Chemours Glycolic Acid Technical Grade, 70% Solution is the only domestically produced hydroxyacetic acid. Chemours Glycolic Acid Technical Grade, 70% is the standard technical grade used across varied industries.
Chemours Glycolic Acid is the smallest alpha hydroxycarboxylic acid. Glycolic Acid has dual functional groups of OH and the COOH. These groups result in Chemours Glycolic Acid being an effective low pH acid while also functioning as an excellent de-scaling and chelating agent. These dual functionality groups coupled with the small molecular size of Chemours Glycolic Acid allows for high penetration and efficacy across industries and applications. In addition, Chemours Glycolic Acid is preferred to other strong mineral and organic acids due to Chemours Glycolic Acid's environmental profile. Total acid , as Glycolic (% wt) 71 ± 1 Formic acid (% wt) <1 Sulfates, as SO4 (ppm) ≤800 Color, Gardner ≤3 Turbidity (ntu) ≤6 Filterable Solids None Appearance: A clear, light amber liquid with a mild odor resembling burnt sugar that is visibly free of suspended matter NSF 60 certified (only source) Domestically produced (only source in North America) Chloride free (non-MCA production method) Readily biodegradeable, 90% in 7 days No VOC Negligible odor Less corrosive than other mineral and organic acids (collateral available) Excellent salt solubility Fully water soluble USDA approved for non-food contact Chemours Glycolic Acid Technical Grade, 70% is widely used accross varied industries, such as; oil and gas, HIC, building and construction, coating and inks, metal surface treatment, electronics manufacturing, polymer manufacturing, dairy processing, and more.
Degressal® SD-20 is a silicone-free foam suppressor for detergents and cleaners and are also particularly suitable for applications in which silicone is undesirable.
Degressal SD 20 can be used in liquid detergents, either acid or alkaline, which contain cationic surfactants. Concentration: ca. 100% Density: ca. 0.96 g/cm3 Viscosity: ca. 60 Setting Point: ca. -50°C Acid Number: ca. 0 mg KOH/g Degressal SD 20 has the advantage that it nearly always forms a clear solution in concentrates before and after dilution. Acid cleaners, Alkaline cleaners, Liquid cleaners, Powder cleaners, Laundry detergent, Wax emulsion
and gas production, and denture cleaning.
Oxone™ PS-16 known as KPMS or potassium peroxymonosulfate. Oxone™ is a white granular product that provides non-chlorinated oxidation in a wide variety of applications such as: industrial processing, pulp and paper production, waste water treatment, industrial and household cleaning, oil...
Oxone™ PS-16 made by Lanxess provides a green method for industrial and consumer oxidation needs. Oxone™ PS-16 is a non-chlorinated solution to oxidation needs and is highly stable and easy to use in solution. Triple salt molecular weight: 614.7 Active oxygen min: 4.5% Active oxygen typical analysis: 4.7% Active oxygen theoretical: 5.2% Active component: KHSO5 KHSO5 min: 42.8% KHSO5 typical: 44.7 pH, at 25°C of 1% solution: 2.3 pH, at 25°C of 3% solution: 2.0 Non-chlorinate oxidizer in free flowing solid form. High water solubility at ambient temperatures. Solution stability (even under acidic conditions). Low toxicity when compared to chlorinated. options and other oxidizers. No oxidizer label required. Highly predictable etch rate for production of micro electronics. Pool & Spa shock treatment Printed circuit board microetchant Repulping aid for wet-strength resin destruction Oxidizing agent for Felt Wash Odor control agent in wastewater treatment Cyanide destruction in mining Bleach functionality for denture cleanser, textiles, and cleaning applications Active ingredient for disinfection applications