There are no products found that meet this criteria.

• 

  3M™ PF-5058

  A blend of clear, colorless, fullyfluorinated liquids that is chemically and thermally stable, practically non-toxic and nonflammable. Has a boiling point of 80°C - 100°C.

  Ideal solvent for depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges. Slower evaporation rate is useful for deep-draw and cold-rolling lubricant formulations. Is a clear, colorless, fully-fluorinated liquid. PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. (b.p 80-100C) Appearance: Clear, colorless Boiling Point (101 kPa): 80°C – 100 °C Liquid Density: 1.75 g/ml Kinematic Viscosity: 0.9 centistokes Water Solubility: < 15 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive An effective alternative to chlorofluorocarbons (CFCs) in a wide range of applications, from lubricant deposition to process solvent applications.

  Manufacturer: 3M | Product Line: 3M™ Performance Fluids | Package Sizes: 11lb Bottle, 44lb Jug, 750lb Drum

• 

  3M™ PF-5060

  A clear, colorless, fully-fluorinated liquid that is chemically and thermally stable, practically non-toxic, and nonflammable. Has a boiling point of 56°C.

  High dielectric strength, excellent material compatibility, along with chemical thermal stability makes fluid useful in applications such as lubricant deposition and reaction media. Appearance: Clear, colorless Average Molecular Weight: 338 Boiling Point (1 atm): 56°C Pour Point: -90°C Estimated Critical Temperature: 451 K Estimated Critical Pressure: 1.83 x 106 Pa Vapor Pressure: 30.9 x 103 Pa Latent Heat of Vaporization (at normal boiling point): 88 J/g Liquid Density: 1.68 g/ml Kinematic Viscosity: 0.38 centistokes Absolute Viscosity: 0.64 centipoise Liquid Specific Heat: 1.05 J g-1 °C--1 Liquid Thermal Conductivity: 0.057 W m-1 °C-1 Coefficient of Expansion: 0.0016 °C-1 Surface Tension: 12 dynes/cm Refractive Index: 1.249 Water Solubility: 10 ppmw Solubility in Water: <5ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Used in a wide range of applications, such as lubricant deposition, reaction media and heat transfer.

  Manufacturer: 3M | Product Line: 3M™ Performance Fluids | Package Sizes: 14lb Bottle, 44lb Pail, 750lb Drum

• 

  DOWFROST™ Copper Inhibitor

  An azole based inhibitor designed to boost the anti-corrosion properties.

  Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Yellow to amber Odor: Characteristic pH: 13.0 - 13.7 Measured Freezing point: -8 °C ( 18 °F) Literature Boiling point (760 mmHg): 100 °C ( 212 °F) Evaporation Rate (Butyl Acetate = 1): <0.8 Estimated. Vapor Pressure: 23 mmHg at 25 °C (77 °F) Literature Relative Vapor Density (air = 1): Same as water Relative Density (water = 1): 1.19 at 20 °C (68 °F) / 20 °C Literature Water solubility: Soluble in water Partition coefficient: n-octanol/water log Pow: 1.71 Estimated. Anti-corrosion inhibitor Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

  Manufacturer: Dow | Product Line: Dowfrost™ Glycol Thermal Fluids | Package Sizes: 5.5gl Pail, 55gl Drum

• 

  DOWFROST™ Iron Inhibitor

  A phosphate and azole based inhibitor designed to boost the anti-corrosion properties.

  Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Colorless to yellow Odor: Characteristic pH: 10.5 Literature Freezing point: -7 °C ( 19 °F) Estimated. Boiling point (760 mmHg): 108 °C ( 226 °F) Flash point: closed cup No test data available Evaporation Rate (Butyl Acetate= 1): < 0.5 Estimated. Vapor Pressure: 10 mmHg at 25 °C (77 °F) Relative Vapor Density (air = 1): 1 Relative Density (water = 1): 1.48 Water solubility: completely miscible with water Anti-corrosion inhibitor Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

  Manufacturer: Dow | Product Line: Dowfrost™ Glycol Thermal Fluids | Package Sizes: 55gl Drum, 5gl Pail

• 

  DOWFROST™ pH Booster

  A heat transfer inhibitor designed for pH adjustments.

  Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Colorless pH: 12 Freezing point: -29 °C ( -20 °F) Literature Boiling point (760 mmHg): 137.78 °C ( 280.00 °F) L Evaporation Rate (Butyl Acetate= 1): <0.5 Vapor Pressure: 26 mmHg Relative Vapor Density (air = 1): >1 Relative Density (water = 1): 1.45 Water solubility 100 % Kinematic Viscosity: 4.3 cSt at 20 °C (68 °F) Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

  Manufacturer: Dow | Product Line: Dowfrost™ Glycol Thermal Fluids | Package Sizes: 1gl Can, 5gl Pail

• 

  Krytox™ 143AB Oil

  Krytox™ 143AB Oil has a viscosity of 78 cSt @ 40°C.

  Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AB Oil has a viscosity of 78 cSt @ 40 degees C. Average MW: 3800 Viscosity @40C: 78 Viscosity Index: 113 Pour Point °C: -40 Density @0°C (32°F): 1.93 Vapor Pressure (torr) @38°C (100°F): 5 x 10(–6) Estimated Useful Range °C: –40–232

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 1kg Bottle

• 

  Krytox™ 143AC Oil

  Krytox™ 143AC Oil has a viscosity of 243 cSt @ 40°C.

  Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AC Oil has a viscosity of 243 cSt @ 40 degrees C. Average MW: 5940 Viscosity @40C: 243 Viscosity Index: 134 Pour Point °C: -35 Density @0°C (32°F): 1.95 Vapor Pressure (torr) @38°C (100°F): 8 x 10(–8) Estimated Useful Range °C: –34–288

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 1kg Bottle

• 

  Krytox™ 143AD Oil

  Krytox™ 143AD Oil has a viscosity of 450 cSt @ 40°C.

  Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AD Oil has a viscosity of 450 cSt @ 40 degrees C. Average MW: 7480 Viscosity @40C: 450 Viscosity Index: 146 Pour Point °C: -35 Density @0°C (32°F): 1.95 Vapor Pressure (torr) @38°C (100°F): 6 x 10(–9) Estimated Useful Range °C: –29–316

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 1kg Bottle

• 

  Krytox™ 143AZ Oil

  Krytox™ 143AZ Oil has a viscosity of 22.8 cSt @ 40°C.

  Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AZ Oil has a viscosity of 22.8 cSt @ 40 degrees C. Average MW: 2060 Viscosity @40C: 22.8 Viscosity Index: 60 Pour Point °C: -55 Density @0°C (32°F): 1.91 Vapor Pressure (torr) @38°C (100°F): 4 x 10(–4) Estimated Useful Range °C: –57–149

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle

• 

  Krytox™ 240AA Grease

  Low viscosity PFPE based grease thickened with high quality PTFE.

  Krytox™ 240AA is a white buttery grease with all of the same properties as the 143 series base oils. This grease is pure white fluorinated synthetic material, which is nonreactive, nonflammable, safe in chemical and oxygen service, and are long-lasting. Viscosity (cSt): @20°C (68°F): 88 @ 38°C (100°F): 35 @ 99°C (210°F): 5.4 @ 204°C (400°F): 1.3 Vapor Pressure of Base Oil: @ 38°C (100°F): 1 x 10 e -4 @ 260°C (500°F): 0.8 Volatility of Base Oil (wt% loss in 22 hr.): @ 149°C (300°F): 15 Pour Point of Base Oil: -50°C (-60°F) Texture: Buttery NLGI Grade: 2 Mechanical Stability (ASTM D217 10,000 and 100,000 strokes): No change Oxidation Stability @ 99°C (210° F): 0 psig pressure drop after 600 hr Liquid Oxygen Impact (ASTM D2512, NASA MSFC 106B): Pass Grease Density (at 25°C/77°F): 1.91 g/mL Oil Separation (wt% loss in 30 hours): @ 99°C (210°F): 5 @ 204°C (400°F): 20 Estimated Useful Range: -51°C to 177°C (-60°F to 350°F) Low viscosity Non-flammable Precise performance Low outgassing Seals, O-rings, gaskets, low temperature bearings

  Manufacturer: Chemours | Product Line: Krytox™ Greases | Package Sizes: 2oz Tube

• 

  Krytox™ 240AB Grease

  Low to medium viscosity PFPE based grease thickened with PTFE . Meets MIL-PRF-27617 Type II.

  Krytox™ 240AB is a white buttery grease formulated from clear, colorless, fluorinated synthetic oils that are nonreactive, nonflammable, safe in chemical and oxygen service, and are long-lasting. Meets MIL-PRF-27617 Type II and NATO G-398 Viscosity (cSt): @20°C (68°F): 240 @ 38°C (100°F): 86 @ 99°C (210°F): 10.5 @ 204°C (400°F): 2.1 Vapor Pressure of Base Oil: @ 38°C (100°F): 5 x 10 e -6 @ 260°C (500°F): 3 x 10 e -2 Volatility of Base Oil (wt% loss in 22 hr.): @ 149°C (300°F): 1.9 @ 204°C (400°F): 17.3 @ 260°C (500°F): 76.2 Pour Point of Base Oil: -40°C (-40°F) Texture: Buttery NLGI Grade: 2 Mechanical Stability (ASTM D217 10,000 and 100,000 strokes): No change Oxidation Stability @ 99°C (210° F): 0 psig pressure drop after 600 hr Liquid Oxygen Impact (ASTM D2512, NASA MSFC 106B): Pass Grease Density (at 25°C/77°F): 1.92 g/mL Oil Separation (wt% loss in 30 hours): @ 99°C (210°F): 4 @ 204°C (400°F): 12 Estimated Useful Range: -40°C to 232°C (-40°F to 450°F) Qualification Reference Number: AFPET/PTP 08-012 MIL-Spec: MIL-PRF-27617 Tyler 2 NATO Number: G-398 Change in Worked Penetration: +3 Corrosion on Copper (2b max): 1b High Temperature Bearing Performance (500 hr min at 10,000 rpm, 204°C): Stopped at 1,320 hr Evaporation % (ASTM D-2595): 10.1 Solubility in Fuel (%): 0.3 Water Washout Characteristics (%): 0.25 Dirt Count: 75 micron and larger: 0 25-75 micron: 0 Resistance to Aqueous Solution: Distilled Water: Pass 50/50 Distilled Water/Ethanol: Pass Film Stability and Corrosion on Steel: Pass Meets MIL-PRF-27617 Type II Meets NATO G-398 Low to medium viscosity Low outgassing Non-flammable Broad temperature performance NSF H-1 food grade Bearings, control switches, gauges, quick connectors, o-rings, gaskets, and seals

  Manufacturer: Chemours | Product Line: Krytox™ Greases | Package Sizes: 0.5kg Jar, 0.5oz Tube, 2oz Tube, 8oz Tube

• 

  Krytox™ 240AC Grease

  MIL-PRF 27617 Type III Grease, based on pure PFPE oil and high efficiency PTFE Thickener.

  Krytox™ 240AC is a white buttery grease that is nonreactive, nonflammable, safe in chemical and oxygen service, and is extremely long-lasting. Meets MIL-PRF-27617 Type III. Viscosity (cSt): @20°C (68°F): 800 @ 38°C (100°F): 270 @ 99°C (210°F): 26 @ 204°C (400°F): 4.1 Vapor Pressure of Base Oil: @ 38°C (100°F): 8 x 10 e -8 @ 260°C (500°F): 2 x 10 e -3 Volatility of Base Oil (wt% loss in 22 hr.): @ 149°C (300°F): 0 @ 204°C (400°F): <1 @ 260°C (500°F): 4 Pour Point of Base Oil: -35°C (-30°F) Texture: Buttery NLGI Grade: 2 Mechanical Stability (ASTM D217 10,000 and 100,000 strokes): No change Oxidation Stability @ 99°C (210° F): 0 psig pressure drop after 600 hr Liquid Oxygen Impact (ASTM D2512, NASA MSFC 106B): Pass Grease Density (at 25°C/77°F): 1.93 g/mL Oil Separation (wt% loss in 30 hours): @ 99°C (210°F): 3 @ 204°C (400°F): 11 Estimated Useful Range: -34°C to 288°C (-30°F to 550°F) Qualification Reference Number: AFPET/PTP 08-012 MIL-Spec: MIL-PRF-27617 Tyler 2 NATO Number: G-398 Change in Worked Penetration: +3 Corrosion on Copper (2b max): 1b High Temperature Bearing Performance (500 hr min at 10,000 rpm, 204°C): Stopped at 1,320 hr Evaporation % (ASTM D-2595): 10.1 Solubility in Fuel (%): 0.3 Water Washout Characteristics (%): 0.25 Dirt Count: 75 micron and larger: 0 25-75 micron: 0 Resistance to Aqueous Solution: Distilled Water: Pass 50/50 Distilled Water/Ethanol: Pass Film Stability and Corrosion on Steel: Pass Chemically Inert Broad temperature performance Low out-gassing Non-flammable Meets the following specifications: MIL-PRF-27617 Type III Nato # G-399 NSF H-1 Food Grade -National Stock Numbers (NSN): 9150-01-008-0495 9150-00-961-8995 9150-01-543-2899 9150-12-307-2645 9150-12-338-4838 9150-99-784-3607 9150-12-349-5329 9150-00-083-5589 9150-00-726-3553 Bearings, gears, seals, o-rings, gauges, valves, gaskets, and quick connectors

  Manufacturer: Chemours | Product Line: Krytox™ Greases | Package Sizes: 0.5kg Jar, 0.8kg Cartridge, 1kg Jar, 20kg Pail, 2oz Tube, 5kg Pail, 7kg Pail, 8oz Tube

• 

  Krytox™ 4442 Oil

  Krytox™ 4442 Oil has been blended for use in colder ambient conditions.

  Krytox™ 4442 Oil has been blended for use in cold to warm ambient conditions. If the application is to be run continuously at high temperatures, the use of standard Krytox™ GPL100 Series of Oils is recommended. This oil has a viscosity of 50 cSt @40°C Performs well in colder temperature applications.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 1kg Bottle

• 

  Krytox™ GPL101 Oil

  Krytox™ GPL101 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -70°C to 104°C.

  Krytox™ GPL101 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL101 has a viscosity of 7.8 cSt @40°C. This grease is suitable to use in applications up to 104°C. ISO Grade: 7 Estimated Useful Range: -70°C to 104°C Oil Viscosity @40°C: 7.8 Oil Pour Point: -70°C Oil Density, g/ml @0°C: 1.89 Maximum Oil Volatility, % in 22 hr @121°C: 75 Oil Separation, wt loss, % in 30 hr @99°C: 9% Food Grade Compatible (H1): No Krytox™ GPL101 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 10kg Pail, 1kg Bottle, 20kg Pail, 5kg Bottle

• 

  Krytox™ GPL102 Oil

  Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -63°C to 132°C.

  Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL102 has a viscosity of 15 cSt @40°C. This grease is suitable to use in applications up to 132°C. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): No Krytox™ GPL102 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 10kg Pail, 1kg Bottle, 20kg Pail, 5kg Bottle

• 

  Krytox™ GPL103 Oil

  Krytox™ GPL103 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -60°C to 154°C.

  Krytox™ GPL103 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL103 has a viscosity of 30 cSt @40°C. This grease is suitable to use in applications up to 154°C. ISO Grade: 32 Estimated Useful Range: -60°C to 154°C Oil Viscosity @40°C: 30 Oil Viscosity Index: 92 Oil Pour Point: -60°C Oil Density, g/ml @0°C: 1.92 Maximum Oil Volatility, % in 22 hr @121°C: 7 Oil Separation, wt loss, % in 30 hr @99°C: 6% Food Grade Compatible (H1): No Krytox™ GPL103 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 1kg Bottle, 20kg Pail, 5kg Bottle

• 

  Krytox™ GPL105 Oil

  Krytox™ GPL105 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -36°C to 204°C. Krytox™ GPL105 Oil is food grade compatible (H1).

  Krytox™ GPL105 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL105 has a viscosity of 160 cSt @40°C. This grease is suitable to use in applications up to 204°C. Krytox™ GPL105 Oil is Food Grade Compatible (H1), ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): Yes Krytox™ GPL105 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 0.5oz Bottle, 1kg Bottle, 20kg Pail, 5kg Bottle

• 

  Krytox™ GPL106 Oil

  Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -36°C to 260°C.

  Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL106 has a viscosity of 243 cSt @40°C. This grease is suitable to use in applications up to 260°C. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No Krytox™ GPL106 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 1kg Bottle, 5kg Bottle

• 

  Krytox™ GPL255 Grease

  Krytox™ GPL255 grease is a special product with fluorescing agent.

  Krytox™ GPL255 grease is a special product with fluorescing agent in it to allow the use of a black light to determine the uniformity of an application. It is not intended for routine application as lubricants without qualification testing. The fluorescing additive is present at low levels, but its effect on lubrication performance has not been tested. Base Oil Viscosity, cSt 20 °C (68 °F) = 550 40 °C (104 °F) = 160 100 °C (212 °F) = 18 NLGI Grade 2 Appearance - White and buttery Allows the use of a black light to determine the uniformity of an application. Use black like to uncover surface areas where grease coverage is absent. For applications requiring 100% surface coverage or for applications with surface areas intentionally excluded from being covered by grease. Under ultraviolet light, the products give off a yellowish green color that is visible to the unaided eye. The only equipment necessary is a standard broad spectrum ultraviolet lamp, commonly known as a “black light.” Lamps that emit long wave ultraviolet light in the 365 nm range are available from almost any industrial supply company.

  Manufacturer: Chemours | Product Line: Krytox™ Greases | Package Sizes: 0.5kg Jar

• 

  Krytox™ LVP Grease

  Krytox™ LVP is a high-vacuum grease.

  Krytox™ LVP is high-vacuum grease performs over extremes of temperature and pressure and used as a highly reliable, low-friction lubricant in aerospace and other projects. It has a viscosity of 740 cSt @ 40 degrees C.

  Manufacturer: Chemours | Product Line: Krytox™ Greases | Package Sizes: 0.5kg Jar, 0.5oz Tube, 0.8kg Cartridge, 1kg Jar, 2oz Tube, 5kg Pail, 8oz Tube

• 

  Krytox™ XP-1A2 Oil

  Krytox™ XP-1A2 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A2 Oil for extreme pressure performance has viscosity of 15 cSt @40°C.

  Krytox™ XP-1A2 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A2 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 15 Estimated Useful Temperature Range, °C: –63 to 132 Base Oil Viscosity cSt @40°C: 15 Oil Viscosity Index: 59 Pour Point °C: -63°C Food Contact Approval: None Krytox™ XP-1A2 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A2 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Jar

• 

  Krytox™ XP-1A4 Oil

  Krytox™ XP-1A4 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A4 Oil for extreme pressure performance has viscosity of 60 cSt @40°C.

  Krytox™ XP-1A4 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A4 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 68 Estimated Useful Temperature Range, °C: –51 to 179 Base Oil Viscosity cSt @40°C: 60 Oil Viscosity Index: 124 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A4 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A4 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

  Manufacturer: Chemours | Product Line: Krytox™ Oils

• 

  Krytox™ XP-1A6 Oil

  Krytox™ XP-1A6 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A6 Oil for extreme pressure performance has viscosity of 240 cSt @40°C.

  Krytox™ XP-1A6 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A6 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 220 Estimated Useful Temperature Range, °C: –36 to 182 Base Oil Viscosity cSt @40°C: 240 Oil Viscosity Index: 134 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A6 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A6 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 0.5kg Bottle, 20kg Pail, 5kg Bottle

• 

  Krytox™ XP-1A7 Oil

  Krytox™ XP-1A7 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A7 Oil for extreme pressure performance has viscosity of 440 cSt @40°C.

  Krytox™ XP-1A7 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A7 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 460 Estimated Useful Temperature Range, °C: –30 to 182 Base Oil Viscosity cSt @40°C: 440 Oil Viscosity Index: 155 Pour Point °C: -30°C Food Contact Approval: None Krytox™ XP-1A7 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A7 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

  Manufacturer: Chemours | Product Line: Krytox™ Oils | Package Sizes: 10kg Pail, 1kg Bottle, 1kg Bottle, 20kg Bottle, 5kg Bottle

• 

  Molykote™ 316 Silicone Release

  Silicone based release agent offering food certifications and commonly used in beverage and food manufacturing.

  Wide use release agent, Heat stable formulation that reduces sticking or gumming of applications while also providing lightweight lubrication. Product Type: Dispersion & aerosol Chemistry: Silicone Thickener: Silica High Temp: 199°C Low Temp: -40°C Color: Clear Hazmat: Yes Functional in a variety of industries and applications to reduce sticking and residue Meets FDA 21 CFR 175.300 Highly functional for a variety of industries and applications. Food and beverage - Reduce build-up & residue on heat seal bars, heating coils, cooking kettles - Helps prevent seizing - Helps release foods from trays and filling spouts, sugar from processing and packaging equipment, dried food from ovens and equipment Rotary letterpress printing - Metal release from tail sheets - Smoother employment of blades, saw tables, and trays - Reduces sticking on treated parts Bindery Flexography Textile Wood industry

  Manufacturer: DuPont | Product Line: Molykote™ Dispersions | Package Sizes: 12ea Bottle, 14.1kg Pail, 140kg Drum

• 

  Molykote™ 33 Extreme Low Temp, Bearing Grease, Light

  NLGI Grade 1 silicone based grease with a lithium thickener offering performance in extremely low temperatures and commonly used in freezer or cold room components.

  This light consistency grease has superior performance in extremely low temperatures and is widely used in applications that will be exposed to cold temperatures. Along with its resistance to moisture, corrosiveness, and oxidation, Molykote™ 33 Extreme Low Temperature Bearing Grease is ideal for equipment that must perform well in cold rooms and/or freezers. Product Type: Grease Chemistry: Silicone Base Oil Viscosity: 76 @ 40°C NLGI Grade: 1 Thickener: Lithium High Temp: 204°C Low Temp: -73°C Color: Off white Hazmat: No Performs in extremely low temperatures (-73°C to 180°C) Suitable for many plastics and elastomers Inert Light consistency Good shear Cold room/freezer equipment - Conveyors - Cart casters Plastic motors Meter readers

  Manufacturer: DuPont | Product Line: Molykote™ Greases | Package Sizes: 12ea Tube, 180kg Drum, 18kg Pail, 4ea Pail

• 

  Molykote™ 33 Extreme Low Temp, Bearing Grease, Medium

  NLGI 2 silicone based grease that is the same as Molykote™ 33 Extreme Low Temperature Bearing Grease, Light except that it is medium consistency.

  Medium consistency grease with excellent low temperature performance (-73°C to 180°C). Resistant to corrosion, moisture, and oxidation this grease is ideal for use in cold rooms, optical equipment, and other bearing applications. Product Type: Grease Chemistry: Silicone Base Oil Viscosity: 76 @ 40°C NLGI Grade: 2 Thickener: Lithium High Temp: 204°C Low Temp: -73°C Color: Off white Hazmat: No Performs in extremely low temperatures (-73°C to 180°C) Suitable for many plastics and elastomers Inert Light consistency Good shear Cold room/freezer equipment - Conveyors - Cart casters Optical equipment Low-torque instruments Plastic motors

  Manufacturer: DuPont | Product Line: Molykote™ Greases | Package Sizes: 10ea Cartridge, 12ea Tube, 180kg Drum, 18kg Pail, 4ea Pail, 55kg Drum

• 

  Novec™ 7700

  A non-flammable fluid with a low global warming potential for use in heat transfer applications.

  Designed for heat transfer applications for use in cooling of ion implanters, CVD machines or other electronic applications. Also is non-flammable fluid with a very low global warming potential (GWP.) This product's excellent inert and dielectric properties make it a viable replacement for higher GWP fluids such as PFCs and PFPEs in a wide variety of applications like microemulsion formulations and slow-evaporation coating diluent. Boiling Point @ 1 atm: 167°C (333°F) Pour Point: -50°C (-58°F) Molecular Weight: 528 Liquid Density: 1797 kg/m3 Coefficient of Expansion: 0.00111 K-1 Latent Heat of Vaporization @ 1 atm: 83.4 kJ/kg Vapor Pressure: <0.1 kPa Surface Tension: 18 dynes/cm Viscosity: 2.5 cSt Critical Temperature: 290°C (554°F) Critical Pressure: 1.41 MPa Solubility of Fluid in Water: <1 ppb by weight Dielectric Strength: 35 kV, 0.1" gap Volume Resistivity: 5 × 1011 ohm-cm Dielectric Constant: 6.7 Flammability: Nonflammable GWP: 420 Ozone Depletion Potential: 0.0 Global Warming Potential: 420 Atmospheric Lifetime (years): 5.6 Volatile Organic Compound (VOC): No Wide range of thermal management applications Wide liquid range Non-flammable Non-conductive Compatible with plastics Low toxicity Low Global Warming Potential (GWP) Cooling of Ion implanters, dry etchers and CVD machines in semiconductor and flat panel display manufacturing facilities Cool semiconductor thermal shock and test equipment Direct contact cooling of supercomputers and sensitive milatry electronics Cooling of high voltages transformers and power electronics Freeze drying and reactor cooling in pharmaceutical and chemical manufacturing processes

  Manufacturer: 3M | Product Line: 3M™ Novec™ Engineered Fluids | Package Sizes: 12lb Bottle, 40lb Drum

• 

  SYLTHERM™ 800

  A polydimethylsiloxane liquid with operating temperature ranges of -40°F to 750°F (-40°C to 400°C).

  Highly stable, long-lasting silicone fluid designed for high temperature liquid phase operations. Temperature: -40 to 750 °F (-40°C to 400°C) Vapor Pressure: 197.32 (91.84°C) Specific Heat: 0.360 °F (-17.57°C) Viscosity: 51.0 Density: 61.9 Freezing Point: < -40 °F (-40°C) Flash Point: 320 °F (160°C) Autoignition: 725 °F (385°C) Fluid life > 10 years at 400 °C Low toxicity No odor Non-fouling Very low in acute oral toxicity Used in NDC, Lube Oil Recycling, Heat Recovery, Polymer Processing, Carbon Fiber

  Manufacturer: Dow | Product Line: Syltherm™ Silicone Thermal Fluids | Package Sizes: Bulk, 9.63kg Can, 39.68lb Pail, 190.51kg Drum, 418.88lb Drum

• 

  SYLTHERM™ HF

  A polydimethylsiloxane liquid used from -40°C to 260°C.

  Specially formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. Temperature: -100 to 500 °F (-73.3°C to 260°C) Vapor Pressure: 39.6 Specific Heat: 0.347 °F (-17.5°C) Viscosity: 16.65 Density: 60.31 Freezing Point: <-115 °F (-81.6°C) Flash Point: 145 °F (62.7°C) Autoignition: 671 °F (355°C) Non-toxic with regard to acute oral ingestion Has a closed cup flash point > 62 °C Electrical classifications Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

  Manufacturer: Dow | Product Line: Syltherm™ Silicone Thermal Fluids | Package Sizes: Bulk, 8.64kg Can, 33.07lb Pail, 170.1kg Drum, 375lb Drum

• 

  SYLTHERM™ XLT

  A polydimethylsiloxane liquid used from -100°C to 260 °C

  Specifically formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. It offers remarkable low temperature heat transfer and pumpability, plus thermal stability. Temperature: -100 to 500 °F (-73.3°C) Vapor Pressure: 75.46 Specific Heat: 0.078 °F (-17.7°C) Viscosity: 90.17 Density: 59.3 Freezing Point: -158 °F (-105.5°C) Flash Point: 116 °F (46.6°C) Autoignition: 662 °F (350°C) Non toxic with regard to acute oral ingestion Physical properties allow it to be used in place of chlorinated solvents as a secondary coolant Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

  Manufacturer: Dow | Product Line: Syltherm™ Silicone Thermal Fluids | Package Sizes: 170kg Drum, Bulk, 33.07lb Pail, 375lb Drum, 8.52kg Can