LANXESS Microbial Control Selector

AMICAL™ 48 is an in-can and dry film fungicide based on 95% active of diiodomethyl-p-tolylsulfone.

AMICAL™ Flowable is a water-based dispersion formulation based on the active Diiodomethyl-p-tolylsulfone. It is recommended for use in water-based formulations where high shear mixing is not used.

AMICAL™ WP is a wettable powder based on the active Diiodomethyl-p-tolylsulfone. AMICAL™ WP is designed to be used in situations where dry blending of ingredients is desired.

BIOBAN™ 200 Antimicrobial is a low-VOC dichloro-octylisothiazolinone (DCOIT) dry film preservative and antimicrobial additive that provides fungal and mold protection to paints, coatings, and building materials.

BIOBAN™ BP-30 is a bronopol-based, broad-spectrum biocide with numerous FDA clearances and is especially effective in combination with other biocides.

BIOBAN™ BP-PLUS is a 99% solid bronopol-based, broad-spectrum biocide with numerous FDA clearances.

BIOBAN™ BTCM is an EPA approved in-can preservative for exceptional protection against bacteria and fungi. BTCM is excellent for use in cleaners, coatings, inks, building materials and agriculture applications.

Dual active in-can preservative based on 12% BIT + 8% ZPT providing efficacy against both bacteria and fungi in the wet-state.

BIOBAN™ O 45 is a broad spectrum fungicide (not algaecide) based on a 45% active concentration of OIT

72% active ingredient (Na-OPP), solid formulation.

DOWICIL™ QK-20 is an industrial hygiene biocide that is based on 20% active 2,2-dibromo-3-nitrilopropionaminde (DBNPA). It offers immediate action to kill bacteria, fungi, and algae for use in industrial hygiene disinfection, rapid decontamination, and clean-up raw materials and fouled solutions.

KATHON™ LX 1.5% is an isothiazolinone-based preservative used to protect polymers, coatings, adhesives, and pigments. KATHON™ LX 1.5% is effective against bacteria and fungi at a low use rate, making it an excellent economical alternative to many other preservatives.

A dual in-can bacteriacide / fungicide based on bronopol and CMIT / MIT chemistry. This product is approved for certain industrial uses (see federal label).

A preservative based on bronopol and benzisothiazolinone (BIT) and approved for various industrial uses.

ROCIMA™ 63 is a dry film preservative blend that contains three different active ingredients, carbendazim, diuron, and octylisothiazolinone, for exceptional protection against fungi, algae, and mold.

ROCIMA™ BT 2S is a 19% benzisothiazolinone (BIT) preservative solubilized in dipropylene glycol (DPG) that offers excellent protection and stability at high temperatures for use in crop protection, coatings, building materials, and many other industrial applications.

ROCIMA™ BT NV2 is a zero-VOC, aqueous dispersion 1,2-Benzisothiazolin-3-one (BIT) in-can preservative. It offers broad-spectrum protection against bacteria and fungi in a wide variety of industrial and agricultural formulations.

ROZONE™ 2000 is a dichlorooctylisothiazolinone (DCOIT) dry film preservative supplied in a liquid form to protect paints, coatings, adhesives, and building materials against the defacement and growth of fungi and algae.

UCARCIDE™ 25 Antimicrobial is a 25% glutaraldehyde product with outstanding performance and versatility. This product provides broad efficacy, is biodegradable and is also non-carcinogenic, non-persistent and non-bio-accumulative. This product is registered for antimicrobial use.

UCARCIDE™ 50 Antimicrobial is a glutaraldehyde based biocide similar to UCARCIDE™ 25, except for the 50% active content. It is EPA approved for antimicrobial use in a wide range of industrial and consumer applications.