BHT, Free Flow

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including free-flowing spherical particles.

Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

Cyclopentane 95 Tech

A technical grade, high-density, high-purity hydrocarbon that is suitable for use in fuels and fuel additives as well as in plasticizers and coatings.

Color: <5 Density: 748 Distillation Range: 48-50 Evaporation Rate: 1.4 Refractive Index: 1.405 Aniline Point: 18 Aromatic Content: <0.001 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 34.6 Kinetic Viscosity: 0.59

Impruvol 20

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.

Sasol's Impruvol 20 is a molten form of Butylated Hydroxy Toluene (BHT), a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

iso-Pentane 99 Pure

A high-purity hydrocarbon also known as 2-methylbutane; commonly used as a process medium for polypropylene and polyethylene manufacturing as well as in personal care applications.

Molecular weight: 72.1 Density: 620 Boiling Point: 27.8 Solidification Point: -160.0°C Refractive Index: 1.3450 Flash Point: <-35 Specific Heat: 2.258 Heat of Vaporization: 339.0 Vapor Pressure: 91.74 Surface Tension: 15.0 Kinematic Viscosity: 0.36

LA-1531/20 Oxidized Petrolatums

Oxidized Petrolatum LA-1531/20 is recommended to be used as a rust preventative and anti- corrosion.

Oxpet LA 1531/20 is compatible with the majority of white oils, mineral base oils and synthetic base stocks. It has been developed to give great rust protection in formulating industrial lubricating oils, greases, hydraulic fluids slushing oils and other protective compounds. Oxidized Petrolatum LA-1531/20 is a long-Chained, branched and cyclic hydrocarbons with a Density ranging 800-900Kg/ m3, a saponification number 47 mg KOH/g and acid number 17-22 mg KOH/G. CAS Number: 64743-01-7 Total Acid Number: mg/KOH/g 17- 22 Density at 100C: kg/m3 800 - 900 Saponification Number: mg/KOH/g 47 (typical) Congealing Point: C 40 - 50 Ash Content: wt, % max. 0.5 Colour, dilute: 8.0 (typical) Flash Point. COC: C min. 150 Excellent water-resistant Non Staining characteristics Corrosion Prevention Lubricating oils Greases Hydraulic Fluids Slushing Oils

Methylcyclohexane 99 Pure

A high-density, high purity hydrocarbon also known as Toluene Hexahydride. It is commonly used in coating formulations, organic synthesis and chromatographic analysis.

Haltermann Carless Methylcyclohexane 99 Pure is an ultra-pure hydrocarbon ideal for highly specialized applications. Methycyclohexane 99 Pure can be used as laboratory reagents or solvents where impurities are prohibited. Molecular weight: 98.2 Density: 769 Boiling point: 100.9 Solidification point: -126.2°C Refractive index: 1.4231 Flash point: -4 Specific heat: 1.875 Heat of vaporization: 323.2 Vapor pressure: 6.18 Surface tension: 23.8 Kinematic viscosity: 0.95

n-Hexane 95 Tech

fuel additive.

A technical grade high-purity hydrocarbon with a wide variety of applications. It can be used as a solvent for varnishes, coatings or adhesives in the printing industry. Other common uses are as an intermediate in laboratory chemicals or as a...

Haltermann Carless n-Hexane 95 Tech is a high purity hydrocarbon ideal for a variety of laboratory & specialized production processes. N-Hexane 95 Tech is suitable as a process medium for polymer production for multiple different rubber types. Color: <5 Density: 665 Distillation Range: 68-70 Evaporation Rate: 1.5 Refractive Index: 1.375 Aniline Point: 68 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: <-20°C Vapor Pressure: 12.5 Kinetic Viscosity: 0.47

n-Nonane 95 Tech

A technical grade high-purity hydrocarbon suitable for crystallization, extraction, HPLC and SMB chromatography processes. This aliphatic solvent is also highly recommended for plastic foams.

Color: <5 Density: 723 Distillation Range: 150-154 Evaporation Rate: 24 Refractive Index: 1.405 Aniline Point: 74 Aromatic Content: <0.03 Non-volatile Matter: <5 Flash Point: +30°C Vapor Pressure: 0.38 Kinetic Viscosity: 0.96

n-Nonane 99 Pure

A pure grade high-purity hydrocarbon used in organic synthesis and as a solvent in biodegradable detergents. This hydrocarbon is also an active ingredient in most varnishes, paints and security printing inks.

Molecular weight: 128.3 Density: 718 Boiling point: 150.8 Solidification point: -53.5°C Refractive index: 1.4054 Flash point: +31°C Specific heat: 2.108 Heat of vaporization: 286.5 Vapor pressure: 0.66 at 25°C Surface tension: 22.9 Kinematic viscosity: 1.00

n-Octane 95 Tech

A technical grade high-purity hydrocarbon typically used in industrial, coating, polymer and pharmaceutical applications.

Haltermann Carless N-Octane 95 Technical Grade is an ideal solvent for a variety of industrial processes including Pharmaceutical grade extractions & laboratory testing. Color: <5 Density: 708 Distillation Range: 124-127 Evaporation Rate: 8.0 Refractive Index: 1.398 Aniline Point: 73 Aromatic Content: <0.01 Non-volatile Matter: <5 Flash Point: +12°C Vapor Pressure: 1.3 Kinetic Viscosity: 0.74

n-Octane 99 Pure

A pure grade high-purity hydrocarbon and one of the standard values in octane rating scale. It is also used as an anti-knock agent for high compression engine fuels, lacquer diluents and a blowing agent for foam rubber.

Molecular weight: 114.2 Density: 705 Boiling point: 125.7 Solidification point: -56.8°C Refractive index: 1.3975 Flash point: +12°C Specific heat: 2.196 Heat of vaporization: 301.1 Vapor pressure: 2.00 at 25°C Surface tension: 21.8 Kinematic viscosity: 0.78

n-Pentane 95% Tech

A technical grade hydrocarbon commonly used for prep laboratory work and cleaning purposes. It can also be used as a blowing agent for styrenic foams and as a refrigerant.

Color: <5 Density: 631 Distillation Range: 36-38 Evaporation Rate: 1.0 Refractive Index: 1.358 Aniline Point: 69 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 40.9 Kinetic Viscosity: 0.39

n-Pentane Pure

ASTM D-5191 standard method for vapor pressure of petroleum products.

ASTM D-5191 WT%: 99.0 Vapor Pressure: 15.08-15.40 Flash Point: <-40°C Molecular Formula: C5H12 Molecular Weight: 72.17 g/mol Boiling Point: 36°C Density: 0.63 g/ml

n-Undecane 95 Tech

A high-purity hydrocarbon with physical and chemical properties similar to lower n-paraffins. This hydrocarbon is commonly used as a solvent in special applications such as home fragrances and security inks.

Color: <10 Density: 744 Distillation Range: 193-198 Refractive Index: 1.417 Aniline Point: 80 Aromatic Content: <0.1 Non-volatile Matter: <5 Flash Point: +67°C Vapor Pressure: 0.04 Kinetic Viscosity: 1.46

Soltrol® 10

Soltrol® 10 is a low aromatic, isoparaffinic solvent with a boiling point of 217°F and a vapor pressure of 114 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 204°F Final Boiling Point: 217°F Flash Point: 13°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 110 Vapor Pressure at 100°F mmHg: 114 Aniline Point: 171°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 100

Soltrol® 100 is a low aromatic, isoparaffinic solvent with a boiling point of 347°F and a vapor pressure of 6.18 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 316°F Final Boiling Point: 347°F Flash Point: 104°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 141 Vapor Pressure at 100°F mmHg: 6.18 Aniline Point: 181°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 125

Soltrol® 125 is a low aromatic, isoparaffinic solvent with a boiling point of 365°F and a vapor pressure of 2.86 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 342°F Final Boiling Point: 365°F Flash Point: 122°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 154 Vapor Pressure at 100°F, mmHg: 2.86 Aniline Point: 184°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 130

Soltrol® 100 is a low aromatic, isoparaffinic solvent with a boiling point of 405°F and a vapor pressure of 2.57 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 370°F Final Boiling Point: 405°F Flash Point: 144°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 165 Vapor Pressure at 100°F mmHg: 2.57 Aniline Point: 188°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 170

Soltrol® 170 is a low aromatic, isoparaffinic solvent with a boiling point of 190°F and a vapor pressure of 0.7 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 429°F Final Boiling Point: 470°F Flash Point: 190°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 188 Vapor Pressure at 100°F, mmHg: 0.7 Aniline Point: 196°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Soltrol® 220

Soltrol® 220 is a low aromatic, isoparaffinic solvent with a boiling point of 556°F and a vapor pressure of 0.36 at 100°F.

Soltrol® is an isoparaffinic solvent with low aromatic content, low surface tension and controlled evaporation making it ideal for a broad range of applications and formulations. Soltrol® solvents do not cause corrosion which make it highly suitable for metalworking and other metal contact uses. Initial Boiling Point: 480°F Final Boiling Point: 556°F Flash Point: 233°F Purity, wt% Isoparaffins: 99+ Average Molecular Weight, g/mole: 197 Vapor Pressure at 100°F, mmHg: 0.36 Aniline Point: 196°F Low odor Low unsaturates Low aromatic content Low toxicity Controlled evaporation Non-corrosive

Sulfolane A, Low Color

Sulfolane A Low is a hydrocarbon similar to the the Sulfolane A Anhydrous but with a much lower APHA color of 10 which is ideal especially for dyeing applications

Sulfolane A Low is also typically used to improve dispersion, for jet printing formulation, or even as a solvent for the synthesis of pharmaceutical intermediates Ash : 0.100 max Distillation - 5% : 282 min SO2 Stability : 20 max Sulfolane, Anhydrous : 99.0 min Water : 0.25 max APHA Color : 200 max Distillation - 95% : 288 max Distillation - 50%, CEL : 283.8 Flash Point, PM : 330 Freezing Point °F: 79 Specific Gravity at 30 F : 1.264

Sulfolane-A Anhydrous

Sulfolane A Anhydrous is a hydrocarbon compound with 99.9% Sulfolane and is commonly used as an ink carrier or solvent for digital image processing

Sulfolane A Anhydrous, also known as Tetramethylene sulfone is widely used as an industrial solvent, typically for the extraction of aromatic hydrocarbons to purify natural gas Ash : 0.100 max Distillation - 5% : 282 min SO2 Stability : 20 max Sulfolane, Anhydrous : 99.0 min Water : 0.25 max Distillation - 95% : 285 max Density @ 30 C : 1.264 Distillation - 50%, CEL : 284.0 Flash Point, PM : 330 Freezing Point : 79 Isopropyl Sulfolanyl Ether : 0.007 Sulfolene-2 : 0.02

WH-1 Oxidized Petrolatums

Oxidized Petrolatum WH-1 is used for rust prevention and anti- corrosion.

Oxpet WH-1 has been created to give rust protection in formulating industrial lubricating oils, greases, slushing oils, hydraulic fluids, etc. Compatible with most mineral base oils, white oils and synthetic base stocks, Oxidized Petrolatum WH-1 is a Long-Chained, branched and cyclic hydrocarbons with a Density ranging 850-950Kg/ m3, a saponification number 100 mg KOH/g and acid number 48-53 mg KOH/G. CAS Number: 64743-01-7 Total Acid Number: mg/KOH/g 48- 53 Density at 100C: kg/m3 850 - 950 Saponification Number: mg/KOH/g 110 (typical) Congealing Point: C 55 - 65 Ash Content: wt, % max. 0.5 Colour, dilute: 8.0 (typical) Flash Point. COC: C min. 150 Corrosion Prevention Water Resistance Non Staining Characteristics Industrial Lubricant Oils Greases Hydraulic Fluids Slushing Oils