Aristonate® S-4000

Low molecular weight (400) synthetic sodium sulfonate for use in in formulating soluble & semi-synthetic oils requiring microemulsions.

Aristonate® S-4000 is a first-intent sodium sulfonate designed for us in formulating a variety of industrial oils & lubricants. Appearance at 25C: Viscous Dark Amber Liquid Odor: Slight Active (Wt.%): 60.0 min Sodium Sulfate (Wt.%): 0.75 max Water (Wt.%): 1.0 max % Volatile by Volume: <1.0 Equivalent Weight: 400 pH (10% solution): 10.0 Solubility in Water: Dispersible Excellent consistency from 1st intent proprietary production method Easily forms microemulsions for semi-synthetic fluids Excellent corrosion protection Low foam profile Good ancillary lubricity

Aristonate® S-4600

Medium-to-high molecular weight (460) synthetic sodium sulfonate for use in formulating soluble & semi-synthetic oils.

Aristonate® S-4600 is a first-intent sodium sulfonate designed for us in formulating a variety of industrial oils & lubricants. Appearance at 25C: Clear Amber Liquid Odor: Slight Active (Wt.%): 60.0 min Sodium Sulfate (Wt.%): 0.75 max Water (Wt.%): 2.0 max % Volatile by Volume: 1.0 Equivalent Weight: 460 pH (10% solution): 10.0 Solubility in Water: Dispersible Excellent consistency from 1st intent proprietary production method Excellent corrosion protection Low foam profile Excellent emulsification & dispersion Good ancillary lubricity Soluble Oils Aristonate® S-4600 can be formulated into a low foaming soluble oil without the use of antifoams or defoamers when combined with an Oleic Acid. Oils formulated in this manner provide excellent corrosion inhibition on ferrous metals. Semi-Synthetics Aristonate® S-4600 offers heightened levels of corrosion protection performance in semi-synthetic formulations.

BHT

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including crystalline.

Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

CALESTER™ 600

Polyol ester base stock mostly used in applications where low viscosity and broad temperature ranges are required. Viscosity of 23 cSt @ 40°C.

CALESTER™ 600 is a low viscosity polyol ester base stock derived from pentaerythritol and saturated fatty acids resulting in a very stable product. This Group V base oil provides many performance advantages such as excellent lubricity compared to traditional base oils. Viscosity @ 100°C: 4.6 Viscosity @ 40°C: 23 Viscosity @ -40°C: 8,500 Viscosity Index: 116 Pour Point, °C: -65 Flash Point, °C: 241 Water Content, wt%: 0.02 Biodegradability rating: 90% High oxidative stability Low volatility Very low pour point Readily biodegradable Used in many applications such as refrigeration lubricants, turbine oils, air compressor oils, hydraulic fluids, and greases. CALESTER™ 600 can also be used as a correction fluid for base oils such as PAO and GTL.

CALESTER™ A

Polyol ester base stock with similar attributes to CALESTER™ 600. Viscosity of 20 cSt @ 40°C.

CALESTER™ A is a low viscosity polyol ester base stock derived from pentaerythritol and saturated fatty acids resulting in a very stable product. This Group V base oil provides many performance advantages such as excellent lubricity compared to traditional base oils. Viscosity @ 100°C: 4.3 Viscosity @ 40°C: 20 Viscosity @ -40°C: 4,400 Viscosity Index: 123 Pour Point, °C: -65 Flash Point, °C: 243 Water Content, wt%: 0.02 Biodegradability rating: 81% High oxidative stability Low volatility Very low pour point Readily biodegradable Miscibility with HFC Refrigerants Used in many applications such as refrigeration lubricants, turbine oils, air compressor oils, hydraulic fluids, and greases. CALESTER™ A can also be used as a correction fluid for base oils such as PAO and GTL.

CALESTER™ DB2

Polyol ester base stock mostly used in applications where lower viscosity and broad temperature ranges are required. Viscosity of 25 cSt @ 40°C.

CALESTER™ DB2 is an ISO 25 pure polyol ester derived from pentaerythritol and saturated fatty acids resulting in maximum stability. This base stock is suitable for a broad range of lubricant applications due to its wide range of operating temperature capabilities. Viscosity @ 100°C: 5.0 Viscosity @ 40°C: 25 Viscosity @ -40°C: 8,335 Viscosity Index: 135 Pour Point, °C: -60 Flash Point, °C: 248 Water Content, wt%: 0.03 High oxidative stability High viscosity index High flash point Low volatility Low pour point Readily biodegradable

CALESTER™ F

Polyol ester base stock mostly used in applications where high viscosity and broad temperature ranges are required. Viscosity of 52 cSt @ 40°C.

CALESTER™ F is a high viscosity polyol ester base stock derived from dipentaerythritol and saturated fatty acids resulting in maximum stability. This Group V base oil provides many performance advantages such as excellent lubricity compared to traditional base oils. Viscosity @ 100°C: 8.8 Viscosity @ 40°C: 52 Viscosity @ -40°C: 37,000 Viscosity Index: 148 Pour Point, °C: -60 Flash Point, °C: 283 Water Content, wt%: 0.02 Biodegradability rating: 67% Broad temperature range High viscosity index Low volatility Low pour point Phthalate free Readily biodegradable Used mostly in turbine oils, greases, gear oils, and refrigeration lubricants

CALESTER™ HV

Polyol ester base stock mostly used in applications where high viscosity and broad temperature ranges are required. Viscosity of 390 cSt @ 40°C.

CALESTER™ HV is a high viscosity polyol ester base stock. This Group V base oil provides many performance advantages such as excellent lubricity compared to traditional base oils. Viscosity @ 100°C: 26 Viscosity @ 40°C: 390 Viscosity Index: 89 Pour Point, °C: -18 Flash Point, °C: 290 Water Content, wt%: 0.02 Very high viscosity High stability Low coking Low volatility Used in oven chain, refrigeration, high temperature greases and other industrial lubricant applications.

CALESTER™ J

Polyol ester base stock used mostly in applications where medium viscosity is desired with high biodegradable properties. Viscosity of 25 cSt @ 40°C.

CALESTER™ J is a medium level viscosity polyol ester that is highly stable in formulations. Derived from pentaerythritol and linear saturated fatty acids that come from renewable resources results in a very high biodegradable rating, which is ideal when formulating green lubricants. Viscosity @ 100°C: 4.9 Viscosity @ 40°C: 25 Viscosity @ -40°C: 6,900 Viscosity Index: 138 Pour Point, °C: -63 Flash Point, °C: 258 Water Content, wt%: 0.02 Biodegradability rating: 91% Broad temperature range High lubricity Low pour point Low volatility Global registrations Readily biodegradable Miscibility with HFC Refrigerants Used in various applications such as aviation turbine oils, engine oils, air compressor oils, refrigeration lubricants, hydraulic fluids, and greases.

CALESTER™ N

Polyol ester base stock used in applications where lower viscosity is desired with a wide range of temperature capabilities. Viscosity of 8 cSt @ 40°C.

CALESTER™ N is an ISO 8 pure polyol ester derived from neopentylglycol and saturated fatty acids resulting in maximum stability. This base stock is suitable for a broad range of lubricant applications due to its wide range operating temperature capabilities. Viscosity @ 100°C: 4.9 Viscosity @ 40°C: 8.2 Viscosity @ -40°C: 670 Viscosity Index: 127 Pour Point, °C: -51 Flash Point, °C: 210 Water Content, wt%: 0.02 Biodegradability rating: >60% High oxidative stability High viscosity index High flash point Low volatility Low pour point Readily biodegradable Miscibility with HFC Refrigerants Used in many applications such as refrigeration lubricants, greases, gear oils, engine oils, air compressor oils, hydraulic fluids, and chain lubricants.

CALESTER™ T

Food grade polyol ester base stock suitable for applications where lower viscosity is desired with a wide range of temperature capabilities. Viscosity of 22 cSt @ 40°C.

CALESTER™ T is an ISO 22 polyol ester derived from trimethylolpropane and saturated fatty acids resulting in high stability. This base stock is suitable for use in the food manufacturing industry due to its broad temperature range, biodegradability, and renewable resources. Viscosity @ 100°C: 4.4 Viscosity @ 40°C: 22 Viscosity @ -40°C: 4,100 Viscosity Index: 133 Pour Point, °C: -55 Flash Point, °C: 255 Water Content, wt%: 0.02 Biodegradability rating: 86% NSF registered as HX-1 High oxidative stability High viscosity index Low volatility Low pour point Readily biodegradable Renewable resource Used in many applications such as automotive engine oils, environmental lubricants, air compressor oils, transmission fluids, turbine oils, hydraulic fluids, and greases. CALESTER™ T can also be used as a correction fluid for base oils such as PAO and GTL.

CALESTER™ TS

Polyol ester base stock suitable for applications where lower viscosity is desired with a wide range of temperature capabilities. Viscosity of 17 cSt @ 40°C.

CALESTER™ TS is an ISO 17 pure polyol ester derived from trimethylolpropane and saturated fatty acids resulting in maximum stability. This base stock is suitable for a broad range of lubricant applications due to its wide range of operating temperature capabilities. Viscosity @ 100°C: 4.0 Viscosity @ 40°C: 17 Viscosity @ -40°C: 3,300 Viscosity Index: 133 Pour Point, °C: -64 Flash Point, °C: 249 Water Content, wt%: 0.02 Biodegradability rating: >60% High oxidative stability High viscosity index High flash point Low volatility Low pour point Readily biodegradable Used in turbine oils, gear oils, engine oils, air compressor oils, and hydraulic fluids.

Cyclopentane 95 Tech

A technical grade, high-density, high-purity hydrocarbon that is suitable for use in fuels and fuel additives as well as in plasticizers and coatings.

Color: <5 Density: 748 Distillation Range: 48-50 Evaporation Rate: 1.4 Refractive Index: 1.405 Aniline Point: 18 Aromatic Content: <0.001 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 34.6 Kinetic Viscosity: 0.59

Dimethyl Sulfide

Dimethyl Sulfide also known as DMS is a presulfiding agent for steam cracking which turns hydrocarbons into ethylene and propylene used for olefin-based products

DMS is used to reduce coke and carbon monoxide formation during high temperature thermal cracking of hydrocarbons in the tubular reactors Dimethyl Sulfide : 99.5 Vapor Pressure @ 100.4 F, PSI : 14.9 Specific Gravity 60/60 : 0.854 Density @ 60 F : 7.11 Flash Point (Deg. F), Estimated : < 0 Freezing Point, Deg F (Literature) : -145 Sulfur : 51.64 Half Doctor Test : Pass Viscosity @ 68 F, cP : 0.285 Distillation - DP : 99 Distillation - IBP : 97

HiTEC® 11100

Passenger car motor oil additive engineered to meet GF-5 and API SN industry specifications and can be formulated to exceed GM dexos1 requirements.

HiTEC® 11100 is engineered to formulate a PCMO that meets all ILSAC and non-ILSAC viscosity grades in a wide variety of base oils when used with the HiTEC® 5751 OCP VI. Appearance: Dark brown viscous liquid Specific Gravity @ 15.6/15.6°C: 0.971 Density, lb/gal.: 8.09 Viscosity @ 100°C, cSt: 89 TBN, mgKOH/g: 78 Flash Point, °C (PMCC): 135 min. Max Handling Temp: 70°C Shelf Life: 3 months @ 50°C, 36 months @ ambient (10-40°C) Robust technology that exceeds the demands of the new ILSAC GF-5 specification Covers both API SN and API SN Resource Conserving license requirements Approved against GM dexos1® specification with no additive modifications, boost or changes in treat rate Starter formulations are available for a variety of base stocks.

HiTEC® 11104

Passenger car motor oil additive to meet requirements of GMW16073.

HiTEC® 11104 is a PCMO additive similar to the HiTEC® 11100 performance, but also meets requirements set by GMW16073. Appearance: Dark red-brown viscous liquid Density, lb/gal.: 7.75 Specific Gravity @ 15.6/15.6°C: 0.930 Viscosity @ 100°C, cSt: 39 Flash Point, °C (PMCC): 110 min. Nitrogen, %M: 2.20 Phosphorus, ppm: 200 max Zinc, ppm: 200 max Max Handling Temp: 70°C Shelf Life: 6 months @ 50°C, 12 months @ ambient (10-40°C) Robust technology that exceeds the demands of the new ILSAC GF-5 specification Covers both API SN and API SN Resource Conserving license requirements Approved against GM dexos1® specification with no additive modifications, boost or changes in treat rate Starter formulations are available for a variety of base stocks.

HiTEC® 11145

Passenger car motor oil additive package to meet ILSAC GF-5/API SN claims.

HiTEC® 11145 is a Passenger Car Motor Oil (PCMO) DI additive to formulate fluids that exceed performance requirements of; ILSAC GF-5 API SN. HiTEC® 1145 also enhances performance in the latest TGDI engines that require motor oil to withstand increasingly severe engine environments. Appearance: Dark brown viscous liquid Specific Gravity @ 15.6/15.6°C: 0.973 Density, lb/gal: 8.10 Viscosity @ 100°C, cSt: 83 TBN mgKOH/g: 86 Flash Point, °C (PMCC): 135 min. Max Handling Temp: 70°C Shelf Life: 3 months @ 50°C, 36 months @ ambient (10-40°C) Fully meets license and approval requirements of ILSAC GF-5 and API SN specifications Delivers excellent performance for wear, cleanliness and fuel economy in the latest direct injection engines HiTEC® 11145 is used at 8.5% wt. to formulate all recommended grades.

HiTEC® 11180

Passenger car motor oil additive package to meet ILSAC GF-5, API SN Plus, and GM dexos1TM gen. 2 specifications.

HiTEC® 11180 is a formulated PCMO DI additive package for use in fluids requiring enhanced performance in today's latest turbocharged direct injection engines (TDGI). Appearance: Dark brown viscous liquid Specific Gravity @ 15.6/15.6°C: 0.967 Density, lb/gal: 8.06 Viscosity @ 100°C, cSt: 87 Flash Point, °C (PMCC): 135 min. Max Handling Temp: 70°C Shelf Life: 3 months @ 50°C, 36 months @ ambient (10-40°C) Fully meets license and approval requirements for: ILSAF GF-5 AAPI SN Specifications GM Dexos 1TM Gen 2 Designed for excellent antiwear, cleanliness and fuel economy performance HiTEC® 11180 is used at 10.1% wt. to formulate all recommended grades and approved oils.

HiTEC® 12213

Heavy duty engine oil additive package for mainline engine performance (CK-4 and FA-4).

HiTEC® 12213 is a dispersant inhibitor (DI) package for use in formulating heavy duty diesel engine oils. Exceed the industry standards for wear protection and oxidation performance by using the HiTEC® 12213. Appearance: Dark brown Density, lbs/gal.: 7.90 Specific Gravity @ 15.6/15.6°C: 0.947 Viscosity @ 100°C, cSt.: 105 Flash Point, °C (PMCC): 135 min. TBN, mg KOH/g: 64 Formulated to exceed API CK-4 and FA-4 specifications in the areas of wear, oxidation and contamination control. Designed to fit your operational needs; can be supplied as a stand alone DI package or as a booster used in conjunction with HiTEC® 12210. When properly formulated with the HITEC 5748A, OCP Viscosity modifier, the fluid meets licensing requirements for; API CK-4 in SAE 15W-40 and 10W-30 API FA-4 in SAE 10W-30

HiTEC® 2030

Non-silicone defoamer additive designed for use in driveline and industrial lubricants.

HiTEC® 2030 is a foam tendency and stability/minimizer for industrial and driveline applications Appearance Clear light yellow liquid Colour APHA: 200 max Density at 15°C, g/ml: 0.85 Specific Gravity, 60/60°F: 0.85 Flash Point, °C (PMCC): 59 Viscosity at 40°C, mm²/s: 40 Silicon level, ppm: 0 Refractive Index: 1.439 Active polymer content, %: 40 Max Handling Temp: Ambient temperature Shelf Life: 36 months at ambient temperature Compatible with other oils and packaging materials Excellent foam reduction performance Great air entrainment reduction properties Ease of blending minimizes problems that may arise during production

HiTEC® 3080

Multi-vehicle manual transmission fluid additive for European/Asian vehicles outside warranty.

HiTEC® 3080 is a multi-vehicle MTF additive specifically designed for European and Asian vehicles that are outside warranty. When used with the proper base oil, the HiTEC® 3080 can provide enhanced engine protection and performance. Appearance: Light Brown/Amber Oily Liquid Density at 15°C, g/ml: 0.959 Flash Point (PMCC), °C: 76 Kinematic viscosity at 40°C, mm2/s: 120 Superior bearing and gear protection Excellent cleanliness Good low temperature performance Robust corrosion protection The recommended treat-rate of HiTEC® 3080 additive is 7.0% wt.

HiTEC® 312

Sulfur containing extreme pressure additive.

HiTEC® 312 is an extreme pressure additive containing a high percentage of sulfur for enhanced load-carrying capabilities. The HiTEC® 312 is especially useful in shock-loaded gear lubricants and surfaces which experience very high loads. Appearance: Clear bright yellow to amber liquid Density, lbs/gal.: 9.45 lbs. Specific Gravity @ 15.6/15.6°C: 1.135 Viscosity @ 100°C, cSt: 8.0 Flash Point, °C (PMCC): 80 min. Sulfur, % wt.: 46.3 Max Handling Temp: 50°C Shelf Life: 24 months @ ambient temperature (10-40°C) Ashless Good EP and load-carrying properties Low reactivity to copper containing alloys High sulfur content Excellent booster for FZG, 4 ball weld, CRC L-42 and other EP tests HiTEC® 312 is typically used at 0.5% wt. (0.43% vol.) to 5.0% wt. (4.35% vol.) for lubricants and EP greases.

HiTEC® 3301

Shear stable viscosity modifier for use in formulating automotive gear oils.

HiTEC® 3301 is a multi-functional, shear-stable viscosity modifier designed for use in formulating a variety of automotive gear oils. Specifically engineered for applications with severe requirements for oxidation stability and filterability. Appearance: Light yellow viscous fluid Specific Gravity @ 15.6/15.6°C: 0.9007 Density, lbs/gal.: 7.50 Flash Point, °C (PMCC):170 min. Viscosity @ 100°C, cSt: 176 Pour Point, °C: -18 max. Approved in SAE J2360 and API GL-5 gear oils Excellent handling properties Very shear stable Compatible with both mineral & synthetic base oil Contains additional seal swell additive Good oxidation stability HiTEC® 3301 may be used in blends up to about 55% wt. depending on viscometrics and performance requirements.

HiTEC® 33110

Olefin copolymer viscosity index improver designed for gear oil formulating, can be used to replace high viscosity synthetic base oil.

HiTEC® 33110 is a very shear stable OCP based VII for use in formulating gear oils requiring heavy load capabilities. It can also be used as a replacement for high viscosity synthetic base oils. Appearance: Clear to slightly hazy pale yellow liquid Specific Gravity @ 15.6/15.6°C: 0.853 Density, lbs/gal.: 7.10 Viscosity @ 100°C, cSt: 1,142 Flash Point, °C (PMCC): 305 Max Handling Temp: 120°C Shelf Life: 36 months @ ambient temperature Superior shear stability Highly efficient dosage rates in formulating gear oils. Can be used as an effective replacement for PIB (polyisobutylene) based thickeners Typical treat rate of the HiTEC® 33110 will vary depending on desired final fluid viscosity.

HiTEC® 3315

High sulfur percentage extreme pressure (EP) additive for formulating lubricants that require high load carrying capabilities.

HiTEC® 3315 is an Ashless EP additive for formulating lubricants that will experience very high loads during operation. Decrease the wear on gear and equipment at high pressure by utilizing the HiTEC® 3315 in lubricant formulations. Appearance: Red to amber liquid Density, lbs./gal.: 8.63 Specific Gravity @ 15.6°C: 1.0281 Viscosity @ 40°C, cSt: 3.5 Flash Point, °C (PMCC): 76 min Ashless chemistry Good EP and load-carrying properties Low reactivity to copper containing alloys High sulfur content Excellent booster for FZG, 4-ball weld, CRC L-42, and other EP tests Dosage levels of the HiTEC® 3315 vary by application and requirements.

HiTEC® 335

Multi-functional gear oil additive booster package for use in combination with HiTEC® 350.

HiTEC® 335 is a gear oil additive that is engineered to boost performance of the HiTEC® 350 for formulating industrial and automotive gear oils. Rationalize inventory while offering a premium selection of finished fluids. Appearance: Dark brown viscous liquid Specific Gravity @ 15.6/15.6°C: 0.985 Density, lbs/gal.: 8.20 Viscosity @ 100°C, cSt: 72.5 Flash Point, °C,: 90 min. Allows inventory rationalization Simplifies handling, logistics and formulation Provides flexibility to meet many market need The combination of the dosages below will provide equivalent performance to that of HiTEC® 385; Industrial HiTEC® 350: 1.4%wt. (1.2%vol) HiTEC® 335: 0.6%wt. (0.5% vol) Automotive HiTEC® 350: 5.25%wt. (4.5%vol) HiTEC® 335: 2.25%wt. (2.0% vol)

HiTEC® 340

Economic-tier automotive gear oil additive package for axles and transmissions.

HiTEC® 340 is a performance additive for automotive axle and transmission oils formulated for economic tier consumers. Appearance: Clear yellow liquid Density at 15°C, g/ml: 1.098 Density, lbs/gal.: 9.16 Specific Gravity at 15.6/15.6°C: 1.10 Flash Point, °C (PMCC): 76 min. Kinematic Viscosity at 100°C, mm2/s: 8.4 Max Handling Temp: 65°C Shelf Life: 24 months at 25°C, 6 months at 40°C Robust performance in automotive applications Cost savings at all treat-rates Extensive history of trouble-free performance Suitable for extended drain for MAN Treat rates of the HiTEC® 340 will vary on application and base stock, but example treat rates by spec are below: 4.0%wt API GL-5 (eqv. MIL-L-2105D) 2.0%wt API GL-4

HiTEC® 3419

Multivehicle Service ATF Additive Package.

HiTEC® 3419 is an additive package for Automatic Transmission Fluid formulating for use in Asian, North American and European automatic transmissions. Fluids properly formulated with the HiTEC® 3419 meet requirements set forth in JASO M315 Type 1A. Appearance: Dark brown liquid Sp. Gr. @ 15.6/15.6°C: 0.914 Kinematic Viscosity @ 100°C, cSt: 120 Kinematic Viscosity @ 40°C, cSt: 1,650 Flash Point, °C (PMCC): 120min Phosphorus, %M: 0.19 Sulfur, %M: 0.16 Boron, %M: 0.09 Nitrogen, %M: 1.30 Max Handling Temp: 60°C Shelf Life: 24 months @ ambient temperature Suitable for multi-vehicle lubricants Optimize supply chain and production process Extended friction durability to enhance anti-shudder performance Outstanding torque capacity Seal compatibility provides leak protection

HiTEC® 3421

Automatic Transmission Fluid (ATF) additive for Group II base oils, suitable for use in Ford and GM vehicles of model years 2005 and earlier.

HiTEC® 3421 is formulated for use in service fill automatic transmission fluids for all Ford and GM vehicles of 2005 or earlier. Fluids formulated with the HiTEC® 3421 should not be used for applications requiring Type F® fluid or with DCT or CVT transmissions. Appearance: Hazy light amber liquid Specific Gravity @ 15.6/15.6°C: 0.913 Density, lbs/gal.: 7.60 Viscosity @ 100°C, cSt: 277 Viscosity @ 40°C, cSt: 2543 Flash Point, °C (PMCC): 120 min. Performance demonstrated in complete series of GM and Ford tests. Superior anti-wear protection. Excellent oxidation control. Enhanced friction performance. HiTEC® 3421 is used at 8.2% wt. (7.66% vol.) when combined with a suitable Group II base oil.

HiTEC® 343

Multi-functional gear oil additive package with ZF and MAN approvals.

HiTEC® 343 is a multifunctional gear oil additive for use in formulating both automotive & industrial lubricants. Appearance: Clear yellow liquid Density at 15°C, g/ml: 1.080 Density, lbs/gal.: 9.01 Specific Gravity at 15.6/15.6°C: 1.082 Flash Point, °C (PMCC): 76 min. Kinematic Viscosity at 100°C, mm2/s: 9.0 Max Handling Temp: 65°C Shelf Life: 24 months at ambient temperature Low treat-rate Unique MAN and ZF approval - MAN 342 M2(160,000 km), ZF TE-ML 12E (bus axles) Rationalize inventory through additives multifunctionality Dosage rates will vary by application, but typical treat rates range between 0.1-4.4%wt.

HiTEC® 3435A

Multi-vehicle CVT additive package with excellent anti-shudder durability.

HiTEC® 3435A is formulated for superior performance in a multi-vehicle CVT fluid. It provides excellent extreme pressure & anti-wear performance as well as extending fluid life through its enhanced oxidative stability. Appearance: Dark brown liquid Specific Gravity @ 15.6/15.6°C: 0.913 Kinematic Viscosity @ 100°C, cSt: 108 Flash Point, (PMC), °C: 160 Extended friction durability provides superior anti-shudder operation and enhanced driving comfort Very high level torque capacity Higher safety factor Longer transmission life Extended service interval HiTEC® 3435A additive package is recommended for use at 17.0% weight with suitable API Group III base oils.

HiTEC® 3460

Premium Dual Clutch Transmission (DCT) fluid additive.

HiTEC® 3460 is a (DCT) Dual Clutch Transmission fluid additive package engineered for use in a variety of OEM vehicles. Appearance: Dark Brown liquid Specific Gravity @ 15.6/15.6°C: 0.911 Kinematic Viscosity @ 100°C, cSt: 52 Flash Point, °C (PMCC): 120min Maximum handling temperature: 60 °C Shelf life @ ambient: 18 months Exceptional copper corrosion Excellent oxidation control leading to longer fluid life Good seal compatibility for leak prevention HiTEC® 3460 is recommended for use at a treat rate of 12.80% weight along with a shear stable viscosity index improver in Group III base oil.

HiTEC® 3488

Multi-transmission fluid additive package This grade suitable for formulating both step-type and CVT service fluids.

HiTEC® 3488 is an innovative multi-functional additive package for formulating CVT and Step Automatic transmission fluids. When properly formulated with a group III base oil, significant performance gains can be been seen and proven Afton's extensive testing. Appearance: Dark Brown Liquid Specific Gravity @ 15.6/15.6°C: 0.912 Kinematic Viscosity @ 100°C, cSt: 110 Flash Point, (PMCC), °C: 160 Maximum handling temperature: 70 °C Shelf life @ ambient: 24 months Optimize your supply chain through inventory rationalization. Excellent ATF performance measured in JASO M315 protection tests for extended service intervals. High steel-on-steel friction and wear protection in continuously variable transmission types, validated via belt box testing. Improved torque capacity and anti-shudder performance. Higher safety factors. Longer transmission life. Enhanced driving comfort. The HiTEC® 3488 is recommended for use in suitable API Group III base oils at 17.2% weight. For formulation questions, please reach out to your ChemPoint representative.

HiTEC® 350

A versatile gear oil additive designed for both automotive & industrial lubricant manufacturing.

HiTEC® 350 is a multifunctional gear oil additive engineered for both automotive and industrial lubricants. The additive can also be used to product cost-effective industrial gear, rock drill, grease and a variety of industrial fluids and lubricants. Appearance: Clear amber liquid Density, lbs/gal.: 8.69 Speci c Gravity @ 15.6/15.6°C: 1.044 Viscosity @ 100°C, cSt: 9 Flash Point, °C (PMCC): 83 min. Max Handling Temp: 40°C Shelf Life: up to 12 months @ 25°C Multifunctionality allows inventory rationalization and simplifies handling, logistics and formulation Excellent compatibility with commonly used seal materials Exceptional EP protection and durability Improved copper-corrosion protection Tolerates moderate contamination Strong demulsibility and foam suppression Excellent storage stability HiTEC® 350 has multiple recommended treat rates that are dependent on desired fluid performance and any relevant specifications that need to be met.

HiTEC® 350G

Multifunctional EP/AW additive for grease formulating.

HiTEC® 350G is a multi-function cost effective grease additive that combines enhanced EP/AW performance with yellow metal and steel corrosion inhibitors. Appearance: Clear amber liquid Density, lbs/gal.: 8.69 Specific Gravity @ 15.6/15.6°C: 1.044 Viscosity @ 100°C, cSt: 9 Flash Point, °C (PMCC): 83 min. Max Handling Temp: 40°C Shelf Life: 12 months @ 25°C Multifunctionality allows inventory rationalization and simplifies handling, logistics and formulation Exceptional EP protection and durability Improved copper corrosion protection Excellent compatibility with commonly used seal materials Carefully formulated to maintain integrity of grease thickener system Sulfur-phosphorus chemistry Treat rates for the HiTEC® 350G usually range between 0.5% and 5% wt. However, exact dosage rates will depend on desired fluid performance.

HiTEC® 355

Extended-drain heavy duty gear axle additive for formulating with mineral base oils.

HiTEC® 355 is a performance additive designed for long drain axle fluid formulations in heavy duty axles. It was field tested in severe service conditions for both Dana and Meritor front & rear axles. Appearance Clear: Dark amber liquid Specific Gravity @ 15.6/15.6°C: 1.004 Density, lbs./gal.: 8.36 Viscosity @ 100°C, cSt: 23 Flash Point, °C (PMCC): 85 min. Max Handling Temp: 65°C Shelf Life: 12 months @ ambient temperature Enhanced protection against rust and corrosion Highly stable, will not separate in the presence of heat or water Effectively inhibits oxidation and resists deterioration from heat Outstanding anti-foam protection Treat rates of the HITEC® 355 will vary based on desired Axle Specs or Manual Transmission Specs.

HiTEC® 363

Extended-drain heavy duty manual transmission additive for use in mineral base oils.

HiTEC® 363 is an extended-drain manual transmission additive designed for use in mineral base oils. Can be used to formulate a manual transmission fluid for a long-drain performance in severe service conditions. Appearance: Hazy light amber liquid Specific Gravity @ 15.6/15.6°C: 0.925 Density, lbs/gal.: 7.70 Viscosity @ 100°C, cSt: 50 Flash Point, °C (PMCC): 115 min. Max Handling Temp: 60°C Shelf Life: 18 months @ 30-35°C Outstanding cold temperature performance Protects against yellow-metal corrosion Excellent wear protection Inhibits oxidation and resists the effects of heat Compatible with a variety of seal materials Resists deposit formation

HiTEC® 369

Automotive gear oil additive for use in light-duty and heavy-duty axles.

HiTEC® 369 is a premium mono-functional gear oil additive for automotive light-duty and heavy-duty axles and non-synchronized manual transmission fluids. Appearance: Clear light amber liquid Specific Gravity @ 15.6/15.6°C: 1.022 Density, lbs/gal.: 8.51 Viscosity @ 100°C, cSt: 13 Flash Point, °C (PMCC): 85 min. Max Handling Temp: 65°C Shelf Life: 24 months @ ambient temperature Excellent thermal and oxidation stability Exceptional compatibility with commonly used seal materials Good EP protection Superior copper corrosion protection Strong foam suppression Superior storage stability Excellent handling and pump-ability The HiTEC® 369 can be used as a top-off service fill fluid or used in conjunction with HiTEC® 397 to formulate a fluid with additional limited slip capability.

HiTEC® 381

Automotive gear oil additive package for standard tier axle and transmission fluids.

HiTEC® 381 is a gear oil additive package designed for automotive formulations that meet OEM requirements for commercial vehicles. The additive provides superior anti-wear protection and demonstrated improved frictional properties. Appearance: Clear dark amber liquid Density @ 15°C, g/ml: 1.004 Density, lbs/gal: 8.38 Specific Gravity @ 15.6/15.6°C: 1.006 Flash Point, °C (PMCC): 85 min. Kinematic Viscosity @ 100°C, mm2/s: 9.3 Max Handling Temp: 40°C Shelf Life: 12 months @ ambient temperature Improved axle efficiency and fuel economy due to significantly lower operating temperatures Improved pitting performance resulting in longer equipment life and extended drain Lower chlorine (13ppm vs 44ppm) and less odor Improved oxidation performance Better performance with commonly used seals. 50%+ higher drain interval MTF and TDL capability when boosted with HiTEC® 382 additive Treat rates will vary on desired performance and OEM specifications.

HiTEC® 385

Premium performance gear oil additive for use in automotive and industrial gear oils & greases.

HiTEC® 385 is a premier multifunctional gear oil additive engineered to boost performance in automotive & industrial lubricants. It has been designed to enhance production and blending flexibility operations including automotive, automotive limited slip, commercial and industrial gear, greases and a variety of industrial fluids. Appearance: Clear amber liquid Specific Gravity @ 15.6/15.6°C: 1.027 Density, lbs/gal.: 8.55 Viscosity @ 100°C, cSt: 15 Flash Point, °C: 82 min. Max Handling Temp: 40°C Shelf Life: Up to 12 months @ 25°C Legacy performance data and approvals in most US base oils Long history of reliable field performance Strong foam suppression Soluble in Group I and II base stocks Excellent handling and pump-ability

HiTEC® 388

Premium automotive gear oil additive for light & heavy duty axles.

HiTEC® 388 is a premium performance additive for formulating automotive gear oils for light-duty and heavy-duty axles. HiTEC® 388 can also be used to formulate fluids meeting standard industry specifications below; API GL-5, GL-4 and GL-3 Mack G0-J Meritor 0-76 D (80W-90) Meritor 0-76A (85W-140) SAE J2360 ZF TE-ML07A & TE-ML08 API MT-1 Appearance: Clear amber liquid Density, lbs/gal.: 8.37 Specific Gravity @ 15.6/15.6°C: 1.005 Viscosity @ 100°C, cSt: 12.5 Flash Point, °C (PMCC): 80 minimum Phosphorus, %wt.: 0.87 Sulfur, %wt.: 22.5 Max Handling Temp: 65°C Shelf Life: 24 months @ ambient temperature Excellent thermal and oxidation stability Excellent compatibility with commonly used seal materials Proven transmission performance Exceptional EP protection and durability Superior copper corrosion protection Strong demulsibility and foam suppression Superior storage stability

HiTEC® 397

Top-treat additive package for gear oils used in modern limited slip axles.

HiTEC® 397 is a superior limited slip top-treat additive package for today's axle technologies. The additive can be used as an aftermarket top-treat or incorporated directly into the gear oil at the blend site. Appearance: Clear yellow to amber liquid Density, lb/gal.: 7.63 Specific Gravity @ 15.6/15.6°C: 0.91 Viscosity at 100ºC, cSt: 7.1 Flash Point, °C (PMCC): 125 min. Max Handling Temp: 70°C Shelf Life: 24 months @ ambient temperature Long proven frictional performance Promotes smooth clutch engagement without chatter Minimizes NVH associated with momentary cyclic torque loss Satisfies torque/power requirements necessary for modern vehicles Friction coefficient level maintained over life of fluid for good torque transfer Laboratory and field performance tested in a variety of axles and friction surfaces

HiTEC® 398

Premium gear oil additive for GL-5 and limited slip automotive lubricant formulation.

HiTEC® 398 is a premium gear oil performance additive used for formulating fluids for standard axles with limited slip traction control. It can be used in formulas utilizing both mineral oil and synthetic base stocks. Appearance: Clear amber liquid Density, lbs/gal.: 8.59 Specific Gravity @ 15.6/15.6°C: 1.031 Viscosity @ 100°C, cSt: 11.1 Flash Point, °C (PMCC): 95 minimum Max Handling Temp: 40°C Shelf Life: 24 months @ ambient temperature Limited slip and standard axle applicability Thermal and oxidative stability Seal compatibility Extreme pressure protection and durability Copper corrosion protection Soluble in Group I and II base stocks Excellent handling and pump-ability

HiTEC® 4313

Ashless copper corrosion inhibitor and extreme pressure additive for use in formulating fuel oils & greases.

HiTEC® 4313 is an ashless alkyl thiadizole corrosion inhibitor for use in a variety of grease and fuel oil formulations. Appearance: Yellow to amber clear viscous liquid Density, lbs/gal: 9.32 Specific Gravity @ 15.6/15.6°C: 1.12 Viscosity @ 100°C, cSt: 13.6 Flash Point, °C (PMCC): 130 min. Sulfur, % wt.: 35 Nitrogen, % wt.: 6.4 TAN, mgKOH/g: 30 Color, ASTM D-1500: 2 Max Handling Temp: 65°C Shelf Life: 30 months @ 0-25°C, 2-3 months @ 50°C Protects copper containing alloys from degradation due to sulfur Excellent metal passivator and corrosion inhibitor properties Strong antioxidant performance Provides extreme pressure properties Provides copper passivator properties in selective fuels Booster for FZG, TIMKEN, ASTM D130, ASTM D4048 and many other EP corrosion tests Typical dosage of HiTEC® 4313 is 0.01% wt for industrial oils and ranges from 0.045% wt to 0.15% wt for automotive oils dependent on base oil.

HiTEC® 536

Rust Inhibitor additive for use in formulating hydraulic, turbine, circulating oils and various industrial & automotive lubricants.

HiTEC® 536 is a mixture of carboxy-imidazoline that provides excellent rust protection, water separation and oxidation stability for a variety of industrial and automotive lubricant formulations. Appearance: Dark red-brown viscous liquid Density, lbs/gal. : 7.75 Specific Gravity @ 15.6/15.6°C: 0.930 Viscosity @ 100°C, cSt: 39 Flash Point, °C (PMCC): 110 min. Max Handling Temp: (<24 hours): 70°C Shelf Life: 6 months @ 50°C, 12 months @ ambient (10-35°C) Rust protection Water separation Enhanced oxidation stability Multifunctional - useful in many different lubricants and grease applications The recommended treat rate for HiTEC® 536 is 0.05% to 2.0% wt. depending upon the application.

HiTEC® 5710

Dispersant viscosity index improver for use in a variety of transmission fluid formulations.

HiTEC® 5710 viscosity index improver is based on dispersant polymethacrylate (PMA) chemistry and is recommended for a range of applications where low temperature properties and shear stability are important. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density @ 15°C, g/ml: 0.891 Flash Point, °C (PMCC): 120 min. Kinematic Viscosity @ 100˚C, mm2/s: 850 Kinematic Viscosity @ 40˚C, mm2/s: 6660 Max Short Term Handling Temp: 100˚C Shelf Life: 36 months @ ambient temperature The right shear stability to maximize performance and minimize cost in ATF, tractor and other applications Facilitates the flexibility to use Group I or II base oils Adds cleanliness properties which may lower the dosage of additional dispersants Exceptional low temperature properties even after the lubricant has been subject to oxidation Used by OEMs in factory fill applications Good handling characteristics

HiTEC® 5724

Polymethacrylate viscosity Index improver for automotive & industrial fluid formulations.

HiTEC® 5724 is a methacrylate polymer based viscosity index improver that can be used in hydraulic fluids as well as crankcase oils & industrial lubricants. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs./gal: 7.83 Specific Gravity @ 15.6/15.6°C: 0.94 Flash Point, C° (PMCC): 120 min. Kinematic Viscosity @ 40°C, cSt 46,000 Kinematic Viscosity @ 100°C, cSt 1250 Provides both viscosity index and pour point depressant characteristics Excellent solubility in solvent neutral oils Excellent shear stability Diluted options available

HiTEC® 5733

Polymethacrylate viscosity index improver for use in industrial oils & power steering fluids.

HiTEC® 5733 is a polymethacrylate based viscosity index improver for use in a variety of industrial oil formulations, and provides effective pour point depressant performance. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs./gal.: 7.58 Specific Gravity @ 60/60°F: 0.91 Kinematic Viscosity @ 40°C, cSt: 16600 Kinematic Viscosity @ 100°C, cSt: 1030 Flash Point, C° (PMCC): 115 min Provides both viscosity index and pour point depressant characteristics Excellent solubility in solvent neutral oils

HiTEC® 5736A

Polymethacrylate viscosity index improver for industrial oils & shock absorber fluids.

HiTEC® 5736A is a polymethacrylate based viscosity index improver for use in a variety of industrial oils and shock absorber fluids. It also provides an efficient pour point depressant performance. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs/gal.: 7.45 Specific Gravity @ 15.6/15.6°C:0.895 Kinematic Viscosity @ 40°C, cSt 4,800 Kinematic Viscosity @ 100°C, cSt 775 Flash Point, °C (PMCC) 120 min. Pour Point, °C -48 max Provides both viscosity index and pour point depressant characteristics Excellent solubility in solvent neutral oils

HiTEC® 5738

Dispersant polymethacrylate Viscosity Index Improver (VII) for use in ATF, MTF and CVT fluid formulating.

HiTEC® 5738 is a dispersant methacrylate polymer additive for use as a Viscosity Index Improver (VII) for transmission fluids for automatic, manual and continuously variable applications. Increase shear stability of the final fluids and provide consistent performance for both low and high temperature operation. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs/gal.: 7.83 Specific Gravity @ 15.6/15.6°C: 0.94 Kinematic Viscosity @ 100°C, cSt: 620 Flash Point, C° (PMCC): 120 min. Excellent solubility in solvent neutral oils and hydrocracked base stocks Highly shear stable Dosages of the HiTEC® 5738 will vary based on application & base stock.

HiTEC® 5739

Polymethacrylate viscosity index improver for use in formulating power transmission and a variety of industrial fluids.

HiTEC® 5739 is a methacrylate polymer recommended for power transmission fluid formulations as well as a variety of industrial lubricants. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs./gal.: 7.83 Specific Gravity @ 15.6/15.6°C 0.94 Kinematic Viscosity @ -40°C, cSt 11000 Kinematic Viscosity @ 100°C, cSt 575 Flash Point, C° (PMCC) 120 min. Excellent shear stability Fluid cleanliness through enhanced filterability High hydrolytic stability Dosages can range from 5% to 15% and will vary on application and desired viscometric values.

HiTEC® 5748 A

Olefin copolymer viscosity index improver (OCP VII) for use in heavy duty engine oil formulations.

HiTEC® 5748A is an olefin copolymer viscosity index improver (OCP VII) for formulation of multigrade crankcase oils. Appearance: Clear to hazy viscous liquid Density, lbs/gal: 7.16 Specific Gravity @ 15.6/15.6°C: 0.860 Viscosity @ 40°C, cSt: 15,000 Viscosity @ 100°C, cSt: 1125 Flash Point, °C (PMCC): 155 min. Color, ASTM D1500: 3.0 max. Thickening Power @ 100°C, cSt: 6.55 Max Handling Temp: 250°F (120°C) Shelf Life: 36 months @ ambient temperature Excellent shear stability requirements Extensively field tested Exceeds European (CCMC) DIN 51382 and Peugeot P-204 shear stability requirements Surpasses MIL-L-46152B stay-in-grade requirements Typical treat rates of the HiTEC® 5748 A fall between 7-10%.

HiTEC® 5751

50 SSI - Olefin copolymer viscosity index improver (OCP VII) for use in formulating passenger car motor oils.

HiTEC® 5751 is a olefin copolymer viscosity index improved (OCP VII) used when formulating crankcase & Industrial oils. Appearance: Clear to slightly hazy greenish tan viscous liquid Specific Gravity @ 15.6/15.6°C: 0.858 Density, lbs/gal: 7.14 Flash Point, °C (PMCC): 135 min. Viscosity @ 40°C, cSt: 15,000 Viscosity @ 100°C, cSt: 1,240 Color, ASTM D1500: 3.0 max. Diluted Viscosity @ 100°C: 13.0 SSI: 50 Max Handling Temp: 250°F (120°C) Shelf Life: 36 months @ ambient temperature Cost-effective VI improver for crankcase lubricants Robust low-temperature properties Low pour point depressant dosages Typical dosage rates of HiTEC® 5751 range between 5-12%.

HiTEC® 5754A

35 SSI - Olefin copolymer viscosity index improver (OCP VII) for use in formulating passenger car motor oils.

HiTEC® 5754A is an olefin copolymer viscosity index improver for use in designing industrial and crankcase oils. It can be used to manufacture API SN, ILSAC GF-5 and GM dexos 1 licensable engine oils when used with the proper DI package. Appearance: Clear to slightly hazy greenish tan viscous liquid Density, lbs/gal: 7.14 Specific Gravity @ 15.6/15.6°C: 0.8580 Viscosity @ 100°C, cSt: 1,090 Viscosity @ 40°C, cSt: 15,000 Flash Point, °C (PMCC): 135 min. Color, ASTM D1500: 3.0 max. SSI %, ASTM D6278, 35 Max Handling Temp: 250°F (120°C) Shelf Life: 36 months @ ambient temperature Cost-effective viscosity index improver for crankcase lubricants GM dexos1® capability Bosch stay-in-grade shear stability Robust low-temperature properties Typical dosage rates of the HiTEC® 5754A range between 4-10%.

HiTEC® 5756

Olefin copolymer VI improver for use in formulating crankcase and industrial oils.

HITEC® 5756 is an OCP VII for use in formulating a variety of crankcase and industrial oils. It is particularly well suited for formulating medium speed diesel engine oils. Appearance: Clear to slightly hazy greenish tan viscous liquid Specific Gravity @ 15.6/15.6°C: 0.858 Density, lbs/gal.: 7.16 Flash Point, °C (PMCC): 135 min. Viscosity @ 40°C, cSt: 15,000 Viscosity @ 100°C, cSt: 1240 Color, ASTM D1500: 5 max. Max Handling Temp: 250°F (120°C) Shelf Life: 36 months @ ambient temperature Cost-effective VI improver for crankcase lubricants Extensively field tested Robust low-temperature properties Low pour point depressant dosages

HiTEC® 5760

Olefin copolymer (OCP) Viscosity Index Improver designed for use in automotive & industrial gear oils.

HiTEC® 5760 is an Olefin Copolymer Viscosity Index Improver (OCP VII) engineered for use in formulating industrial & automotive gear & transmission oils. Appearance: Clear to slightly hazy pale yellow liquid Specific Gravity @ 15.6/15.6°C: 0.853 Density, lbs./gal.: 7.10 Viscosity @ 100°C, cSt: 1,100 Flash Point, °C (PMCC): 180 min. Max Handling Temp: 120°C Shelf Life: 36 months @ ambient temperature Highly shear stable Can be used to replace high viscosity synthetic base stocks in heavily loaded applications (axle fluids) Does not contain a diluent oil Treat rate of the HiTEC® 5760 will vary by application.

HiTEC® 5777

Dispersant olefin copolymer viscosity index improver.

HiTEC® 5777 is a dispersant OCP VII that provides superior protection against soot buildup and wear and prevents oil thickening. Appearance: Clear to slightly hazy brown viscous liquid Specific Gravity @ 15.6/15.6°C: 0.863 Density, lbs/gal.: 7.19 Flash Point, °C (PMCC): 135 min. Viscosity @ 100°C, cSt: 1135 Thickening Power (TP), cSt @ 100º C: 6.1 Max Handling Temp: 250°F (120°C) Shelf Life: 36 months @ ambient temperature Offers dispersancy performance in both gasoline and diesel engines Excellent shear stability capable of meeting European requirements Excellent engine cleanliness in field testing

HiTEC® 5785H

Shear stable viscosity index improver for multigrade hydraulic oil formulations.

HiTEC® 5785H is a highly shear stable VII with added pour point depressant for formulating multigrade hydraulic oils. Kinematic Viscosity @ 100°C, cSt: 1200 Flash Point, PMCC, °C: 120 min. Specific Gravity @ 60°F/60°F: 0.94 Max Handling Temp: 90° Shelf Life: 3 months @ 60-90°C, 60 months @ ambient temperature Superior viscosity index improvement without compromise to hydrolytic stability or filtration performance Oils containing HiTEC® 5785H PMA are approved by major OEMs and are on the approved Denison Parker HF-0 list Suitable for use in formulations designed to meet Eaton, MAG, DIN 51524 (ii), US AIST, Bosch Rexroth, SAE, ISO and JCM AS Provides both VI and PPD characteristics Soluble in Group I and Group II base oils Treat rates of the HiTEC® 5785H will vary on desired fluid viscosity, base oil and specification required.

HiTEC® 5788

Polymethacrylate pour point depressant for use in a wide variety of base oils.

HiTEC® 5788 is a PMA pour point depressant additive for use in formulating Automotive lubricants. Appearance: Clear to slightly hazy yellow to amber viscous liquid Specific Gravity 15.6/15.6°C: 0.87 Density, lbs./gal.: 7.37 Flash Point, C° (PMCC)1 120 min. Viscosity @ 100°C, cSt.: 450 Color, ASTM D1500 2.5 max. Provides both viscosity index and pour point depressant characteristics. Can permit selection of less costly base stocks which have not received severe dewaxing. Typical dosage of the HITEC® 5788 will range between 0.02 and 0.5%wt, depending on application & base oil.

HiTEC® 5789

Polymethacrylate pour point depressant for automotive and heavy duty applications.

HiTEC® 5789 is a polymethacrylate based pour point depressant to improve low temperature performance in a variety of base oils. Appearance: Clear to slightly hazy yellow to amber viscous liquid Density, lbs/gal.: 7.58 Specific Gravity @ 15.6/15.6°C: 0.91 Viscosity @ 100°C, cSt: 125 Color, ASTM D1500 2.5 max. Broad utility in a variety of base stocks Improves pour point of ExxonMobil Group II base oil, and many others Low viscosity for ease of handling The recommended concentration for HiTEC® 5789 is generally between 0.02 and 2.0% wt. with the exact dosage being determined by actual tests in the finished oil.

HiTEC® 5845A

Solid Olefin-based Viscosity Index Improver for formulating Industrial and crankcase oils.

HiTEC® 5845A is a solid OCP VII in a soluble wrapper for use in formulating crankcase and industrial lubricants. HiTEC® 5845A is packaged in an easy-to-handle wrapper that does not need to be removed during grinding/solubilizing process steps. Appearance: Pale white to light amber polymer Volatiles, % wt.: 1.3 max. Propylene, % wt.: 49 Total Ash, % wt.: 0.15 max. Shear Stability Index of Liquid VII, %: 48 Max Dissolving Temp: 150°C with nitrogen blanketing Shelf Life: 36 months @ ambient temperature Easy to handle in solid form Can be further sheared down to increase the shear stability Robust low temperature properties Low pour point depressant requirement

HiTEC® 611

Highly basic calcium sulfonate detergent additive for use in formulating a variety of automotive & industrial oils and greases.

HiTEC® 611 is a highly basic calcium sulfonate detergent that protects against deposits formed at high temperatures and controls rust at low operating temperatures. Appearance: Dark brown viscous liquid Density, lbs./gal.: 9.39 Specific Gravity @ 15.6/15.6°C: 1.127 Viscosity @ 100°C, cSt: 30 Flash Point, °C (PMCC): 170 min. Calcium, % wt.: 11.9 TBN, mg KOH/g: 307 Excellent filterability Excellent phenate compatibility High rate of acid neutralization HiTEC® 611 sulfonate detergent is used at dosages varying from 0.1% wt. in industrial oils up to 5% wt. in marine oils.

HiTEC® 614

Sulfonate detergent additive for deposit control in gasoline & diesel engine oils.

HiTEC® 614 is a neutral calcium detergent for formulating engine oils for both diesel and gasoline engines. Also provides corrosion inhibitor performance in grease formulations. Appearance: Dark brown viscous liquid Density, lbs/gal.: 7.83 Specific Gravity @ 15.6/15.6°C: 0.94 Viscosity @100°C, cSt: 16 Flash Point, °C (PMCC): 150 min. Calcium, % wt.: 2.60 Chlorine, % wt.: 0.26 TBN, mg KOH/g: 27.5 Water, % wt.: 0.3 max Sulfur, % wt.: 2.3 Max Handling Temp: 110°C Shelf Life: 36 months Synthetic alkylate High water tolerance Excellent filterability Rust inhibition in cutting oils and greases

HiTEC® 638

Ashless dispersant to control low temperature deposit formation in crankcase lubricants.

HiTEC® 638 is an ashless dispersant for formulating automotive gear oils. Appearance: Dark brown viscous liquid Density, lbs/gal.: 7.70 Specific Gravity @ 15.6/15.6°C: 0.924 Viscosity @ 100°C, cSt: 570 Flash Point, °C (PMCC): 150 min. Nitrogen, % wt.: 2.0 TBN, mgKOH/g: 43 Total Amine, meq/g: 0.76 Max Handling Temp: 125°C (under nitrogen) Shelf Life: 3 months @ 90°C (nitrogen), 24 months @ ambient (sealed drums) Deposit control Long field history in many engine oil applications

HiTEC® 643D

Ashless dispersant additive to control sludge formation at low temperatures.

HiTEC® 643D is an ashless dispersant additive for control of low temperature sludge formation. Can be used in formulating engine oils, driveline fluids and industrial oils. Appearance: Dark brown viscous liquid Density, lbs/gal.: 7.83 Specific Gravity @ 15.6/15.6°C: 0.94 Viscosity @ 100°C, cSt: 590 Flash Point, °C (PMCC): 150 min. Nitrogen, % wt.: 1.57 Boron, % wt.: 0.77 Demonstrated performance in the most severe gasoline oil tests Excellent soot dispersancy in low speed, high load diesel tests

HiTEC® 646

High performance ashless dispersant additive to hold hydrocarbon and inorganic particulates in suspension.

HiTEC® 646 is an ashless dispersant for formulating a variety of crankcase oils for gasoline, diesel and marine diesel engines. Also suitable for formulating oils for two-stroke engines. Appearance: Dark brown viscous liquid Density, lbs/gal.: 7.72 Viscosity @ 100°C, cSt: 420 Specific Gravity @ 15.6/15.6°C: 0.927 Flash Point, °C (PMCC): 150 min. Total Base Number, mg KOH/g: 42 Allows the formulation of performance lubricants meeting the highest crankcase oil specifications Provides excellent control of engine deposits under stop and go conditions Maintains optimum performance of process equipment, thus minimizing maintenance and energy costs

HiTEC® 672

Styrene/Maleic Ester pour point depressant in automotive and industrial lubricant formulating.

HiTEC® 672 is a styrene/maleic ester pour point depressant for use in motor oils, automotive and industrial gear lubricants, hydraulic fluids and lubricants where cold weather performance is critical. Appearance: Amber to Dark Brown Liquid Density, lbs./gal.: 7.52 Specific Gravity @ 15.6/15.6°C: 0.903 Viscosity @ 100°C, cSt: 110 Pour Point, °C: -23 max. Maximum pour point depression in a wide range of base stocks Extensively field tested and proven Particularly effective in gear oils using high level of bright stock base oil Wide range of industrial and automotive applications Typical dosages of HiTEC® 672 vary between 0.025%wt and 0.5%wt for most engine oil uses and will range from 0.1%wt to 2.0%wt for automotive gear oil formulations

HiTEC® 686

Calcium phosphonate/phenate based detergent additive for automotive lubricant formulating.

HiTEC® 686 is a calcium phosphonate/phenate based detergent additive that provides high temperature detergency and deposit control in a variety of both gasoline and diesel automotive applications. Appearance: Dark brown viscous liquid Density, lbs/gal.: 7.87 Specific Gravity @ 15.6/15.6°C: 0.945 Viscosity @ 100°C, cSt: 38 TBN, mg KOH/g: 46 Flash Point, °C (PMCC): 100 min. Max Handling Temp: 70°C Shelf Life: 36 months @ ambient temperature High temperature detergency Excellent antioxidant performance

HiTEC® 7133

Friction modifier additive for formulating crankcase oils where fuel economy is required.

HiTEC® 7133 is a friction modifier engineered to reduce the coefficient of friction between metal surfaces under dynamic conditions in crankcase oils. Appearance: Clear amber liquid Density, lbs/gal.: 7.91 Specific Gravity @ 25°/25°C: 0.95 Viscosity @ 100°C, cSt: 10 Metals, % wt.: 0 Nitrogen, % wt.: 0 Flash Point, °C (PMCC): 150 min Improves fuel economy Improves power and acceleration Reduces wear and extends engine life

HiTEC® 7188

Antioxidant additive for use in formulating automotive and industrial lubricants.

HiTEC® 7188 is a liquid antioxidant additive formulated for both automotive and lubricant formulations. Appearance: Dark red-brown liquid Density, lbs/gal.: 7.41 Specific Gravity @15.6/15.6 C: 0.89 Viscosity at 40°C, cSt: 10-20 Flash Point, °C (PMCC): 150 min. BS&W: 0.05 max. Color, ASTM 1500 DD: 7.0 max. Sulfur, % wt.: 11.7 - 13.7 Max Handling Temp: 55°C (<24 hrs) Shelf Life: 24 months @ 5°C min: 30°C max. Liquid antioxidant Ashless performance

HiTEC® 7197

ZDDP Antiwear/EP additive for gasoline or diesel engine oils.

HiTEC® 7197 is a ZDDP (Zinc Dialkyl Dithiophosphate) antioxidant additive with secondary corrosion inhibition for use in formulating gasoline or diesel engine oils as well as a variety of industrial lubricants. Appearance: Clear yellow-green to brown oily liquid. Density, lbs/gal.: 9.33 Specific Gravity @ 15.6/15.6°C: 1.12 Viscosity @ 100°C, cSt: 11.0 Flash Point, °C (PMCC): 110 min. Phosphorus, % wt.: 8.0 Zinc, % wt.: 9.0 Max Handling Temp: (<24 hrs): 55°C Shelf Life: 30 months @ ambient (10-35°C) High thermal stability All primary alkyl Excellent antioxidant performance Dosage rates for the HiTEC 7197 will vary depending on desire performance and application, but typical treat rates range between 0.6%wt and 1.6%wt.

HiTEC® 7389

Multipurpose thickener for use in formulating a variety of automotive and industrial oils. Cost effective alternative to 40 & 100 cSt PAO.

HiTEC® 7389 is a multipurpose shear-stable thickener for use in formulating a wide range of industrial and automotive oils. HiTEC® 7389 offers a cost effective alternate to the use of PAO (40 and 100 cSt). Appearance: Faint yellow viscous liquid Density, lbs/gal.: 7.50 Specific Gravity @ 15.6/15.6°C: 0.9007 Viscosity @ 100°C, cSt: 176 Flash Point, °C (PMCC): 170 min. Pour Point, °C: -18 max. Max Handling Temp: 100°C Shelf Life: 24 months @ 60-90°C Excellent handling properties Excellent compatibility with variety of base oils Contains seal swell additives MIL-PRF-2105E Approved Contains pour point depressant Very shear stable Treat rates of the HiTEC® 7389 will vary by application and base stock but can be used in formulas up to 60%wt.

HiTEC® 8703

Premium off-road additive for universal tractor transmission oil (UTTO) and tractor hydraulic fluid (THF).

HiTEC® 8703 is a premium off-road additive technology designed for Universal Tractor Transmission Oil (UTTO) or Tractor Hydraulic Fluid (THF) oils. The HiTEC® 8703 is engineered with a blend of detergency and friction modifiers to impart a clean operating and friction stable fluid. Appearance: Clear dark brown viscous liquid Density, lbs/gal.: 8.46 Specific Gravity @ 15.6/15.6°C: 1.016 Viscosity @ 100°C, cSt: 20 Flash Point, °C (PMCC): 120 min. Max Handling Temp: 60°C Shelf Life: 24 months @ 40-45°C Superior friction durability Advanced final drive performance Superior pump wear protection Excellent cleanliness Proven field performance

HiTEC® 8888F

Multifunctional additive package for use in off road transmission, drivetrain, and hydraulic fluids.

HiTEC® 8888F is a premium off-road additive package engineered for off-road applications that require a high degree of static friction. HiTEC® 8888F has proven field test results of industry leading load-carrying capability, making the 8888F the premier choice for heavy duty machine fluids. Appearance: Hazy dark brown viscous liquid Density at 15°C, g/ml: 1.025 Density, lbs/gal: 8.55 Specific Gravity at 15.6/15.6°C: 1.027 Kinematic Viscosity at 100˚C, mm²/s: 36 Flash Point, °C (PMCC): 120 min Max Handling Temp: (<24 hours) 70°C Shelf Life: 24 months at ambient temperature, 3 months at 50°C Industry leading friction performance Superior wear protection and load carrying capabilities Outstanding yellow metal protection

HiTEC® 9595

PCMO additive package for formulating oils to meet ILSAC GF-5 and API SN industry specifications.

HiTEC® 9595 is an additive package engineered to formulate passenger car motor oils that meet ILSAC GF-5 and API SN specifications. The HiTEC® 9595 is designed for use with the OCP VII HiTEC® 5751 to optimize SAE 5W-30 and 10W-30 blends. Appearance: Dark brown liquid Density, lbs/gal.: 8.12 Specific Gravity @ 15.6/15.6°C: 0.975 Viscosity @ 100°C, cSt: 79 Flash Point, °C (PMCC): 135 min. Calcium, %M: 2.24 Nitrogen, %M: 0.99 Molybdenum, ppm: 465 Phosphorus, %M: 0.91 Zinc, %M: 1.00 TBN, mKOH/g: 81 Max Handling Temp: 70°C Shelf Life: 3 months @ 50°C, 36 months @ ambient (10-40°C) Optimized treat-rate product meeting the latest ILSAC GF-5 specification in SAE 5W-30 & 10W-30 grades. Fully meets the license requirements of API SN resource conserving for these grades. Treat rates for HiTEC® 9595 will vary upon base oil selection. For specific formulation recommendations, please reach out to your ChemPoint representative.

iso-Pentane 99 Pure

A high-purity hydrocarbon also known as 2-methylbutane; commonly used as a process medium for polypropylene and polyethylene manufacturing as well as in personal care applications.

Molecular weight: 72.1 Density: 620 Boiling Point: 27.8 Solidification Point: -160.0°C Refractive Index: 1.3450 Flash Point: <-35 Specific Heat: 2.258 Heat of Vaporization: 339.0 Vapor Pressure: 91.74 Surface Tension: 15.0 Kinematic Viscosity: 0.36

Lithium Stearate 304

Designed to satisfy hydrocarbon and synthetic lubricant-based greases.

The lithium salt of distilled, hydrogenated fatty acids from animals or vegetables. ALKALINITY %: 0.00-0.15 FINENESS - THRU 200 MESH %: 99.00-100.00 FINENESS - THRU 40 MESH %: 100.00-100.01 LITHIUM CONTENT %: 2.40-2.60 WAP24A WATER %: 0.00-2.00 Polymeric coatings Zinc-silicone dioxide coatings Sealing gaskets for food containers Safe in articles that are in contact with food Can be used as a strong binder in certain makeup such as eye shadow, blushes, and other cosmetics. This can also be used as a lubricant in high temperatures.

Lithium Stearate 306

LS #306 is designed for lubricant-based greases, specifically around food processing. Slightly more acidic than #304.

Lithium Stearate is distilled from animal and vegetable sources. Appearance: White powder Melting Point: 212 °C / 414 °F Solubility in Water: Insoluble Molecular Weight: 290.42 g Safe with food processing Meet synthetic lubricant-based grease requirements Can be in paper components touching food Used in various makeup products such as eye shadow, blush, etc. Also good for use in contact with processing food in paper or cardboard.

Lithium Stearate PM

A distilled salt from fatty acids specifically used in grease and great for binding materials together.

Lithium Stearate is the salt distilled from fatty acids of animal or vegetable sources. Appearance: White powder Melting Point: >200 °C Molar Mass: 306.42 g/mol Insoluble in H20 Safe with food processing Meet synthetic lubricant-based grease requirements Can be in paper components touching food Used as a lubricant in industrial applications such as motor vehicles, aircraft, heavy machinery, etc.

Methylcyclohexane 99 Pure

A high-density, high purity hydrocarbon also known as Toluene Hexahydride. It is commonly used in coating formulations, organic synthesis and chromatographic analysis.

Haltermann Carless Methylcyclohexane 99 Pure is an ultra-pure hydrocarbon ideal for highly specialized applications. Methycyclohexane 99 Pure can be used as laboratory reagents or solvents where impurities are prohibited. Molecular weight: 98.2 Density: 769 Boiling point: 100.9 Solidification point: -126.2°C Refractive index: 1.4231 Flash point: -4 Specific heat: 1.875 Heat of vaporization: 323.2 Vapor pressure: 6.18 Surface tension: 23.8 Kinematic viscosity: 0.95

Microthene® FA 700-00

20 micron high density polyethylene powder with a melt index of 10.

Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FA 709-00

20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FN 501-00

20 micron low density polyethylene powder with a melt index of 23.

Microthene FN 501-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 501-00 has the highest melt index of all the Microthene grades. Melt index: 23 g/10 min Density: 0.9245 g/cc Vicat softening point: 92.0°C/197.6°F Peak melting point: 114.5°C/238.1°F Low temperature brittleness: -50.0°C/-58.0°F Tensile strength @ break: 13.1/1,900 MPa/psi Elongation @ break: 120% Flexural modulus: 310.3/45,000 MPa/psi Hardness, Shore D: 54 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

N-DODECYL MERCAPTAN

N-Dodecyl Mercaptan is used in lubricant intermediate to produce additives and final components. At the same time is it also used for polymers and rubber applications.

N-Dodecyl Mercaptan is used in lubricant intermediates to produce additives as well as final components to improve lubricant performance in base oils and metal working fluids. Moreover Normal Dodecyl Mercaptan ( 1-dodecanethiol, lauryl mercaptan, NDDM) is used as reactants in the synthesis of antioxidants, which minimize undesirable effects from processes such as the stabilization of tin. CAS # 112-55-0 Physical state : Liquid Color : Colorless Odor : Repulsive Flash point : 133 °C Oxidizing properties : no Autoignition temperature : 230 °C Molecular formula : C12H26S Molecular weight : 202,44 g/mol pH : Not applicable Boiling point/boiling range : 270 °C Vapor pressure : 0,00 mbar at 25 °C Water solubility : 0,0054 mg/l Method: OECD Test Guideline 105 Viscosity, dynamic : 2,98 cP at 25 °C Relative vapor density : 1 (Air = 1.0) - Lubricant Additive, Pharmaceutical Additives, Antioxidant Intermediates, Polymer Modifiers

n-Hexane 95 Tech

fuel additive.

A technical grade high-purity hydrocarbon with a wide variety of applications. It can be used as a solvent for varnishes, coatings or adhesives in the printing industry. Other common uses are as an intermediate in laboratory chemicals or as a...

Haltermann Carless n-Hexane 95 Tech is a high purity hydrocarbon ideal for a variety of laboratory & specialized production processes. N-Hexane 95 Tech is suitable as a process medium for polymer production for multiple different rubber types. Color: <5 Density: 665 Distillation Range: 68-70 Evaporation Rate: 1.5 Refractive Index: 1.375 Aniline Point: 68 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: <-20°C Vapor Pressure: 12.5 Kinetic Viscosity: 0.47

n-Nonane 95 Tech

A technical grade high-purity hydrocarbon suitable for crystallization, extraction, HPLC and SMB chromatography processes. This aliphatic solvent is also highly recommended for plastic foams.

Color: <5 Density: 723 Distillation Range: 150-154 Evaporation Rate: 24 Refractive Index: 1.405 Aniline Point: 74 Aromatic Content: <0.03 Non-volatile Matter: <5 Flash Point: +30°C Vapor Pressure: 0.38 Kinetic Viscosity: 0.96

n-Nonane 99 Pure

A pure grade high-purity hydrocarbon used in organic synthesis and as a solvent in biodegradable detergents. This hydrocarbon is also an active ingredient in most varnishes, paints and security printing inks.

Molecular weight: 128.3 Density: 718 Boiling point: 150.8 Solidification point: -53.5°C Refractive index: 1.4054 Flash point: +31°C Specific heat: 2.108 Heat of vaporization: 286.5 Vapor pressure: 0.66 at 25°C Surface tension: 22.9 Kinematic viscosity: 1.00

n-Octane 95 Tech

A technical grade high-purity hydrocarbon typically used in industrial, coating, polymer and pharmaceutical applications.

Haltermann Carless N-Octane 95 Technical Grade is an ideal solvent for a variety of industrial processes including Pharmaceutical grade extractions & laboratory testing. Color: <5 Density: 708 Distillation Range: 124-127 Evaporation Rate: 8.0 Refractive Index: 1.398 Aniline Point: 73 Aromatic Content: <0.01 Non-volatile Matter: <5 Flash Point: +12°C Vapor Pressure: 1.3 Kinetic Viscosity: 0.74

n-Octane 99 Pure

A pure grade high-purity hydrocarbon and one of the standard values in octane rating scale. It is also used as an anti-knock agent for high compression engine fuels, lacquer diluents and a blowing agent for foam rubber.

Molecular weight: 114.2 Density: 705 Boiling point: 125.7 Solidification point: -56.8°C Refractive index: 1.3975 Flash point: +12°C Specific heat: 2.196 Heat of vaporization: 301.1 Vapor pressure: 2.00 at 25°C Surface tension: 21.8 Kinematic viscosity: 0.78

n-Pentane 95% Tech

A technical grade hydrocarbon commonly used for prep laboratory work and cleaning purposes. It can also be used as a blowing agent for styrenic foams and as a refrigerant.

Color: <5 Density: 631 Distillation Range: 36-38 Evaporation Rate: 1.0 Refractive Index: 1.358 Aniline Point: 69 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 40.9 Kinetic Viscosity: 0.39

NPG 90

Consisting of 90% NPG, and 10% water, this glycol offers a balance of hardness &amp; flexibility characteristics, as well as excellent thermal stability.

Eastman NPG™ 90 glycol is a liquid at above 38°C to form high quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It is also used as an intermediate to formulate synthetic lubricants. In the U.S., NPG can legally be used for food contact coating applications under federal food additive regulations. Appearance @ 38°C (100°F): Liquid Appearance @ 150°C (77°F): Slurry Crystallization point: 31°C (88°F) Flash point: 132°C (270°F) Boiling point: 100-121°C (212-250°F) Specific gravity @ 60°C: 0.94 CAS: 126-30-7 (90%) CAS: 7732-18-5 (10%) Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.

n-Undecane 95 Tech

A high-purity hydrocarbon with physical and chemical properties similar to lower n-paraffins. This hydrocarbon is commonly used as a solvent in special applications such as home fragrances and security inks.

Color: <10 Density: 744 Distillation Range: 193-198 Refractive Index: 1.417 Aniline Point: 80 Aromatic Content: <0.1 Non-volatile Matter: <5 Flash Point: +67°C Vapor Pressure: 0.04 Kinetic Viscosity: 1.46

Sodium PYRION™ 40%

Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

Soltrol® 10

Soltrol® 10 is a low aromatic, isoparaffinic solvent with a boiling point of 217°F and a vapor pressure of 114 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 204°F Final Boiling Point: 217°F Flash Point: 13°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 110 Vapor Pressure at 100°F mmHg: 114 Aniline Point: 171°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 100

Soltrol® 100 is a low aromatic, isoparaffinic solvent with a boiling point of 347°F and a vapor pressure of 6.18 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 316°F Final Boiling Point: 347°F Flash Point: 104°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 141 Vapor Pressure at 100°F mmHg: 6.18 Aniline Point: 181°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 125

Soltrol® 125 is a low aromatic, isoparaffinic solvent with a boiling point of 365°F and a vapor pressure of 2.86 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 342°F Final Boiling Point: 365°F Flash Point: 122°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 154 Vapor Pressure at 100°F, mmHg: 2.86 Aniline Point: 184°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 130

Soltrol® 100 is a low aromatic, isoparaffinic solvent with a boiling point of 405°F and a vapor pressure of 2.57 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 370°F Final Boiling Point: 405°F Flash Point: 144°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 165 Vapor Pressure at 100°F mmHg: 2.57 Aniline Point: 188°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 170

Soltrol® 170 is a low aromatic, isoparaffinic solvent with a boiling point of 190°F and a vapor pressure of 0.7 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 429°F Final Boiling Point: 470°F Flash Point: 190°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 188 Vapor Pressure at 100°F, mmHg: 0.7 Aniline Point: 196°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 220

Soltrol® 220 is a low aromatic, isoparaffinic solvent with a boiling point of 556°F and a vapor pressure of 0.36 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 480°F Final Boiling Point: 556°F Flash Point: 233°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 197 Vapor Pressure at 100°F, mmHg: 0.36 Aniline Point: 196°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

TBPS 454

TBPS 454 is a sulfiding agent siilar to DMDS and DMS but is not classified as a flammable material

TBPS 454 is di-tertiary butyl polysulfide, a mixture with a predominance of tetra and penta-sulfides. It is not a distilled material and has the highest sulfur content polysulfide being manufactured Color, Visible : Yellow Mercaptan Sulfur : 35.9 Sulfur : 53.3 Turbidity : 1.58 Boiling Point at 1 atm (14.7 psia) : Decomposes Density @ 20 C : 1.090 Flash Point, PM : > 149 Insuluble in : Water Molecular Weight, g/mol : 242 Soluble in : Hexane, white spirits Viscosity @ 20C, cP : 10 Low toxicity Non-flammable

TBPS 454 EMEA

Tertiary-Butyl Polysulfide 454 is a sulfiding agent used to transform metal oxide species to a metallic sulfide crystalline phase in situ for hydrotreating catalyts CAS N: 68937-96-2

Tertiary-Butyl Polysulfide 454 is a sulfiding agent used for refinery applications and as final components to improve lubricant performance in base oils and metal working fluids. Tert-Butyl Polysulfide is not a distilled material. It is the highest sulfur content polysulfide manufactured used in Automotive and transportation industry. CAS N: 68937-96-2 Synonyms: Tertiary-Butyl Polysulfide di-t-Butyl Polysulfide tert-Butyl Polysulfide Polysulfides, di-tert-Butyl Form : Liquid Physical state : Liquid Color : Yellow Odor : Mild, sweet Flash point : 103 °C (217 °F) Method: ASTM D 93 Oxidizing properties : No Autoignition temperature : 225 °C at 1,005.20 1,009.40 hPa Thermal decomposition : 144 °C Molecular formula : C8H18Sx (x = average of 4.0) Molecular weight : 242.5 g/mol pH : Not applicable Melting point/range : -11 °C at 103.25 hPa Boiling point/boiling range : 172 - 180 °C Vapor pressure : 15.60 Pa at 20 °C Density : 1.0697 G/ML at 20 °C Water solubility : Insoluble Partition coefficient: noctanol/water: log Pow: 5.6 Solubility in other solvents : Soluble in hexane and white spirits. Viscosity, dynamic : 10 cP at 20 °C Relative vapor density : 1 (Air = 1.0) Percent volatile : > 99 % Di-Tert-Butyl Polysulfide, offers a variety of benefits that differs from other sulfiding agents. Not classified as a flammable material It has a low toxicity rating Friendly and common smell for refineries. Starts to convert to H2S at the lowest temperature compared to other sulfiding agents The hydrocarbon byproduct during a sulfiding operation for TBPS454 is isobutane Automotive & Transportation Refinery Applications

TMPD Platelets

Solid, white irregularly shaped platelets at room temperature. Also available in molten form for easier handling when heated to 115°F.

Eastman TMPD™ platelets is a white, waxy solid used to formulate coatings and unsaturated polyester laminating resins. TMPD™ is ideal for formulating high solids and low VOC coatings. Appearance (molten): Clear, clean liquid Molecular weight: 146.22 Melting point: 46-55°C (114.8-131°F) Crystallization point: 31°C (88°F) Flash point: 113°C (235°F) Boiling point @ 760 mm Hg: 220-235°C (428-455°F) Specific gravity @ 55°C/15°C: 0.928 CAS: 144-19-4 Very stable in waterborne polyester formulations Excellent chemical, stain, and humidity resistance Low viscosity and density allowing excellent solubility in solvents Outstanding corrosion resistance in fiberglass-reinforced plastic applications Used to formulate liquid coatings for metal office furniture, automotive, industrial maintenance, and general metal applications. Other applications include detergent additive, hard surface cleaner, plasticizer intermediate, and synthetic lubricants.

TNPS 537

TNPS 537 is a sulfiding agent similar to the DMS and DMDS. It is commonly used in the activation of hydrotreating catalysts

TNPS 537is also known as Di-tert-nonyl Polysulfide or TPS 37. It is typically used in automotive, petroleum and refinery applications Appearance : Clear with no particulate matter Color, Visible : Light yellow Flash Point, PM : 229 Gardner Color : 5.8 Mercaptan Sulfur : 12.9 Sulfur : 36.1 Turbidity : 2.62 Active Sulfur, WT % : 22 - 26 Boiling Point @ 14.7 psia,,deg F : Decomposes Density @ 20 C : 1.036 Insoluble in : Water Molecular Weight, g/mol (main constituent) : 414 Odor : Mild Soluble in : Hexane, toluene, white spirit Viscosity @ 40C : 35