There are no products found that meet this criteria.

• 

  2-Ethylhexyl Acrylate

  2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.

  Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 399.92lb Drum

• 

  AP 550-1-25% Aromatic 100

  A nonchlorinated polyolefin adhesion promoter supplied at 25% solids in aromatic 100.

  Adhesion promoter for Polypropylene and thermoplastic olefin substrates. Form: Viscous liquid Color: Yellow Odor: Aromatic Specific gravity in water: Negligible Flash point (Pesky-Martens closed cup): 46,8°C Thermal decomposition Temperature (DSC): No exotherm to 500°C Excellent performance under 2K urethane coatings Excellent adhesion and gasoline resistance Soluble in aromatic hydrocarbon solvents such as xylene, toluene and aromatic 100 Can be used as a primer or an additive

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 160kg Drum

• 

  AP 550-1-25% Xylene

  A nonchlorinated polyolefin adhesion promoter supplied at 25% solids in xylene.

  Adhesion promoter for polypropylene and thermoplastic olefin substrates. Form: Viscous liquid Color: Yellow Odor: Aromatic Specific gravity in water: <1 Boiling point: 137-144°C Solubility: Negligible Flash point (Pesky-Martens closed cup): 46,8°C Thermal decomposition temperature (DSC): No exotherm to 500°C Excellent performance under 2K urethane coatings Excellent adhesion and gasoline resistance Soluble in aromatic hydrocarbon solvents such as xylene, toluene and aromatic 100 Can be used as a primer or an additive

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 12kg Pail

• 

  Butyl Acrylate

  Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

  Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 410.0593lb Drum

• 

  CAB-171-15

  CAB-171-15 has the lowest butyryl content grade in the CAB range, offering superior hardness and toughness.

  CAB-171-15 is a cellulose ester resin with a low butyryl content and high viscosity content. It is one of the toughest CABs. It is recommended for thermoplastic lacquers with a good resistance to chemicals, solvents or heat are required, such as wire coatings, textile coatings, and printable films. This grade has limitations in compatibility though. Viscosity ASTM-A, sec: 14 - 24 Acetyl by GC, wt%: 28 - 31 Butyryl by GC, wt%: 16.5 - 19 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.4 Film toughness Heat resistance Improves flow and leveling Reduces cratering Reduces dry time Provides polishability Improves sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-321-0.1

  CAB-321-0.1 is a cellulose ester resin with a low butyryl content. The low viscosity permits higher solids concentrations.

  CAB-321-0.1 is a cellulose ester resin with a low butyryl content low high viscosity content. Cellulose esters provide excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 14 - 24 Acetyl by GC, wt%: 28 - 31 Butyryl by GC, wt%: 16.5 - 19 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.4 Film toughness Heat resistance Improves flow and leveling Reduces cratering Reduces dry time Provides polishability Improves sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-0.1

  CAB-381-0.1 is a cellulose ester resin with a medium butyryl content and has the lowest molecular weight of the 381 range. This product is designed for use in curing coatings and inks.

  CAB-381-0.1 is with its medium butyryl content soluble and compatible with many resins and plastizers. It provides excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 0.07 - 0.16 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-0.5

  CAB-381-0.5 is an ester with low viscosity and medium butyryl content. It is designed for relatively high solid applications.

  CAB-381-0.5 is a general purpose butyrate and recommended for many types of coatings and inks. It provides excellent color, flexibility, flow control, pigment dispersion and weather resistance. 381 is compatible with many resins and soluble in low-cost solvent systems. This low viscosity 381 provides wetting and adhesion improvement in inks. In coatings improved metal flake orientation, resistance to redissolve from the topcoat solvents excellent sprayability are key benefits. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag, 20kg Bag

• 

  CAB-381-2

  CAB-381-2 is a resin with a high viscosity. It is effective in increasing cold-crack resistance and results in greater film toughness.

  CAB-381-2 is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 1.2 - 2.8 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-2 BP

  CAB-381-2 BP is similar to CAB-381-2 designed to meet the needs of European formulators.

  CAB-381-2 BP is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-20

  CAB-381-20 has the highest viscosity in its range and can be used as both binder and thickener in coatings and inks.

  CAB-381-20 is a cellulose ester resins with medium butyryl content and high viscosity. It provides excellent color, greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 17 - 28 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 35 - 39 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-20 BP

  CAB-381-20 BP is a slightly modified version of CAB-381-20 designed to meet the needs of European formulators.

  CAB-381-20 BP is a cellulose ester resins with medium butyryl content and high viscosity. It provides greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 12 -20 Acetyl by GC, wt%: 14 - 17 Butyryl by GC, wt%: 33.0 -38.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.5 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-500-5

  CAB-500-5 has a high butyryl and low hydroxyl content and medium viscosity. It results in flexible films requiring limited amount of plasticizers.

  CAB-500-5 is a cellulose acetate butyrate and used as binder or additive in coatings and inks. With a high butyryl level, CAB-500-5 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It has tolerance for nonpolar aliphatic and aromatic hydrocarbons. Viscosity ASTM-A, sec: 3 - 6 Acetyl by GC, wt%: 2.5 -5 Butyryl by GC, wt%: 49 - 53 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-531-1

  CAB-531-1 is a high butyryl cellulose ester resin. It provides tough films with good marring resistance.

  CAB-531-0.1 is used as binder or additive in coatings and inks. The high butyryl level provides high flexibility, high solubility, good adhesion and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. Viscosity ASTM-A, sec: 1.3 - 2.6 Acetyl by GC, wt%: 2 - 4 Butyryl by GC, wt%: 48 - 52 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.1 - 2.1 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-551-0.01

  CAB-551-0.01 is the lowest viscosity cellulose ester resin with the highest butyryl substitution.

  CAB-551-0.01 is used as binder or additive in coatings and inks. The high butyryl level contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. Due to its low molecular weight, 551-0.01 provides better flow and wetting. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. Viscosity ASTM-A, sec: 0.01 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 50-54 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.6 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-551-0.2

  CAB-551-0.2 is a high butyryl, and relatively low molecular weight resin. It is compatible with numerous cross-linking resins.

  CAB-551-0.2 is cellulose ester used as binder or additive in coatings and inks. With the high butyryl level, CAB-551 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is widely used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. Viscosity ASTM-A, sec: 0.16 - 0.25 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 49.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Soluble in alcohol

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-553-0.4

  CAB-553-0.4 is a high butyryl, high hydroxyl cellulose ester resin. It is soluble in alcohols.

  CAB-553-0.4 is used as binder or additive in coatings and inks. The high butyryl level provides high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. CAB-553 is soluble in alcohol and organic solvents, it even tolerates a substantial portion of water. Viscosity ASTM-A, sec: 0.16 - 0.40 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 44- 50 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 4.0 - 5.0 Soluble in alcohol Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag, 20kg Bag

• 

  CAP-482-0.5

  CAP-482-0.5 is a cellulose acetate proprionate with a high solubility. Propionates are stable to UV light and nearly odorless.

  CAP-482-0.5 has a high propionate level at a low viscosity. Cellulose acetate propionate (CAP) are highly soluble and compatibility with most common resins. They have low odor and therefore recommended to use in inks, OPVs, plastic and paper coatings. Propionates are effictive in dispersing pigments and stable to ultraviolet light. They do nt react with dyes, fluorescent colors, or metallic pigments. ASTM-A viscosity, sec: 0.5 Acetyl by GC, wt%: 2.5 Max Propionyl by GC, wt%: 45-49 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Low odor Non-yellowing Good flow and levelling Pigment dispersion medium Reduced blocking Chemical resistance Reduced dry time

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAP-482-20

  CAP-482-20 is similar to CAP-482-0.5 except its high viscosity.

  CAP-482-20 has a high propionate level and a high viscosity. Cellulose acetate propionate (CAP) are highly soluble and compatibility with most common resins. They have low odor and therefore recommended to use in inks, OPVs, plastic and paper coatings. Propionates are effictive in dispersing pigments and stable to ultraviolet light. They do nt react with dyes, fluorescent colors, or metallic pigments. ASTM-A viscosity, sec: 15 - 25 Acetyl by GC, wt%: 2.5 Max Propionyl by GC, wt%: 45-49 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Low odor Non-yellowing Good flow and levelling Pigment dispersion medium Reduced blocking Chemical resistance Reduced dry time

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAP-504-0.2

  CAP-504-0.2 provides high cross linking, is soluble in alcohol and is nearly odorless.

  CAP-504-0.2 has the highest hydroxyl level of the CAP range with a low viscosity. Cellulose acetate propionates (CAP) are highly soluble and compatibility with most resins. They have low odor and therefore recommended to use in inks, OPVs, plastic and paper coatings. Propionates are effective in dispersing pigments and stable to UV light. They do not react with dyes, fluorescent colors, or metallic pigments. ASTM-A viscosity, sec: 0.10 - 0.20 Acetyl by GC, wt%: 1.0 Max Propionyl by GC, wt%: 40-45 Free acidity, ppm: 400 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 4.4-5.6 Low odor Non-yellowing Good flow and levelling Pigment dispersion medium Reduced blocking Chemical resistance Reduced dry time

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  Capstone™ FS-34

  Aqueous nonionic ethoxylated fluorinated surfactant that is VOC-free, APEO-free, nonflammable, and stable in acidic, basic, brine, and hard water environments.

  Capstone™ FS-34 is all-purpose, water-soluble, ethoxylated, nonionic fluorosurfactant that changes surface energies at very low concentrations. FS-34 is VOC-free, APEO-free, nonflammable, and compatible with additives and resins of any ionic class. Appearance: Light yellow to dark amber liquid pH: 5.5-7.5 g/mL Specific Gravity: 1.10 Stability: Freeze-thaw stable Composition: 25% solids Shelf Life: 5 years VOC-free APEO-free Nonflammable Compatible with additives and resins of any ionic class Stable in acidic, basic, brine, and hard water environments Reduces drag-out from bath applications Provides wetting and leveling Lowers surface tension Reduces surface defects Water-Based Floor Care (Finishes, Waxes, and Polishes), Concentrated Cleaning Solutions, Aqueous-Based Paints and Inks, Stability and Surface Activity in Brine and Aggressive (Acidic and Basic) Media

  Manufacturer: Chemours | Product Line: Capstone™ Fluorosurfactants | Package Sizes: 400lb Drum, 40lb Pail

• 

  Capstone™ FS-65

  Aqueous nonionic fluorinated surfactant that is VOC-free, APEO-free, and stable in acidic, basic, and brine environments.

  FS-65 is VOC-free and APEO-free, and has a strong non-ionic character under all conditions. It is stable in acidic, basic and brine environments. In addition to providing superior performance, FS-65 meets the OECD 301B test methods criteria pertaining to biodegradability. Appearance: Yellow to amber liquid pH: 7.5–9 Specific Gravity: 1.1 g/mL Stability: Mix well before use. Freeze-thaw stable. Warm the product to room temperature, and mix before use after cold storage. Stable in brine and aggressive media. Composition: 25% solids Shelf Life: 5 years Foam: Can foam with excessive shaking VOC-free Water-soluble Anti-blocking Oil repellency Low foaming Wetting and enhanced leveling Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency REACH compliant Listed on TSCA inventory Architectural coatings, Industrial finishes, Water-based floor care (Finishes, Waxes, and Polishes), Concentrated cleaning solutions, Additive to water-based paints and coatings, etching applications, Stability and Surface Activity in Brine and Aggressive (Acidic and Basic) Media

  Manufacturer: Chemours | Product Line: Capstone™ Fluorosurfactants | Package Sizes: 125lb Drum, 2200lb Tote, 40lb Pail

• 

  CELLOSIZE™ EP-09

  CELLOSIZE™ EP-09 is a water-soluble cellulose thickener. It has the lowest viscosity of the CELLOSIZE™ product range of 90-160 cP. EP stands for emulsion polymerization grade.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. EP-09 is surface treated to increase dispersion in water. Viscosity: 90 to 160 cP Volatiles: 6 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-100MH

  CELLOSIZE™ QP-100MH has the highest molecular weight of all CELLOSIZE products. This grade provides a high thickening efficiency.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-100MH is widely used as thickener and yields a viscosity of 4,400 tp 6,000 cP. This grade provides the most pseudoplastic rheology and very effective where high thickening is desired. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 1.50 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective thickener Film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 25kg Bag, 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-15000H

  CELLOSIZE™ QP-15000H is a cellulosic thickener with a medium molecular weight. As a general purpose thickener it is used in coatings, cleaners and adhesives.

  CELLOSIZE™ QP-15000H EUR yields a viscosity of 1,100 to 1,500 cP. CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 1,100 to 1,500 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-300

  CELLOSIZE™ QP-300 is a hydroxylethyl cellulose (HEC) polymer with a medium viscosity of 300-400 cP. It can be used as a thickener and film former.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 300 to 400 cP Volatiles: 5.0 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Thickener Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-30000H

  CELLOSIZE™ QP-30000H is a general purpose thickener with a high molecular weight. It yields viscosity of 1,500-2,400 cP at low addition levels.

  CELLOSIZE™ QP-30000H is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-30000H has a medium molecular weight. Viscosity: 1,500 to 2,400 cP Volatiles: 6 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-4400H EUR

  CELLOSIZE™ QP-4400H is a medium viscosity water-soluble cellulosic polymer. This HEC is a general purposed thickener for various applications. It yield a viscosity of 4,800-6,000 cP at low addition levels.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 0.80 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-52000H

  CELLOSIZE™ QP-52000H has a high molecular weight water-soluble thickener. It is a efficient thickener and commonly used in adhesives and cleaning products.

  CELLOSIZE™ QP-52000H is due to its high molecular weight a very efficient thickener. CELLOSIZE™ hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 2,400 - 3,000 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CP 164-1-25% Xylene

  A 25% soution in xylene of CP-164-1-100% solids.

  See CP 164-1-100%. Specific gravity @25°C: 0.898 Flash point, tag closed cup: >23°C (74°F) Color, Gardner: 12-16 Chlorine: 18-23 wt% See CP 164-1-100%

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 180kg Drum

• 

  CP 343-3-25% Xylene

  A 25% solution of chlorinated polyolefin in xylene with 26-32% chlorine.

  CP343 is a higher chlorinated adhesion promoter that can be used as an additive in coatings, inks or adhesives. The higher chlorine content allow for improved solutbility in a variety of solvents and compatibility with different coatings, inks and adhesives systems. Specific gravity @25°C: 0.906 Flash point, tag closed cup: 23°C (74°F) Fire point: 36°C (97°F) Color, Gardner: 6-7 Autoignition temperature (Test method - D 2155): >538°C (>1000°F) Specific gravity, solid CPO @25°C: 1.108 Chlorine: 26-32 wt% Adhesion to polypropylene, Thermoplastic polyolefin, non olefin plastics and metals Good solvent tolerance for a wide range of solvents Excellent stir-in additive in industrial coatings and inks Enhanced compatibility with various resins

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 15kg Pail, 180kg DR180KG

• 

  CP 343-3-50% Xylene

  A 50% solution of chlorinated polyolefin in xylene with 26-32% chlorine and a Gardner color of 6-7.

  See 343-3-25%. Specific gravity @25°C: 0.986 Flash point, tag closed cup: 27°C (80°F) Color, Gardner: 11 Specific gravity, solid CPO @25°C: 1.108 Chlorine: 26-32 wt% See 343-3-25%

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 15kg Pail, 180kg DR180KG

• 

  DMAA (Dimethylacetoacetamide)

  Liquid containing 20% water, used as a general-purpose copromoter for many unsaturated polyester formulations.

  Eastman™ DMAA (N-Dimethylacetoacetamide) is a low color generating copromotor in many resin based formulations. It has shown better performance compared with DMA as a copromoter at equivalent treat rates in PG, NPG, and other glycols. Appearance: Liquid Assay: 79-83 wt% Specific gravity @ 20°C/20°C: 1.06 Flash point open cup: 122°C (252°F) Water: 17-21 wt% Molecular weight: 129.2 CAS: 2044-64-6 Low color and toxicity Easy handling with liquid form Used as a copromoter for paints and coatings and intermediate manufacturing for agricultural chemicals.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 475lb Drum

• 

  EAA Kosher

  Tautomer at room temperature, its a colorless liquid with a fruity odor.

  Eastman™ EAA consists of 8% enol and 92% keto commonly used as a low color-generating copromoter to formulate unsaturated polyester resins. It is soluble in common organic solvents and water to fit many application needs. Appearance: Liquid Molecular weight: 130.14 cP Flash point: 68°C (157°F) Boiling point: 180.8°C (357.4°F) Melting point: -45°C Specific gravity @ 20°C/20°C: 1.03 CAS: 105-45-3 Kosher certified Fruity odor Low color Readily soluble in styrenated resins Used as a copromoter in paints and coatings and used as an intermediate for herbicides and insecticides.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 463lb Drum

• 

  Elvacite® 2014

  Medium molecular weight methyl methacrylate copolymer; the softest and most flexible of the copolymer grades and provides great pigment wetting. Elvacite® 2014 also has a wide range of resin compatibility.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 41 Molecular weight: 119,000 Form: Spherical beads Particle size (D50): 120-200 microns Specific gravity: 1.14 Inherent viscosity b: 0.37-0.43 Acid number: 13 Moisture (% max): 0.5 Tukon hardness, knoop no. 4 Tensile strength, psi 3,500 Elongation at break (23°C, 50% RH): 18% Increased flexibility Soluble in alcohol Increased abrasion resistance Better wear Binder for concrete sealant and coating, traffic paint, clear, translucent or pigmented metal coatings, pigmented coatings to improve pigment wetting, seamless floors

  Manufacturer: Dianal | Product Line: Elvacite® Specialty Acrylic Resins | Package Sizes: 55lb Bag

• 

  Elvacite® 2016

  General purpose low viscosity, low molecular weight methyl methacrylate/n-butyl methacrylate copolymer.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 59 Molecular weight: 60,000 Form: Spherical beads Particle size (Microtrac® D50): 170 - 265 microns Specific gravity: 1.13 Inherent viscosity b: 0.230-0.255 Acid number: 3.5 Moisture (% max): 0.50 Tukon hardness, knoop No. 8 Tensile strength, psi 2,300 Elongation at break (23°C, 50% RH): 2% Excellent hardness Low hazard High gloss Resistance to UV discoloration Fast dissolving Low viscosity Clear, translucent or pigmented metal coatings, heat seal lacquers, traffic marking paints, inks

  Manufacturer: Dianal | Product Line: Elvacite® Core Acrylic Resins | Package Sizes: 275lb Drum, 300lb Drum, 55lb Bag

• 

  Elvacite® 4048

  Often used with ceramic printing ink applications and varnishes due to it's excellent solubility in various solvents.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Molecular weight: 23,000 Acid number: 8 mb KOH/g Tg: 37°C Reduced viscosity: 0.14 - 0.16 dl/g Wide range of solubility in various solvents Good compatibility with many binders and waxes

  Manufacturer: Dianal | Product Line: Elvacite® Specialty Acrylic Resins | Package Sizes: 55lb Bag

• 

  Elvacite® 4055

  Methacrylate copolymer designed for pigment dispersion. Elvacite® 4055 can be used with typical acrylic, alkyd and epoxy resins.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Glass transition temp, onset: 76°C Molecular weight: 6,000 Acid number: 7 Inherent viscosity: 0.040 - 0.065 % Moisture: 0.5 (max) % Methacrylic acid: 0.450 - 1.20 Used in universal pigment pasts Wide range of compatibility Dissolves at room temperature

  Manufacturer: Dianal | Product Line: Elvacite® Specialty Acrylic Resins | Package Sizes: 275lb Drum

• 

  Epolene® C-13P Polymer

  Epolene® C-13P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

  Epolene® C-13P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000 and is the powder form of Epolene® C-13 Polymer Type: LDPE Product Form: Powder Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 40lb Bag

• 

  Epolene® N-10P Polymer

  Epolene® N-10P is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

  Epolene® N-10P is a medium molecular weight low density polyethylene powder that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 10,000 and is available in powder form. Polymer Type: LDPE Molecular Weight: 10,000 Ring and Ball Softening Point: 108°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 44.09lb Bag

• 

  Epolene® N-11P Polymer

  Epolene® N-11P is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

  Epolene® N-11P is a low density polyethylene powder that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 5,000 and is available in powder form. Polymer Type: LDPE Molecular Weight: 5,000 Ring and Ball Softening Point: 107°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 350 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Graphic arts, wax modification, inks, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-14 Polymer

  Polyethylene polymer with a viscosity of 150 cP that is easily blended with natural or synthetic waxes to enhance properties

  Epolene® N-14 aids in pigment dispersion, mold release applications and improves the gloss of paper and coatings. Polymer Type: PE Mettler Softening Point: 108C Penetration Hardness: 3 dmm Viscosity, Brookfield @125C ( 257F): 150 cP Molecular Weight: 4000 Pigment dispersion aid Easy blend with natural and synthetic waxes Low density polyethylene Increases scuff and rub resistance in inks Improved physical properties in paper coatings Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Epolene® N-14P Polymer

  Polyethylene polymer with a viscosity of 150 cP that is easily blended with natural or synthetic waxes to enhance properties.

  Identical to Epolene® N-14 but in powder form Polymer Type: PE Mettler Softening Point: 108C Penetration Hardness: 3 dmm Viscosity, Brookfield @125C ( 257F): 150 cP Molecular Weight: 4000 Physical Form: Powder Pigment dispersion aid Easy blend with natural and synthetic waxes Low density polyethylene Increases scuff and rub resistance in inks Improved physical properties in paper coatings Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-21P Polymer

  Identical to Epolene® N-21 but in powder form

  Epolene® N-21 is a PE wax used in cable filling, printing inks and hot melt adhesive applications Polymer Type: PE Mettler Softening Point: 120C Penetration Hardness: <1 dmm Viscosity, Brookfield @125C (257F): 600 cP Molecular Weight: 6,500 Physical Form: Powder Medium density polyethylene Higher melt point and hardness imparts improved resistance to solvents and oils Improved slump resistance in cable filling and flooding Viscosity modifier in hot melts Lubricity in printing inks Wax modification Wire and Cable

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-30 Polymer

  Epolene® N-30 is PE homopolymer with a viscosity of 1050 cP that can be blended with natural and synthetic waxes.

  N-30 can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer Type: PE Mettler Softening Point: 110C Penetration Hardness: 2 dmm Viscosity, Brookfield @125C (257F): 1050 cP Molecular Weight: 9,200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-34 Polymer

  Polyethylene polymer with a viscosity of 450 cP that is easily blended with natural or synthetic waxes to enhance properties.

  N-34 can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 5 dmm Viscosity, Brookfield @125 (257F): 450 cP Molecular Weight: 6200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-34P Polymer

  Identical to Epolene® N-34 available in powder form

  N-34P can be used in automotive, hot melt adhesives, packaging and wax modification applications Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 5 dmm Viscosity, Brookfield @125 (257F): 450 cP Molecular Weight: 6200 Blends easily with natural or synthetic waxes Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Epolene® N-35 Polymer

  Polyethylene polymer with a viscosity of 700 cP that is easily blended with natural or synthetic waxes to enhance properties.

  N-35 can be used in automotive, hot melt adhesives, packaging and wax modification applications. It also improve the gloss of paper coatings Polymer type: PE Mettler Softening Point: 104C Penetration Hardness: 3 dmm Viscosity, Brookfield @125 (257F): 700 cP Molecular Weight: 7580 Blends easily with natural or synthetic waxes to increase tensile strength Improved physical properties of paper coating Increased scuff and rub resistance in inks Aids in pigment dispersion Low density PE Wax modification Mold Release

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 10 Industrial

  ETHOCEL™ Standard 10 Industrial is a thickener for solvent based systems. It is an ethylcellulose with a high purity and provides consistent performance.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 10 Premium

  ETHOCEL™ Standard 10 Premium is Pharma compliant and similar to ETHOCEL™ Standard 10 Industrial.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Pharma compliant Organosoluble Thermoplastic Highly compatible with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 100 Industrial

  ETHOCEL™ Standard 100 Industrial is a solvent based cellulose ether thickener. It has a ethoxyl content of 49% and yields a viscosity of 100 cP at moderate addition level.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 90.0 - 110.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 20 Industrial

  ETHOCEL™ Standard 20 Industrial is a solvent based cellulose thickener with a viscosity of 20 cP.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 20 an ethoxyl content of 49%. Viscosity: 18.0 - 22.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 200 Industrial

  ETHOCEL™ Standard 200 Industrial is solvent based thickener. It is a cellulose ether yielding a viscosity of 200 cP at moderate addition level.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 180.0 - 220.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 18.14kg Bag, 40lb Bag

• 

  ETHOCEL™ Standard 300 Industrial

  ETHOCEL™ Standard 300 Industrial is cellulose ether thickener for solvent based systems. It has the highest viscosity of the ETHOCEL™ range.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 270.0 - 330.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 18.14kg Bag, 40lb Bag

• 

  ETHOCEL™ Standard 4 Industrial

  ETHOCEL™ Standard 4 Industrial is a cellulose ether thickener for solvent based systems. With 4 cP, it has the lowest viscosity of the ETHOCEL™ range.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 4 has a low viscosity of 4 cP and an ethoxyl content of 49%. Viscosity: 3.0 - 5.5 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 45 Industrial

  ETHOCEL™ Standard 45 Industrial is a cellulose ether thickener for solvent based systems. It has a ethoxyl content of 49% and a viscosity of 45 cP.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 45 Premium

  ETHOCEL™ Standard 45 Premium is Pharma compliant and has the same properties as ETHOCEL™ Standard 45 Industrial.

  ETHOCEL™ Standard 45 Premium is a solvent soluble cellulose ether thickener. It has a ethoxyl content of 49% and a viscosity of 45 cP. ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% wt Max Residue on Ignition: 0.040% wt Max Pharma compliant with USP, NF, EP, JPE, FCC Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 7 Industrial

  ETHOCEL™ Standard 7 Industrial is an ethylcellulose polymer with a viscosity of 7 cP and yields an ethoxyl content of 49%.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 7 has a low viscosity of 7 cP and an ethoxyl content of 49%. Viscosity: 6.0 - 8.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Glacial Acrylic Acid

  Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 470lb Drum

• 

  MERPOL® HCS

  Effective nonionic wetting agent and emulsifier with a cloud point >100°C so it is effective when many other surfactants are not. Excellent in galvanizing as an insulator for a flux tank.

  Stepan is a world leader in providing surfactants in many consumer and industrial application. They offer a broad range of cationic, nonionic, amphoteric and anionic surfactants which meet specific customer needs. % Active: 60 Cloud Point: >100°C CMC: 0 mg/l Density: 1.03 g/ml Draves Wetting, sec @ 25°C: >1 Flash Point, PMCC,: >100°C Form @ 25°C: Liquid Freeze Point: -5°C HLB: 15.3 Pour Point: -2°C Specific Gravity @ 25°C: 1.03 Surface Tension: 41.0 mN/m Viscosity, cps @ 25°C: 35 Surface tension reduction Stable as wetting agent for bleaching liquors Stability improvement for softener and resin formulations

  Manufacturer: Stepan Specialty Products | Product Line: Zelec® And Merpol® Alcohol Phosphates-Ethoxylates | Package Sizes: 400Lb Drum, 40lb PL40LB

• 

  METHOCEL™ A4M

  METHOCEL™ A4M is a methylcellulose and yields a viscosity of 4,000 cP. It is used as thickener, binder, film former, and water-retention agent.

  METHOCEL™ A4M is a water-soluble methylcellulose. Methocel products also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 3,500 - 5,600 cP Yields optimum performance at a lower concentration Water soluble No ionic charge pH stable Thermal gelation which is reversible

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 20kg Bag, 50lb Bag

• 

  METHOCEL™ E5 Premium LV

  METHOCEL™ E5 Premium LV is a Hydroxypropyl Methylcellulose (HPMC) thickener which yields a very low viscosity of 5 cP. It is a pharmaceutical grade.

  METHOCEL™ E5 Premium LV is a water-soluble polymer derived from cellulose. This pharmaceutical grade can be used in Industrial applications. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 4.0 - 6.0 cP Methoxyl: 28.0 - 30.0% Hydroxypropoxyl: 7.0 - 12.0% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras This grade can be used in Industrial applications.

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 110.23lb Drum, 25kg Drum

• 

  METHOCEL™ J12MS

  METHOCEL™ J12MS is a surface treated HPMC resulting in delayed viscosity build up to 12,000 cPs. It has one of the highest substitution levels.

  METHOCEL™ J12MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydropropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 10,000 - 16,500 cPs

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 55.1lb Bag

• 

  METHOCEL™ J75MS

  METHOCEL™ J75MS is a Hydroxypropyl Methylcellulose (HPMC) thickener with very high substitution. Is has a viscosity range from 60,000 to 75,000 cPs at low addition levels. This grade is surface treated with a slow viscosity build up.

  METHOCEL™ J75MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydroxypropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 60,000 - 90,000 cP Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 55.1lb Bag

• 

  METHOCEL™ K100LV

  METHOCEL™ K100LV is a hydroxypropyl methylcellulose (HPMC) thickener with low substitution. It has a low viscosity of 100 cP at low addition levels.

  METHOCEL™ K100LV is a low viscosity methylcellulose polymer. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 80 - 120 cP Moisture, as packaged: 3.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ K15M

  METHOCEL™ K15M is a HPMC thickener with low substitution. It yields a viscosity of 15,000 cP and forms a soft gel texture. This Methocel has the highest gelation Temperature of 70°C-90°C (158°F-194°F).

  METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ K15M Food Grade

  METHOCEL™ K15M Food Grade is the same as K15M, but is compliant with international Food standards.

  METHOCEL™ K15M Food grade is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 11,250 - 21,000 cPs Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Can be used in Industrial applications.

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 20kg Bag, 50lb Bag

• 

  METHOCEL™ K15MS

  METHOCEL™ K15MS is similar to K15M, except it is surface treated for a retarded dissolution.

  METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Delayed dissolution Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 44.092lb Bag

• 

  METHOCEL™ K4M

  METHOCEL™ K4M ia a hydroxypropyl ethylcellulose (HPMC) thickener with a low substitution. It has a viscosity of 4,000 cP at low addition levels.

  METHOCEL™ K4M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 12,000 - 21,000 cP Sodium Chloride: 2.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  Methyl Acrylate

  Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 429.9009lb Drum

• 

  n-Hexadecane 99 Pure

  A high-density, high-purity hydrocarbon with an impressively high flash point (125°C). It is widely used in the preparation of emulsions or as a substrate for the production of biosurfactants.

  Molecular weight: 226.4 Density: 773 Boiling point: 286.8 Solidification point: +18.0°C Refractive index: 1.4345 Flash point: >+100°C Specific heat: 2.078 Heat of vaporization: 227.4 Vapor pressure: 0.12 at 100°C Surface tension: 21.8 Kinematic viscosity: 0.59

  Manufacturer: Haltermann Carless | Product Line: Haltermann Carless High-Purity Hydrocarbons | Package Sizes: 342lb Drum, 99lb Pail

• 

  POLYBOND® 3000

  High efficiency coupling agent that improves strength and other physical properties in polypropylene systems filled with long glass fibers.

  POLYBOND® 3000 is a compatibilizer for filled PP systems and polypropylene / polyamide blends that provides improved physical properties, especially strength and hydrolytic stability. It is ideal as a tie-layer component, to improve compatibility between multilayer polar and non-polar materials. Appearance: Off-white pellet Melt Flow Rate @190 °C: 405 g/10 minutes Maleic Anhydride Content: 1.1-1.3% Density @ 23 °C: 0.91 g/cm³ Bulk Density @ 23 °C: 0.5 g/cm³ Melting Point: 157 °C High maleic anhydride content allows lower dosing rate Food contact approvals Improves adhesion of printing inks to non-woven polypropylene Improves adhesion of printing inks to non-woven polypropylene; tie layer component compatibilizes polar and non-polar layers; improves hydrolytic stability and strength of polypropylene / polyamide blends.

  Manufacturer: SI Group | Product Line: Si Group Polymer Modifiers | Package Sizes: 55.115lb Bag, 900lb Box

• 

  POLYOX™ WSR 1105

  POLYOX™ WSR 1105 is a polyethylene oxide thickener. It is a water-soluble resin with a viscosity of 8,800 to 17,600 cP.

  POLYOX™ WSR 1105 has a molecular weight of 900,000 and has the highest viscosity in the POLYOX range. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 8800- 17600 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.5kg Drum

• 

  POLYOX™ WSR 205

  POLYOX™ WSR 205 is a water-soluble thickener with a molecular weight 600,000. The viscosity ranges from 4,500 to 8,800.

  POLYOX™ WSR 205 is a polyethylene oxide with a viscosity of 4500 - 8800 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 6800 - 8800 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 301

  POLYOX™ WSR 301 is a water-soluble resin with a high molecular weight of 4,000,000.

  POLYOX™ WSR 301 is a polyethylene oxide (PEO) with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 303

  POLYOX™ WSR 303 has a molecular weight 7,000,000 and the viscosity ranges from 7,500 to 10,000 cP.

  POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 7500 - 10000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 308

  POLYOX™ WSR 308 is a polyethylene oxide thickener. It has a high molecular weight of 8,000,000 and a viscosity range of 10,000 to 15,000.

  POLYOX™ is a water-soluble resin and used as binder, lubricant, thickener and water retention aid in various applications. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. POLYOX™ WSR 308 has the highest molecular weight of the POLYOX range. Viscosity: 10000 - 15000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic Available in 140 lb and 960 lb drums

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum, 960lb Bag

• 

  POLYOX™ WSR N10

  POLYOX™ WSR N10 is a polyethylene oxide and water soluble thickener. It has a molecular weight of 100,000 and yields a viscosity of 12 to 50 at moderate addition levels.

  POLYOX are water-soluble resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N10 has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. It is a recommended grade for seed coatings. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N10 100 Mesh

  POLYOX™ WSR N10 100 Mesh has the same properties than POLYOX™ WSR N10 100, except this has finer particles.

  POLYOX are water-soluble polyethylene oxide resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N10 mesh has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. This mesh grade has a smaller particle size. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N12K

  POLYOX™ WSR N12K is a water-soluble polymer and has a molecular weight of 1,000,000. It yields a viscosity of 400 to 800 cP at 2% addition level.

  POLYOX are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N12K has a relative low viscosity of 400-800 cP. Viscosity: 400 - 800 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N3000

  POLYOX™ WSR N3000 LS is a water-soluble resin with a relative high molecular weight of 400,000. It yields a viscosity of 2,250 to 4,500 at moderate addition levels.

  POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N3000 LS

  POLYOX™ WSR N3000 LS has the same characteristics as POLYOX™ WSR N3000, except LS version has a low silicon dioxide level of less than 1.5WT%.

  POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.0 - 1.5 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 63.503kg Drum

• 

  POLYOX™ WSR N60K

  POLYOX™ WSR N60K is a PEO polymer with a molecular weight of 2,000,000.

  POLYOX™ WSR 60K is a polyethylene oxide with a viscosity of 2000 - 4000 cP in a 2% aqueous solution. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2000 - 4000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N750

  POLYOX™ WSR N750 is a water-soluble thickener with a molecular weight of 300,000. It has a viscosity range of 600 to 1,200 in a 5% solution.

  POLYOX™ WSR N750 is widely used as seed coatings, wet-tack in paper adhesives, thickener in industrial cleaning products and coatings and paint removers for building and construction. In fluorescent lamp phosphors the N750 is used as binder. POLYOX™ is a polyethylene oxide thickener and water-soluble. Is functions as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Viscosity: 600 - 1,200 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N80

  POLYOX™ WSR N80 is a water-soluble PEO thickener with a molecular weight of 200,000. It has a low viscosity of 65 to 115 cP.

  POLYOX are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX WSR N80 is one of the lower molecular weight grades of the POLYOX range. Viscosity: 65 - 115 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  Sodium PYRION™ 40%

  Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

  Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

  Manufacturer: Janssen PMP | Product Line: Janssen Pmp Microbial Control | Package Sizes: 1200kg Tote, 200kg Drum