Epolene® C-17P is a low density polyethylene wax powder with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17P is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17P has a molecular weight of 100,000 and is provided in powder form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® E-16 Polymer

Low-density oxidized polyethylene having intermediate properties between Epolene® E-14 and Epolene® E-10 with molecular weight of 5,500.

Epolene® E-16 is an oxidized polyethylene wax with low density and low molecular weight. It provides low-color emulsions for use in textiles, polishes, and coatings. Epolene® E-16 has a molecular weight of 5,500 and is supplied in pellet form. Polymer Type: LDPE Molecular Weight: 5,500 Mettler Softening Point: 100°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 700 cP @ 125°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Produces stable emulsions Automotive refinish, Automotive OEM, Pressure sensitive adhesives, wax modification, floor finishes

Epolene® E-43 Polymer

Epolene® E-43 is a maleic anhydride grafted polypropylene with a molecular weight of 9,100

Epolene® E-43 is a medium molecular weight, maleic anhydride modified polypropylene pellet for use in adhesives blends, floor polishes and as a compatibilizer or coupling agent in PP composites. Because of its polarity and anhydride functionality it can be useful in laminating and for enhancing strength of composites that utilize fillers such as glass, talc or metals. It also work as processing aid for engineered polymers. Polymer Type: Ma-PP Molecular Weight: 9,100 Ring and Ball Softening Point: 158°C Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 300 cP @ 190°C Excellent pigment dispersion Low color High durability Imparts slip High gloss Book-binding, caulks and sealants, laminating, floor polish finishes

Epolene® EE-2 Polymer

Epolene® EE-2 is a low molecular weight polyethylene product used in adhesives, wax blends and asphalt modification.

Epolene® EE-2 is a medium density, low molecular weight oxidized polyethylene with excellent hardness. It mixed readily with asphalt making it an excellent modifier. It has a low softening point and low viscosity, which provide hardness, short dry time and gloss. Polymer Type: Ox-PE Molecular Weight: 7,500 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C Excellent pigment dispersion Short dry time High hardness High functionality High gloss Asphalt modification, Pressure sensitive adhesives, wax modification,

Epolene® N-10 Polymer

A polyethylene homopolymer with a viscosity of 1500

N-10 is a polyethylene polymer with a viscosity of 1500 cP that is easily blended with natural or synthetic waxes to enhance properties like tensile strength of wax blends, aid in pigment dispersion, mold release, improve gloss of paper and increase scuff and rub off resistance in printing inks. Polymer Type: Polyethylene Ring and Ball softening Point: 108C Penetration Hardness: 2dmm Viscosity, Brookfield @125C: 1,500 cP Molecular Weigght: 10,000 Increased tensile strength of wax blends Easily blend with natural or synthetic waxes Improve the gloss of paper coatings Aid in pigment dispersion and mold release Improve scuff and rub off resistance in printing inks solvent based adhesives, wax modification, inks, building and construction, packaging

ETHOCEL™ Standard 10 Industrial

ETHOCEL™ Standard 10 Industrial is a thickener for solvent based systems. It is an ethylcellulose with a high purity and provides consistent performance.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 10 Premium

ETHOCEL™ Standard 10 Premium is Pharma compliant and similar to ETHOCEL™ Standard 10 Industrial.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Pharma compliant Organosoluble Thermoplastic Highly compatible with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 100 Industrial

ETHOCEL™ Standard 100 Industrial is a solvent based cellulose ether thickener. It has a ethoxyl content of 49% and yields a viscosity of 100 cP at moderate addition level.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 90.0 - 110.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 20 Industrial

ETHOCEL™ Standard 20 Industrial is a solvent based cellulose thickener with a viscosity of 20 cP.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 20 an ethoxyl content of 49%. Viscosity: 18.0 - 22.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 200 Industrial

ETHOCEL™ Standard 200 Industrial is solvent based thickener. It is a cellulose ether yielding a viscosity of 200 cP at moderate addition level.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 180.0 - 220.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 300 Industrial

ETHOCEL™ Standard 300 Industrial is cellulose ether thickener for solvent based systems. It has the highest viscosity of the ETHOCEL™ range.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 270.0 - 330.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 4 Industrial

ETHOCEL™ Standard 4 Industrial is a cellulose ether thickener for solvent based systems. With 4 cP, it has the lowest viscosity of the ETHOCEL™ range.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 4 has a low viscosity of 4 cP and an ethoxyl content of 49%. Viscosity: 3.0 - 5.5 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 45 Industrial

ETHOCEL™ Standard 45 Industrial is a cellulose ether thickener for solvent based systems. It has a ethoxyl content of 49% and a viscosity of 45 cP.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 45 Premium

ETHOCEL™ Standard 45 Premium is Pharma compliant and has the same properties as ETHOCEL™ Standard 45 Industrial.

ETHOCEL™ Standard 45 Premium is a solvent soluble cellulose ether thickener. It has a ethoxyl content of 49% and a viscosity of 45 cP. ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% wt Max Residue on Ignition: 0.040% wt Max Pharma compliant with USP, NF, EP, JPE, FCC Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 7 Industrial

ETHOCEL™ Standard 7 Industrial is an ethylcellulose polymer with a viscosity of 7 cP and yields an ethoxyl content of 49%.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 7 has a low viscosity of 7 cP and an ethoxyl content of 49%. Viscosity: 6.0 - 8.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

Glacial Acrylic Acid

Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.

Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form

KATHON™ LX 1.5%

preservation of a finished adhesive or coating is desired, a thin film fungicide or mildewcide is needed.

Kathon LX 1.5% is a isothiazolinone-based preservative used to protect polymers, coatings, adhesives and pigments and is an effective and efficient in-can preservative for systems with pH 2-8.5, extending shelf life of a product in its wet state. If long-term...

DuPont Industrial microbicides are a collection of in-can and thin-film preservatives that are appropriate for a multitude of product applications. Physical state: liquid Color: Light blue to light green Odor: Mild, inoffensive odor pH: 2 - 4 Melting point/range: -3.00 °C ( 26.60 °F) Relative Vapor Density (air = 1): 0.6200 Relative Density (water = 1): 1.0200 Formaldehyde free Broad efficacy Low use levels Suited for formulations < pH 8.5 No VOC contribution Adhesives, paints & coatings, agriculture, latex, dispersed pigments, and building materials

LOWILITE® 62

Low melting point HALS that exhibits low interaction with co-additives such as pigments.

LOWILITE® 62 is a Hindered Amine Light Stabilizer (HALS) with a low melting range. Suitable for use in a variety of polymer systems such as polyolefins, styrenics, unsaturated polyesters, acrylics, PVC, and elastomers. It is ideal for systems containing high additive loadings such as multiple stabilizers and pigments. Appearance: Off-white slightly yellow microgranules Softening Point: 55-77 °C Molecular Weight: 3100-4000 g/mol Bulk Density: 570 kg/m³ Broad food-contact approvals Low interaction with co-additives such as pigments and other stabilizers Used in plastisols, adhesives, sealants and spin-finishes. Great for use in high-pigment load applications.

LOWILITE® 92

Liquid form HALS that exhibits low interaction with co-additives such as pigments and other stabilizers.

LOWILITE® 92 is a ultraviolet light stabilizer suitable for use in polyolefins, styrenics, UPE, acrylics, flexible and rigid PVC, elastomers, adhesives, sealants, coatings, and polyols. Appearance: clear, colorless liquid Melting Point: <4 °C Viscosity (@38 °C): 170 mPa · s Density (@38 °C): 0.979 g/cm³ Liquid form Great for use in liquid applications such as coatings and sealants.

LOWILITE® UV B1260

Highly effectively liquid blend of phenolic antioxidant and light stabilizers for protecting polymers from exterior weathering.

LOWILITE® B1260 is a combination of both thermal and ultraviolet stabilizers optimized for protection of polyurethanes exposed to exterior weathering conditions. Appearance: Yellow liquid Pour point: 0 °C Density @ 20 °C: 1.03 Liquid form Blend of phenolic antioxidant and light stabilizers Low viscosity allows for easy pumping and dosing Soluble in all commonly used polyols It is ideal for polyurethanes in integral skin applications, shoe soles, window sealants, and pastes.

LOWINOX® CPL

Low volatility phenolic antioxidant that is especially effective in stabilizing isoprene and butadiene polymers.

LOWINOX® CPL is a non-staining, non-discoloring phenolic antioxidant with low volatility. It is designed to stabilize isoprene and butadiene polymers such as SBR, MBS, and ABS, and is also effective in protecting natural and synthetic rubbers. A high resistance to extraction through boiling or washing makes LOWINOX® CPL an excellent choice for use in carpet backing. Appearance: Cream colored or amber powder or pellets Softening Point: > 105 °C Molecular Weight: 600-700 g/mol Bulk Density: 360 kg/m³ (powder), 600 kg/m³ (pellets) Density @ 20 °C: 1.04 g/cm³ Broad food-contact approvals Non-discoloring Non-staining High resistance to extraction Easily dispersed isoprene, butadiene polymers, natural rubber, synthetic rubber, latex, SBR, ABS, ASA, MBS, SBS, SIS, CR, NBR, BR, tackifiers, adhesives and sealants; rubber threads and latex for carpet backing and foams,

Lupasol® FG

Multi-functional cationic polyethylenimine with a branched polymer structure.

Lupasol® FG is a clear, colorless cationic polyethylenimine with a branched polymer structure. Average molar mass: 800 Viscosity @ 20°C: 5000 Concentration: 99% Adhesives, complexing, coatings and paints, pigment manufacture, and protein immobilization.

METHOCEL™ A15C

Methocel™ A15C is a methylcellulose thickener. It performs many functions simultaneously including thickening, binding, water retention and film forming. The A15C grade has a viscosity range from 1,200 to 1,800 cP.

Methocel™ A15C is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier and functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Sodium Chloride: max 1.5% Viscosity, 2% in water, @20°C, calculated: 1200 - 1800 cP Forms a firm gel texture Reversible hot water gelation

METHOCEL™ A15LV

Methocel™ A15LV is a low viscosity methylcellulose. With a viscosity from 12 to 18 cP, it is one of the lowest in the Methocel product range. It functions as a rheology modifier in coatings and adhesives.

Methocel™ A15LV is a low viscosity water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, while various properties are simultaneously present and interact in combination. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A15LV Premium

METHOCEL™ A15LV Premium has the same performance properties as METHOCEL™ A15LV, except this premium product has less impurities. It can be used in pharmaceutical applications.

METHOCEL™ A15LV Premium is a water-soluble polymer derived from cellulose with a very low viscosity. Methocel is a high purity, non-ionic cellulose ether. Besides thickening, binding, Methocel functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, due to the fact that various properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5.0% Max Residue on ignition: 1.5% Max Ash sulphated: 1.5% Max Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Pharmaceutical grade USP/EP/JP compliant Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A4C

METHOCEL™ A4C is a low viscosity methylcellulose thickener. It yields a viscosity of 400 cP at low addition levels.

Methocel™ A4C is a water-soluble, high purity, non-ionic cellulose ether, and performs as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.50% Sodium Chloride: max 2.0% Viscosity, 2% in water, @20°C, calculated: 350 - 550 cP Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible

METHOCEL™ A4C Premium

METHOCEL™ A4C Premium has the same performance as METHOCEL™ A4C, except this premium product is pharmaceutical compliant.

Methocel™ A4C Premium is a water-soluble, high purity, non-ionic cellulose ether. It has a low viscosity range of 320 to 480 cps. Methocel is used as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5% Max Residue on ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Viscosity, 2% in water, @20degC, calculated: 320 - 480 cP Pharmaceutical grade Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible USP/EP/JP compliant

METHOCEL™ A4M

METHOCEL™ A4M is a methylcellulose and yields a viscosity of 4,000 cP. It is used as thickener, binder, film former, and water-retention agent.

METHOCEL™ A4M is a water-soluble methylcellulose. Methocel products also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 3,500 - 5,600 cP Yields optimum performance at a lower concentration Water soluble No ionic charge pH stable Thermal gelation which is reversible

METHOCEL™ A4M Premium

METHOCEL™ A4M Premium is a pharmaceutical grade methylcellulose with the same performance properties as METHOCEL™ A4M.

METHOCEL™ A4M Premium is a water-soluble methylcellulose. It yields a viscosity of 4,000 cps. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Viscosity, 2% in water @20°C: 2,663 - 4970 cP Loss on drying: 5% Max Residue on ignition: 1.5% Max Ash, sulphated: 1.5% Max Pharmaceutical grade USP/EP/JP compliant Yielding optimum performance at a lower concentration. Can be added directly to aqueous systems Non- ionic pH stable Thermal gelation which is reversible

METHOCEL™ E15 Industrial LV

METHOCEL™ E15 Industrial LV is an HPMC with a low viscosity of 15 cP. Solutions of this grade can be made at 10% to 15% concentration.

METHOCEL™ E15LV is water-soluble and non-ionic cellulose ether. It is often used as a thickener or binder. Methocel has various other functions which are often simultaneously present in the formulation resulting in economical advantages. It can perform as suspending aid, stabilizers, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 28 - 30% Viscosity, 2% in Water, @ 20degC: 12 - 18 cP Hydroxypropoxyl: 7.0 - 12.0% Forms a semi firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ E5 Premium LV

METHOCEL™ E5 Premium LV is a Hydroxypropyl Methylcellulose (HPMC) thickener which yields a very low viscosity of 5 cP. It is a pharmaceutical grade.

METHOCEL™ E5 Premium LV is a water-soluble polymer derived from cellulose. This pharmaceutical grade can be used in Industrial applications. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 4.0 - 6.0 cP Methoxyl: 28.0 - 30.0% Hydroxypropoxyl: 7.0 - 12.0% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras This grade can be used in Industrial applications.

METHOCEL™ J12MS

METHOCEL™ J12MS is a surface treated HPMC resulting in delayed viscosity build up to 12,000 cPs. It has one of the highest substitution levels.

METHOCEL™ J12MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydropropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 10,000 - 16,500 cPs

METHOCEL™ J75MS

METHOCEL™ J75MS is a Hydroxypropyl Methylcellulose (HPMC) thickener with very high substitution. Is has a viscosity range from 60,000 to 75,000 cPs at low addition levels. This grade is surface treated with a slow viscosity build up.

METHOCEL™ J75MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydroxypropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 60,000 - 90,000 cP Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K100LV

METHOCEL™ K100LV is a hydroxypropyl methylcellulose (HPMC) thickener with low substitution. It has a low viscosity of 100 cP at low addition levels.

METHOCEL™ K100LV is a low viscosity methylcellulose polymer. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 80 - 120 cP Moisture, as packaged: 3.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K15M

METHOCEL™ K15M is a HPMC thickener with low substitution. It yields a viscosity of 15,000 cP and forms a soft gel texture. This Methocel has the highest gelation temperature of 70°C-90°C (158°F-194°F).

METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K15M Food Grade

METHOCEL™ K15M Food Grade is the same as K15M, but is compliant with international Food standards.

METHOCEL™ K15M Food grade is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 11,250 - 21,000 cPs Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Can be used in Industrial applications.

METHOCEL™ K15MS

METHOCEL™ K15MS is similar to K15M, except it is surface treated for a retarded dissolution.

METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Delayed dissolution Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K4M

METHOCEL™ K4M ia a hydroxypropyl ethylcellulose (HPMC) thickener with a low substitution. It has a viscosity of 4,000 cP at low addition levels.

METHOCEL™ K4M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 12,000 - 21,000 cP Sodium Chloride: 2.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

NPG Platelets

Provides excellent weathering and fluidization characteristics.

Eastman NPG™ platelets is a glycol commonly used for high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It can be used as the sole glycol component or used in conjunction with other modifiers to achieve your desired properties. It can be used for food contact coatings in the United States under feral food additive regulations. Appearance: White platelets Molecular weight: 104.15 Crystallization point: 31°C (88°F) Melting point: 124-130°C (255-266°F) Boiling point: 210°C (410°F) Flash point: 132°C (270°F) Specific gravity @ 20°C/20°C: 1.06 CAS: 126-30-7 Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.

POLYOX™ WSR 1105

POLYOX™ WSR 1105 is a polyethylene oxide thickener. It is a water-soluble resin with a viscosity of 8,800 to 17,600 cP.

POLYOX™ WSR 1105 has a molecular weight of 900,000 and has the highest viscosity in the POLYOX range. It is widely used as binder, lubricant, thickener and water retention aid. It forms flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 8800- 17600 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity

POLYOX™ WSR 205

POLYOX™ WSR 205 is a water-soluble thickener with a molecular weight 600,000. The viscosity ranges from 4,500 to 8,800 cP.

POLYOX™ WSR 205 is a polyethylene oxide with a viscosity of 4500 - 8800 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 6800 - 8800 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301

POLYOX™ WSR 301 is a water-soluble resin with a high molecular weight of 4,000,000.

POLYOX™ WSR 301 is a polyethylene oxide (PEO) with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper, adhesives, building and construction. In Concrete, It works as a flow aid in pumped, lightweight, spray and underwater concrete. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% High binding efficiency Crosslinkable Viscoelastic Flow and pumpability aid Lubrication aid Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301 Fine Powder NF

POLYOX™ WSR 301 Fine Powder NF has same characteristic as POLYOX™ WSR 301, except this grade is pharma compliant.

POLYOX™ WSR 301 is a polyethylene oxide with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% National Formulary Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 303

POLYOX™ WSR 303 has a molecular weight 7,000,000 and the viscosity ranges from 7,500 to 10,000 cP.

POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 7500 - 10000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 308

POLYOX™ WSR 308 is a polyethylene oxide thickener. It has a high molecular weight of 8,000,000 and a viscosity range of 10,000 to 15,000.

POLYOX™ is a water-soluble resin and used as binder, lubricant, thickener and water retention aid in various applications. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. POLYOX™ WSR 308 has the highest molecular weight of the POLYOX range. Viscosity: 10000 - 15000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic Available in 140 lb and 960 lb drums

POLYOX™ WSR Coagulant

POLYOX™ WSR Coagulant is a PEO thickener with a molecular weight of 5,000,000.

POLYOX™ WSR Coagulant is a water-soluble polymer with a viscosity range from 5500 to 7500 cP. POLYOX is widely used as binder, lubricant, thickener and water retention aid. Viscosity: 5500 - 7500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N10

POLYOX™ WSR N10 is a polyethylene oxide and water soluble thickener. It has a molecular weight of 100,000 and yields a viscosity of 12 to 50 at moderate addition levels.

POLYOX™ are water-soluble resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 has the lowest molecular weight of the POLYOX™ range and used where lower viscosity is required. It is a recommended grade for seed coatings. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N10 100 Mesh

POLYOX™ WSR N10 100 Mesh has the same properties than POLYOX™ WSR N10 100, except this has finer particles.

POLYOX are water-soluble polyethylene oxide resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 mesh has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. This mesh grade has a smaller particle size. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N12K

POLYOX™ WSR N12K is a water-soluble polymer and has a molecular weight of 1,000,000. It yields a viscosity of 400 to 800 cP at 2% addition level.

POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N12K has a relative low viscosity of 400-800 cP. Viscosity: 400 - 800 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000

POLYOX™ WSR N3000 is a water-soluble resin with a relative high molecular weight of 400,000. It yields a viscosity of 2,250 to 4,500 at moderate addition levels.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000 LS

POLYOX™ WSR N3000 LS has the same characteristics as POLYOX™ WSR N3000, except LS version has a low silicon dioxide level of less than 1.5WT%.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.0 - 1.5 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N60K

POLYOX™ WSR N60K is a PEO polymer with a molecular weight of 2,000,000.

POLYOX™ WSR 60K is a polyethylene oxide with a viscosity of 2000 - 4000 cP in a 2% aqueous solution. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2000 - 4000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N750

POLYOX™ WSR N750 is a water-soluble thickener with a molecular weight of 300,000. It has a viscosity range of 600 to 1,200 in a 5% solution.

POLYOX™ WSR N750 is widely used as seed coatings, wet-tack in paper adhesives, thickener in industrial cleaning products and coatings and paint removers for building and construction. In fluorescent lamp phosphors the N750 is used as binder. POLYOX™ is a polyethylene oxide thickener and water-soluble. Is functions as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Viscosity: 600 - 1,200 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N80

POLYOX™ WSR N80 is a water-soluble PEO thickener with a molecular weight of 200,000. It has a low viscosity of 65 to 115 cP.

POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N80 is one of the lower molecular weight grades of the POLYOX™ range. Viscosity: 65 - 115 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

Sodium PYRION™ 40%

Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

TBAA (Dimethylethyl Oxobutanoate)

Reagent used in coatings utilizing polyesters, acrylics, cellulosics, and epoxies.

Eastman™ TBAA (T-Butyl-Acetoacetate) provides room temperature cure and isocyanate-free crosslinking in many coating applications. It can also be used as a reagent in pharmaceuitical, agrichemical, and pigment applications. Appearance: Liquid Molecular weight: 158.20 Flash point: 66°C (151°F) Boiling point: 190°C (374°F) Specific gravity @ 20°C/20°C: 0.954 CAS: 1694-31-1 Increased adhesion to metal substrates Low glass transition resulting in increased coating flexibility Reacts with conventional crosslinkers Reduces viscosity in resins to meet lower VOC emissions Used in adhesives, sealants, architectural coatings, paints, coatings, and intermediate manufacturing in pharmaceuiticals and agriculture.

Trilene® 65

Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.

Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Trilene® 67

Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 9.5% diene content for use in rubber, coatings and adhesives.

Trilene® 67 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 67 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 67 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 46/54 Degree of Unsaturation (% Diene): 9.5% Type of Diene: ENB Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 39,000 Brookfield Viscosity (cP, RVT #7 at 60°: 900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 128,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Trilene® 77

Low molecular weight Ethylene Propylene (EPDM) terpolymer with 10.5% diene content for use in rubber, coatings and adhesives.

Trilene® 77 is a crystalline waxy EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 77 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 77 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Trilene® 77 is easier to handle during mixing compared to Trilene® 65 and 67 since it is a solid at room temperature. Ethylene/Propylene: 74/26 Degree of Unsaturation (% Diene): 10.5% Type of Diene: ENB Color: Pale Yellow, Waxy solid Specific Gravity: 0.86 Molecular Weight by GPC (Da): 27,000 Brookfield Viscosity (cP, RVT #7 at 60°: 800,000 Brookfield Viscosity (cP, RVT #7 at 100°: 102,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process East to weigh before mixing Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Tyzor® OGT, octyleneglycol titanate

A reactive organic alkoxy titanate with 100% active content less sensitive to moisture than Tyzor TPT and TnBT

Similar to Tyzor BTP TiO2 Content: 12.7% Active Content: 100 % Color: Colorless to Yellow Density (20C): 1.03 g/mL Viscosity (20C): 3500 mPa*s Pour Point: -55C Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Similar to Tyzor BTP It can also act as a binder itself, used as an additive in sealants to crosslink -OH or -COOH functional polymers, binders or promote adhesion.

Tyzor® PITA SM

Tyzor™ PITA SM is a mixture of titanium ethyl acetoacetate complex with 100% active content and methyl-trimethoxy silane.

Tyzor PITA-SM is designed as a curing agent for silicone based sealants and adhesives. Its high reactivity at low temperatures enables it to react with common functional groups such as R-OH, M-OH, SiOH, or R-COOH to effect cure rate, crosslinking and adhesion promotion. TiO2 Content: ca. 15.2% Active Content: ca. 80% Color: Yellow to Orange Density (20 C): ca. 1.08 g/ml Viscosity (20 C): ca. 8 mPa*s Pour Point: < -10 C Boiling Point: ca. 102 C (Solvent) Flash Point: ca. 32 C Solubility in Solvents: Miscible in most organic solvents Solubility in water: Decomposes Tyzor PITA-SM in silicone sealants and adhesives promotes adhesion, crosslinks silanes, increases cure rate and acts as a drying agent. It can also provide these benefits when used with silanol end-capped polymers such as polypropylene oxides, acrylates, or polyurethanes. They can also be used as additives in paints to cross-link functional polymers or binders, act as binders or promote adhesion.

WALOCEL™ CRT 100 GA

WALOCEL™ CRT 100 GA is a carboxymethyl cellulose (CMC) in granular form with a low viscosity of 100 cP. It provides a crystal clear solution free of fibers.

WALOCEL™ CRT 100 GA is a low viscosity CMC. This granular grade can be added directly to water, and has a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 110 - 160 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Improving stickiness in water-based adhesives. In batteries used as binder for anode components. Offers stability during ceramic forming and in the oven.

WALOCEL™ CRT 100 PA

WALOCEL™ CRT 100 PA is similar to CRT 100 GA, except this is a powder grade. It can be blended with other dry ingredients prior to addition to water.

WALOCEL™ CRT 100 PA is a low viscosity CMC. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 110 - 160 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature Provides a clear solution High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Improving stickiness in water-based adhesives. In batteries used as binder for anode components. Offers stability during ceramic forming and in the oven.

WALOCEL™ CRT 1000 GA

WALOCEL™ CRT 1000 GA is a granular CMC with a viscosity of 1,000 cP.

WALOCEL™ CRT 1000 GA is a low viscosity CMC. This granular grade has a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. It provides a clear solution. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 550 - 800 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films Recommended grade in paper and ceramic applications.

WALOCEL™ CRT 1000 PA 07

WALOCEL™ CRT 1000 PA 07 has similar properties than CRT 1000 GA, except this is a powder grade.

WALOCEL™ CRT 1000 PA 07 is a low viscosity CMC with a substitution degree of 0.7. This powder grade can be blended with other ingredients before dissolving in water. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Walocel with low viscosity grades provide clear solutions. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 300- 600 cP Substitution degree: 0.65 — 0.80 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 2000 PA

WALOCEL™ CRT 2000 PA is a carboxymethyl cellulose (CMC) powder with a viscosity of 2,000 cP.

WALOCEL™ CRT 2000 PA is a CMC in powder form. This low viscosity powder grade provides a clear solution. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 1900 - 2800 cP Substitution degree: 0.82 — 0.95 pH Value, 1% aqueous solution 6.5 — 8.5 Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 20000 GA

WALOCEL™ CRT 20000 GA is a granular carboxymethyl cellulose (CMC) with a viscosity of 20,000 cP.

WALOCEL™ CRT 20,000 GA is a granular CMC grade with a slow agitation. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. It provides a clear solution. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 1,900 - 2,600 cP Substitution, degree of 0.75 — 0.85 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 30 PA

WALOCEL™ CRT 30 PA has the lowest viscosity of the WALOCEL™ product range. It yields a viscosity of 30 cP.

WALOCEL™ CRT 30 PA is a powder which can be blended with other solid ingredients prior to the addition of water. It is a thickener and binder, has excellent water-binding and film-forming properties in adhesives, batteries and ceramics. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 1% aqueous solution (dry basis), 25°C: 25 - 30 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 30000 GA

WALOCEL™ CRT 30000 GA is a granular carboxymethyl cellulose (CMC) with a high viscosity of 30,000 cps at 2% concentration.

WALOCEL™ CRT 30000 GA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 3,000 - 4,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 40000 GA

WALOCEL™ CRT 40000 GA is a high viscosity granular CMC of 40,000 in a 2% aqueous solution.

WALOCEL™ CRT 40000 GA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 4,000 - 5,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 40000 PA

WALOCEL™ CRT 40000 PA is similar to CRT 40000 GA, except this is a powder grade.

WALOCEL™ CRT 40000 PA is high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. This Powder grade can be blended with other dry ingredients prior to addition to water. Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 4,000 - 5,000 cP Substitution, degree of 0.82 — 0.95 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films

WALOCEL™ CRT 60000 GA

WALOCEL™ CRT 60000 GA is a granular carboxymethyl cellulose (CMC). With 60,000 cP it has the highest viscosity of all WALOCEL™ products.

WALOCEL™ CRT 60000 GA is high viscosity binder and thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 0.5% aqueous solution (dry basis), 25°C: 1,100 - 2,000 cP Substitution, degree of 0.7 — 0.8 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

WALOCEL™ CRT 60000 PPA 07

WALOCEL™ CRT 60000 PPA 07 has the same properties as CRT 60000 GA, except it is a powder grade which can be blended with other ingredient prior to the addition to water.

WALOCEL™ CRT 30000 PPA 7 is a high viscosity thickener. Walocel is used as binder, thickener, gelling agent, stabilizer, emulsifier, crystallization inhibitor, protective colloid, film former, plasticizer and provide green strength. Viscosity, Brookfield, LVT, SP.3, 30 RPM, 0.5% aqueous solution (dry basis), 25°C: 1,100 - 2,000 cP Substitution, degree of 0.7 — 0.8 pH Value, 1% aqueous solution: 6.5 — 8.5 Total salt content, dry basis 0.50 Max Anionic Water soluble at any temperature High surface tension, less foam formation Excellent viscosifier; reversible viscosity decrease upon heating Stable in a wide pH-range (pH 3.5 – 12) Compatible with nearly all other hydrocolloids No odor and no taste Forming fat, oil and organic solvent resistant films The non-toxicity of Walocel™ CRT makes it an ideal polymer to formulate gels.

Zinc PYRION™ Powder

Powdered dry-film preservative (zinc pyrithione) that provides antimicrobial protection in a wide variety of industrial applications.

Zinc Pyrion is a Zinc Pyrithione based preservative for protection against unwanted microbial growth and degradation. The powdered dry-film preservative can be used in a wide range of both indoor & outdoor applications that are susceptible to microbial attack. Typical Properties; Appearance: Light beige to beige powder Purity (Potentiometric Titration): Min. 97.0 wt.% Loss on Drying (105°C): Max. 2 wt.% Particle Size Distribution: D50: max. 10 μm; D99: max. 35 μm Relative Density: 1.8106 at 22.5°C Bulk Density: 0.41 g/ml pH: 6.5 - 8.5 (5% dispersion in water) Vapor Pressure: < 6.6 x 10-4 Pa at 25°C Solubility in Water: 4.93 mg/l at 20.0°C; 6.11 mg/l at 30.0°C Exceptional control against microbial growth Cost effective powder form Full control of formulated treat rate Free testing available to measure efficacy of anti-microbial protection Typical treat rate will vary by application, but it is recommended to test several levels (2000, 3000, 4000, 5000 ppm) to test efficacy of protection. Testing is available via Janssen's laboratory for several industry standard tests.