Liquid-aqueous cleaner concentrate engineered to displace vapor degreasing products in solvent free precision cleaning operations.
C-NE 5088 (previously known as P3 Neutracare 5088) is designed for solvent-free precision cleaning with low environmental impact, minimal oil emulsification & robust operating temperature range. Appearance: Yellow Odor: Mild pH: 8.7-8.9 Low ecological impact – Phosphate free, low BOD, and low VOC. Minimal oil emulsification extends bath life and cleaning consistency. Operating temperature range : (130°F to 175°F)
Neutral based in-process cleaner with corrosion inhibitors for use on steel & cast iron and aluminum at room temperature.
C-NE 5156 (previously known as P3 Neutracare 5156) is a neutral based cleaner engineered for corrosion protection on ferrous & aluminum alloys. Formulated with a unique combination of alkalinity, corrosion protectors, surfactants & biocides to deliver a durable low-foaming product for light to moderate duty cleaning applications. Appearance (Concentrate): Clear yellow Appearance (Dilution): Cloudy pH (Concentrate): 9.6 pH (Dilution): 8.8 (at 5%) Operating temp range: 60 °F – 100 °F Typically used between 1-3% in water for most operations. Provides short term indoor protection for up to 4 weeks. Conventional spray, vibratory, ultrasonic & immersion washers are suitable for use.
Neutral based in-process cleaner with corrosion inhibitors for use on steel & cast iron at elevated temperatures.
C-NE 5175 (previously known as P3 Neutracare 5175) has a unique composition of corrosion protection, surfactants & alkalinity that provides a robust low-foaming product for light to moderate duty cleaning & protection requirements. Appearance (Concentrate): Clear yellow Appearance (Dilution): Clear pH (Concentrate): 10.7 pH (Dilution): 9.4 (at 5%) Operating temp range: 120 °F – 160 °F Typically used between 1-3% in water. Conventional spray, vibratory, ultrasonic and immersion washers are suitable for use.
Synthetic additive for use in metal working coolant to provide cleaner operation.
Bonderite® L-AD S is a synthetic based additive for metal working fluids to enhance cleanliness of machinery & work pieces. Suitable for use on steel, cast iron, aluminum, copper, brass and bronze substrates. Appearance: Yellow fluid pH: 7.0 at 1.0%
High performance lubricant concentrate for high speed weaving of chain link fencing.
Semi-synthetic lubricant engineered for high speed weaving of chain link fence. Can be used for galvanized and pre-galvanized wire from 6-11.5 gauge. Contains added Extreme Pressure packages that help to improve tool life and is low foaming. Appearance: Clear, straw colored liquid. pH, neat: 7.5-8.0 Specific gravity: 1.02 Freeze point: <20⁰F (-7⁰C) Provides cost effective lubrication at low bath concentrations. High detergency maintains metal and equipment cleanliness. Resists bacterial growth in bath due to semi-synthetic characteristics. Extremely low foaming operation. Bonderite® L-FM F SW-7 is engineered for use on galvanized and pre-galvanized wire ranging from 6 to 11.5 gauge. Typical bath concentrations by volume will range from 5% to 20% dependent on gauge size.
Water emulsifiable compound to protect against white rust on galvanized wire and fence.
Bonderite® L-FM J (previously known as Galvaseal J) is engineered to provide a protective coating for galvanized wire and fencing. The compound can also be used as a lubricant in light-duty applications (ex: drawing, fence weaving and die polishing). Excellent rust protection & prevention. Excellent lubrication performance. Can be used on tinned, cadmium and alloy coated wires as well. Provides thin-wax like lubrication film to aide in metal on metal contact during manufacturing and transport. Recommended concentration of the operating bath is between 2-5% and will vary depending on gauge of the wire. The Bonderite® L-FM J is also suitable for use on tinned, cadmium and alloy coated wires.
Solvent based corrosion inhibitor for extended corrosion protection on ferrous & non-ferrous alloys.
Bonderite® L-GP 4141 (previously known as P3 Prevox 4141) is a solvent based corrosion inhibitor for long-term corrosion protection on ferrous and non-ferrous alloys. The L-GP 4141 can be applied by dipping, airless spraying or by hand to provide extended indoor protection. Appearance: Clear amber fluid Flash point (PMCC): 143°F/62°C
Synthetic based corrosion inhibitor for short-term corrosion protection on ferrous alloys.
Bonderite® L-GP 505 (previously known as P3 Prevox 505) is a synthetic based corrosion inhibitor for short-term indoor corrosion protection on ferrous alloys. The L-GP 505 can be applied by dipping, airless spraying or by hand to the metal surface. Appearance: Light amber liquid pH : 10.7 Refractometer: 1.92 Film type: No-tacky, clear fluid Low Foaming Durable Performance
Soluble oil based corrosion inhibitor for long-term corrosion protection on ferrous & non-ferrous alloys.
Bonderite® L-GP 5800 (previously known as P3 Prevox 5800) is a soluble oil based corrosion inhibitor designed for long-term corrosion protection on ferrous & non-ferrous alloys. Appearance: Clear brown pH: 9.2 @ 5% Refractometer: 1.0
Ludox HSA is a small particle sized collidal silica with a 30% silica content and slight acidity
Ludox HSA is useful in applications such as coatings or catalysts in which sodium or alkaline components aren't desired. It is designed to be more stable than most competitive de-ionized colloidal silica Density (g/cm³, lb/gal): 1.2, 10 Boiling Point (760 mm Hg) °C/°F: 100/212 Melting Point °C/°F: 0/32 Vapor Pressure (25°C) mm Hg: 24 Vapor Pressure (38°C) mm Hg: 48 Stabilizing Counter Ion: None Particle Charge: Negative Biocide ppm: 25 High surface area Excellent stability Broad pH stability Low sodium content
Lugalvan® BNO 24 is a nonionic surfactant for use in the electroplating industry and the chemical and allied industries with a lower concentration of 74-76% compared to the BNO 12.
Lugalvan® BNO 24 is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power and improving ductility. It can also be used to substantially increase the cloud point of zinc plating baths. It needs to be employed at a concentration of 2 – 6 g/l. Concentration: 74-76% Water Content: 24-26% Density: 1.11-1.14 g/cm3 Viscosity: 155*205 mm2/s Cloud Point: 80-84 °C pH: 6-8
Lugalvan® DC is an aqueous emulsion of an ethylene copolymer that is commonly applied to metal surfaces to improve resistance to corrosion and to improve aesthetic appearance.
The usage of Lugalvan® DC forms films which adhere well to metal. It is especially effective on chromated, zinc-plated parts and it also reduces the tendency of chromium(VI) ions to be leached out. It can be used to prevent nickel and other metals from tarnishing, and it can be applied as a decorative coating to non-ferrous metals. Physical Form: Aqueous, opalescent emulsion Concentration: 20 – 22 % Viscosity: 25 –170 at 23°C Density 0.98 –1.00 g/cm3 pH: 8.5 – 9.
Lugalvan® FDC is a metal surface treatment that is free of emulsifiers and acts as a transparent passivating film or an adhesion promoter which allows for simplified processes and substantial cost savings.
Lugalvan® FDC is often used by metal finishers as a copolymer to reduce their manufacturing costs because the aluminum does not have to be degreased prior to product application. Colour: White - Yellow pH: 8.5 - 9.5 Freezing point: 0°C Boiling point: 100°C Flash point: >100°C Autoignition: >200 °C Density: 0.98 - 1 g/cm3
Lugalvan® G 35 is used to formulate brightener additives employed in the electroplating industry, especially as a polymeric basic brightener in zinc electrolytes.
Lugalvan® G 35 can be used as a protective colloid in the chemical and allied industries. It is typically employed at a concentration of 0.5 – 5 g/l. Concentration: 48–52% Refractive index: 1.450 Viscosity: 80 – 130 s pH: 10 – 12 Density: 1.08 g/cm3
Lugalvan® P is an additive that is very soluble in saline media. The product is impervious to water hardness and protects metals against corrosion in acidic, neutral and alkaline media.
Lugalvan® P is an easy-to-formulate corrosion inhibitor used in galvanoplating, descaling boilers, preventing deposits and inhibiting corrosion in crude oil production. Color: Colourless to Yellow pH value: 7.5-9 Boiling Point: 105 °C Flash Point: 100 °C Flammability: Not Flammable Vapour Pressure: 23.4 mbar
ISO 320 polypropylene glycol monobutyl ether used as a rust-preventive coating.
A rust-preventive fluid used to coat metal parts with a viscosity of 250-285 cSt @ 100 °F Color: colorless to yellow Odor: Mild Boiling point (760 mmHg): > 200 °C Flash point closed cup 201 °C Vapor Pressure: < 0.01 mmHg at 20 °C Relative Density (water = 1): 1.000 at 20 °C Water solubility: < 0.1 % at 20 °C Pour point: -30 °C Outstanding hydrolytic stability Able to be mixed with other natural oils, organic solvents, plastizers, resins, or gums Excellent load carrying capacity Fire resistant Anti-varnish Good deposit control Outstanding hydrolytic stability Low to high viscosity ranges Low friction coefficients High extreme pressure failure loads Low pour point temperatures Noncorrosive to metals Compressor oils Fire resistant hydraulic fluids Gas turbine oils
ISO 150 polypropylene glycol monobutyl ether used as a rust-preventive coating.
A rust-preventive fluid used to coat metal parts with a viscosity of 114-145 cSt @ 100 °F Color: Brown Odor: Mild Boiling point (760 mmHg): > 200 °C Flash point: closed cup 191 °C Vapor Pressure: < 0.01 mmHg at 20 °C Relative Density (water = 1): 1.000 at 20 °C Kinematic Viscosity: 114 - 145 cSt at 37.8 °C Pour point: -35 °C Outstanding hydrolytic stability Able to be mixed with other natural oils, organic solvents, plastizers, resins, or gums Excellent load carrying capacity Fire resistant Anti-varnish Good deposit control Outstanding hydrolytic stability Low to high viscosity ranges Low friction coefficients High extreme pressure failure loads Low pour point temperatures Noncorrosive to metals Used as lubricating and preservative coatings for hydraulic brake parts and similar equipment.